ADC conflict with softedevice

RE: ADC conflict with softedevice

Kenneth — Mon, 25 Feb 2019 16:10:56 GMT

Good that you were able to get passed the issue, unfortunately though I don't have a clue what was the issue, sometimes I have found that "clean target" project and "rebuild all target files" is worth a try when there are odd issues.

Best regards,
Kenneth

RE: ADC conflict with softedevice

Stigui — Thu, 14 Feb 2019 17:27:09 GMT

Thank’s for answer.

I tried the code you told me to try, the code did work on my electronic card. I cheked init_saadc function, saadc_sampling_event_init function and saadc_sampling_event_enable. Those 3 functions were the same in my code, but my own code still didn’t work. I checked principals #define in sdk_config.h, they were equals.

So I deleted on your code the initialization of softedvice, and it was still working. So, I finally decided to copy all my code (3 C files, 2 headers and the main loop) on your project. The code run and saadc works.

You’ll understand that I’m happy and disappointed (Schrödinger's happiness?) because I can’t know where my mistake was.

Have you any idea where the error should come from? Sdk_config ? Flash start address?

Thanks for the help,

Best regards

RE: ADC conflict with softedevice

Kenneth — Thu, 14 Feb 2019 13:14:09 GMT

Try the code example you can find in this reply as guidance:
https://devzone.nordicsemi.com/support-private/support/216869#permalink=406240

Best regards,
Kenneth