i couldn't find my device on nrf connect toolbox

RE: i couldn't find my device on nrf connect toolbox

Simon — Wed, 20 Feb 2019 09:36:50 GMT

Have you made sure you are not already connected to another phone, then the device will not be advertising and won't show up in nRF Toolbox.

Another solution is suggested here.

Best regards,

Simon

RE: i couldn't find my device on nrf connect toolbox

ps_anu — Fri, 15 Feb 2019 12:34:23 GMT

yes i have checked , i have checked with five phones out of five three phones have worked , but remaining two phones i couldn't able to connect , appears no device found . look at this pic you will get

RE: i couldn't find my device on nrf connect toolbox

Simon — Fri, 15 Feb 2019 10:23:40 GMT

Could you try to run a test: Turn on the chip running the ble_app_uart peripheral project, and then check all the four different phones at the same time. Then you will narrow down the problem, if the device only appears on one phone, then the source of the problem is at the phones. Since you tested this at different times, then the chip running the ble_app_uart might be behaving different from time to time, and the source of the problem is on the chip side.

Give me an update after doing this, and I'll try to help you further.

Best regards,

Simon