.emproject

RE: .emproject

AndreasF — Sat, 02 Mar 2019 07:38:45 GMT

Hi.

It would be great if you could post it in a new ticket, since this ticket now is quite messy.

Best regards,

Andreas

RE: .emproject

hmolesworth — Sat, 02 Mar 2019 02:36:42 GMT

That file is here on Windows 8 inside the installed git stuff::

.\Zephyr\boards\arm\nrf9160_pca10090

Did you manually create the build subdirectory before selecting it? I had to .. and do a Rebuild Solution of course.

RE: .emproject

wischmi2 — Sat, 02 Mar 2019 02:16:41 GMT

OK so I went back to the getting started assistant and went back through all the steps and made sure they verified ok. I tried to open the project again and this time it did generate the .emproject file but I have a different error. I'm not sure how the admins want me to treat this, close this thread and start a new one?

Anyways, i'm posting the error info below. It looks like it doesn't have the full path?

Loading solution lte_ble_gateway.emProject
Executing load commands
C:/Program Files/CMake/bin/cmake.exe -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=C:/Program Files (x86)/Nordic Semiconductor/nrf5x/bin/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=C:/gnuarmemb -BC:/Program Files (x86)/Nordic Semiconductor/nrf5x/bin/ncs/nrf/samples/nrf9160/lte_ble_gateway/Build -HC:/Program Files (x86)/Nordic Semiconductor/nrf5x/bin/ncs/nrf/samples/nrf9160/lte_ble_gateway -DPYTHON_EXECUTABLE=C:/Python37/python.exe -DCMAKE_MAKE_PROGRAM=C:/ProgramData/chocolatey/bin/ninja.exe -DDTC=C:/ProgramData/chocolatey/bin/dtc.exe -DDTC_OVERLAY_FILE=C:/Program Files (x86)/Nordic Semiconductor/nrf5x/bin/ncs/nrf/samples/nrf9160/lte_ble_gateway/nrf9160_pca10090.overlay
-- Found PythonInterp: C:/Python37/python.exe (found suitable version "3.7.2", minimum required is "3.4")
-- Selected BOARD nrf9160_pca10090
Zephyr version: 1.13.99
CMake Error at C:/Program Files (x86)/Nordic Semiconductor/nrf5x/bin/ncs/zephyr/cmake/kconfig.cmake:101 (message):
File not found: C:/Program/nrf9160_pca10090_defconfig
Call Stack (most recent call first):
C:/Program Files (x86)/Nordic Semiconductor/nrf5x/bin/ncs/zephyr/cmake/app/boilerplate.cmake:259 (include)
CMakeLists.txt:9 (include)

-- Configuring incomplete, errors occurred!
Project load failed
Reported error: solution load command failed (1)

RE: .emproject

wischmi2 — Sat, 02 Mar 2019 00:37:52 GMT

Oh, but I'm not running on a apple mac, just a regular pc, so maybe thats why I don't see these paths filled in. However, do they still need to be filled in even for the PC version?

RE: .emproject

wischmi2 — Sat, 02 Mar 2019 00:13:13 GMT

OK, so maybe this is the source of the problem. The screenshot you show above looks like the Getting Started Assistant, but no where in my assistant does it show that work step.

RE: .emproject

wesaymorning — Fri, 01 Mar 2019 01:27:58 GMT

RE: .emproject

wischmi2 — Fri, 01 Mar 2019 01:18:13 GMT

Hi wesaymorning,

Wow, I went and looked in the Tools->Options directory that you mentioned and all of those "Executables" are just blank. There is nothing setup for any of them. I don't understand how that could be? Which part of the Getting Started guide would have done that?

RE: .emproject

hmolesworth — Thu, 28 Feb 2019 17:19:54 GMT

I have this:

Loading solution at_client.emProject
Executing load commands
cmake -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=C:/Projects/ncs/Zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=C:/gnuarmemb -BC:/Projects/ncs/nrf/samples/nrf9160/at_client/build -HC:/Projects/ncs/nrf/samples/nrf9160/at_client
Zephyr version: 1.14.0
-- Found PythonInterp: C:/Python37/python.exe (found suitable version "3.7.2", minimum required is "3.4") 
-- Selected BOARD nrf9160_pca10090
-- Loading C:/Projects/ncs/Zephyr/boards/arm/nrf9160_pca10090/nrf9160_pca10090.dts as base
-- Overlaying C:/Projects/ncs/Zephyr/dts/common/common.dts
Parsing Kconfig tree in C:/Projects/ncs/Zephyr/Kconfig
Loading C:/Projects/ncs/nrf/samples/nrf9160/at_client/build/zephyr/.config as base
Configuration written to 'C:/Projects/ncs/nrf/samples/nrf9160/at_client/build/zephyr/.config'
-- Cache files will be written to: C:\Users\Hugh\AppData\Local/.cache/zephyr
-- The C compiler identification is GNU 8.2.1
-- The CXX compiler identification is GNU 8.2.1
-- The ASM compiler identification is GNU
-- Found assembler: C:/gnuarmemb/bin/arm-none-eabi-gcc.exe
-- Performing Test toolchain_is_ok
-- Performing Test toolchain_is_ok - Success
Including module(s): 
-- Configuring done
-- Generating done
-- Build files have been written to: C:/Projects/ncs/nrf/samples/nrf9160/at_client/build
C:/Projects/arm_segger_embedded_studio_v414_win_x64_nordic/bin/ninja_import zephyr/zephyr.elf zephyr/liboffsets.a zephyr/liboutput_lib.a zephyr/libpriv_stacks_output_lib.a zephyr/app_sizing_prebuilt.elf zephyr/zephyr_prebuilt.elf zephyr/zephyr_app_sizing_prebuilt.elf zephyr/priv_stacks_prebuilt.elf
Loading solution build.emProject
Mapping project information
Mapping project zephyr/zephyr.elf
Mapping project zephyr/include/generated/offsets.h
Mapping project zephyr/include/generated/driver-validation.h
Mapping project zephyr/include/generated/kobj-types-enum.h
Mapping project zephyr/include/generated/otype-to-str.h
Mapping project zephyr/include/generated/syscall_list.h
Mapping project zephyr/misc/generated/syscalls.json
Mapping project zephyr/include/generated/syscall_dispatch.c
Mapping project zephyr/include/generated/syscall_macros.h
Mapping project zephyr/isr_tables.c
Mapping project zephyr/zephyr_prebuilt.elf
Mapping project zephyr/linker.cmd
Mapping project app/libapp.a
Mapping project zephyr/libzephyr.a
Mapping project zephyr/arch/arch/arm/core/libarch__arm__core.a
Mapping project zephyr/arch/arch/arm/core/cortex_m/libarch__arm__core__cortex_m.a
Mapping project zephyr/arch/arch/arm/core/cortex_m/mpu/libarch__arm__core__cortex_m__mpu.a
Mapping project zephyr/lib/libc/minimal/liblib__libc__minimal.a
Mapping project zephyr/subsys/net/libsubsys__net.a
Mapping project zephyr/nrf/lib/bsdlib/lib..__nrf__lib__bsdlib.a
Mapping project zephyr/nrf/lib/at_host/lib..__nrf__lib__at_host.a
Mapping project zephyr/drivers/serial/libdrivers__serial.a
Mapping project zephyr/kernel/libkernel.a
Mapping project zephyr/linker_pass_final.cmd
Populating dynamic folders
Populating folder ‘dts files’
Preparing solution ‘at_client’
Preparing solution ‘build’
Preparing project ‘zephyr/zephyr.elf’
Preparing project ‘app/libapp.a’
Preparing project ‘zephyr/libzephyr.a’
Preparing project ‘zephyr/arch/arch/arm/core/libarch__arm__core.a’
Preparing project ‘zephyr/arch/arch/arm/core/cortex_m/libarch__arm__core__cortex_m.a’
Preparing project ‘zephyr/arch/arch/arm/core/cortex_m/mpu/libarch__arm__core__cortex_m__mpu.a’
Preparing project ‘zephyr/lib/libc/minimal/liblib__libc__minimal.a’
Preparing project ‘zephyr/subsys/net/libsubsys__net.a’
Preparing project ‘zephyr/nrf/lib/bsdlib/lib..__nrf__lib__bsdlib.a’
Preparing project ‘zephyr/nrf/lib/at_host/lib..__nrf__lib__at_host.a’
Preparing project ‘zephyr/drivers/serial/libdrivers__serial.a’
Preparing project ‘zephyr/kernel/libkernel.a’
Restoring state from previous session
Preparing to load data
Loading session data from file
SEGGER Embedded Studio is ready to use

I don't see any errors .. other than I'm using Windows 8 which is a serious error if ever there was one as any fule kno .. following comments above I didn't originally populate the build options, but doing so just now using these paths doesn't make any difference:

C:/Program Files/CMake/bin/cmake.exe
C:/ProgramData/chocolatey/bin/dtc.exe
C:\ProgramData\chocolatey\bin\ninja.exe
C:/Python37/python.exe

Edit: One of the git repos was at incorrect version, corrected now and all builds - phew!

RE: .emproject

wesaymorning — Thu, 28 Feb 2019 17:07:38 GMT

Morning.

After selecting & configuring File -> Open nRF Connect SDK Project, the output of the Segger trying to load the project can be seen in the 'Output' box at the bottom of the screen. This is where I noticed that the cmake command wasn't being found. I then verifiied/fixed the commands in Tools -> Options -> nRF Connect.

As a result, the project loaded successfully & built.

Loading solution at_client.emProject
Executing load commands
/usr/local/opt/bin/cmake -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=/Users/jonnie/Development/nRF9160/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=/opt/gnuarmemb -B/Users/jonnie/Development/nRF9160/ncs/nrf/samples/nrf9160/at_client/build -H/Users/jonnie/Development/nRF9160/ncs/nrf/samples/nrf9160/at_client -DPYTHON_EXECUTABLE=/usr/local/bin/python3 -DCMAKE_MAKE_PROGRAM=/usr/local/bin/ninja -DDTC=/usr/local/bin/dtc
-- Found PythonInterp: /usr/local/bin/python3 (found suitable version "3.6.7", minimum required is "3.4") 
-- Selected BOARD nrf9160_pca10090

Zephyr version: 1.13.99
Parsing Kconfig tree in /Users/jonnie/Development/nRF9160/ncs/zephyr/Kconfig
Loading /Users/jonnie/Development/nRF9160/ncs/nrf/samples/nrf9160/at_client/build/zephyr/.config as base

RE: .emproject

hmolesworth — Thu, 28 Feb 2019 16:44:20 GMT

Yes, it fixed the project issue but I didn't yet get past the build issues:

C:\Projects\ncs>\Python37\Scripts\pip3 install --user -r Zephyr\scripts\requirements.txt
C:\Projects\ncs>\Python37\Scripts\pip3 install --user -r nrf\scripts\requirements.txt

This is the build issue, which I haven't checked yet. I installed the licence and pulled in the CMSIS packages.

1> Combining ‘zephyr/include/generated/offsets.h’
1> Traceback (most recent call last):
1>   File "C:/Projects/ncs/Zephyr/scripts/gen_offset_header.py", line 72, in <module>
1>     input_file = open(args.input, 'rb')
1> FileNotFoundError: [Errno 2] No such file or directory: 'C:/Projects/ncs/nrf/samples/nrf9160/at_client/build/zephyr/CMakeFiles/offsets.dir/arch/arm/core/offsets/offsets.c.obj'
Build failed

The directory is present but currently empty. Not sure whether it is a build sequence issue but disabling parallel builds does not correct this issue.

There were lots of path warnings when running pip3 assuming user "MoiIci":

 Running setup.py install for whelk ... done
 Running setup.py install for docopt ... done
 Running setup.py install for git-spindle ... done
 Running setup.py install for hub ... done
 Running setup.py install for arrow ... done
 The script gitlint.exe is installed in 'C:\Users\MoiIci\AppData\Roaming\Python\Python37\Scripts' which is not on PATH.
 Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
 Running setup.py install for pyelftools ... done
 Running setup.py install for future ... done

Adding to the path didn't seem to help:

C:\Users\MoiIci\AppData\Roaming\Python\Python37\Scripts

RE: .emproject

AndreasF — Thu, 28 Feb 2019 07:46:42 GMT

Hi again.

wischmi2 I've replied in the other ticket you are active in, can you please check that. Also I think you only should have to check the options in Tools -> Options -> nRF Connect if you are running MAC.

Best regards,

Andreas

RE: .emproject

wesaymorning — Thu, 28 Feb 2019 03:15:29 GMT

Brian,

Also check that the commands listed in Tools -> Options -> nRF Connect are valid. I also found that the path I had listed for cmake on my setup was invalid. Once this was fixed, the application was able to create a valid project file.

RE: .emproject

wischmi2 — Thu, 28 Feb 2019 02:08:00 GMT

Hi Andreas,

Yes, I attempted this but it didn't make a difference.

wesaymorning - what happens now that you got it fixed, does it create a build directory when you click ok?

Brian

RE: .emproject

AndreasF — Wed, 27 Feb 2019 06:44:15 GMT

Hi.

Did you try the same as wesaymorning did?

pip3 install -r zephyr/scripts/requirements.txt
pip3 install -r nrf/scripts/requirements.txt

Best regards,

Andreas

RE: .emproject

hmolesworth — Wed, 27 Feb 2019 02:43:49 GMT

Nice .. what's the Windows magic? :-)

RE: .emproject

wesaymorning — Wed, 27 Feb 2019 02:21:16 GMT

Found my issue. The following commands had failed during the setup. Once this was resolved I was able to load the project file.

pip3 install --user -r zephyr/scripts/requirements.txt
pip3 install --user -r nrf/scripts/requirements.txt

RE: .emproject

wischmi2 — Wed, 27 Feb 2019 01:28:53 GMT

Yes, I’m still getting the pop up similar to what wesaymorning posted.

RE: .emproject

wesaymorning — Wed, 27 Feb 2019 01:02:47 GMT

Am seeing the same issue as wischmi2. My setup is MAC OSX 10.14.2, Segger 4.14.

RE: .emproject

AndreasF — Tue, 26 Feb 2019 12:37:08 GMT

Hi.

So you are not getting this "pop-up" anymore? If you are getting it, could you share a screenshot of it?

Best regards,

Andreas

RE: .emproject

wischmi2 — Tue, 26 Feb 2019 02:06:11 GMT

Hi Andreas,

Yes, I completed the getting started assistant. I was able to connect to my board and get the "gps" signal and I can flip the switch and see it change status in the RFcloud. I am using 64-bin Segger v4.14.

RE: .emproject

AndreasF — Mon, 25 Feb 2019 09:22:21 GMT

Hi.

Which version of Segger are you using? Have you done the nRF Connect Getting Started Assistant?

Best regards,

Andreas