RE: nrf52840 file transfer and mesh with epaper display

Øyvind — Wed, 06 Mar 2019 10:34:24 GMT

Hi Syam,

[quote][/quote]

We are trying to make a mesh network for image file transfer and display the same in an e paper display.

How many nodes are you looking to use in the Mesh network? Please be aware of:

"Bluetooth Mesh primarily targets simple control and monitoring applications, like light control or sensor data gathering. The packet format is optimized for small control packets, issuing single commands or reports, and is not intended for data streaming or other high-bandwidth applications."

Depending on how many nodes you want, sending large packets over the mesh network will take time. See a similar case here. Instaburst could be a possible solution:
"In optimal conditions, Instaburst is able to transmit 498 bytes of raw advertising data every advertising interval, providing a 160kbps bearer to the upper layers for 20ms advertisement intervals. The mesh packets have significant overhead however, and under the same conditions, the maximum theoretical access layer payload throughput is around 60kbps."

Using BLE to transfer big files is discussed in this case. Be aware that BLE only handles up to 20 concurrent connections.

There are no examples for file transfer using mesh or instaburst. For BLE we have the Trivial File Transfer Protocol (TFTP) library which may be a solution.

[quote user=""]Also evaluated RTOS support using RIOT and zephyr OS and found that there is no Nordic support for the same[/quote]

Have you looked at the FreeRTOS support for our devices?

[quote user=""]We are using Fanstel BWG840F as Gateway device[/quote]

From the webpage of this product I that it's using a module which includes Nordic nRF52840. You will have to look at their documentation, but I assume you will program this device as any other Nordic device.

Best regards,
Oeyvind