how to configured PA/LNA in mesh sdk

RE: how to configured PA/LNA in mesh sdk

wjj — Mon, 28 Oct 2024 11:33:33 GMT

我想在 mesh5.0.0 上使用 pa lna 模块。是否有任何参考文档?

RE: how to configured PA/LNA in mesh sdk

Bjørn Kvaale — Wed, 03 Apr 2019 10:07:07 GMT

If you want to have the provisioner & the client on one device, you will need to merge the provisioner code with the client code. The provisioner can then internally provision the generic on off client model first (like it is done in the light switch example) & then provision other server nodes later.

You could also provision either via nRF Mesh or via the interactive python script we have here.

RE: how to configured PA/LNA in mesh sdk

t_ping — Mon, 01 Apr 2019 09:33:16 GMT

thank you,we successfully configured and tested this external PA with mesh_v2.2.0,but I want to mesh have provisioner and client two ROLE,but mesh_v2.2.0 have provisioner or client,so I use mesh_v1.0.1(it is provisioner and client two roles)。mesh_v2.2.0(provisioner) how to have provisioner and client two roles,thanks

RE: how to configured PA/LNA in mesh sdk

Bjørn Kvaale — Mon, 01 Apr 2019 08:49:44 GMT

Regarding your first question, PA/LNA documentation was updated in the mesh sdk v2.2.0, but I believe you should be able to use this documentation to get PA/LNA to work in mesh sdk v2.1.1. This case may also be helpful.

You could also consider increasing the TX power on the 52832 from 0 to 4 dBm. Take a look at this case for more info.

Regarding your second question, this is not a good idea, as the mesh v1.0.1 is outdated. In addition, this mesh sdk does not have a Bluetooth Mesh qualified stack, which means you could not get a product Bluetooth Mesh qualified. If you are using v1.0.1 in development, I would strongly urge you to migrate to at least the v2.0.1 mesh sdk (see the migration guide in the v2.0.1 mesh sdk download).