How to resolve these issues

RE: How to resolve these issues

Joakim Jakobsen — Mon, 08 Apr 2019 12:19:24 GMT

Maybe you should take a look at this guide:

nRF5 Series: Developing on Windows with ARM Keil MDK

Best regards,
Joakim

RE: How to resolve these issues

chandana k v — Thu, 04 Apr 2019 08:50:21 GMT

I followed the same instructions what you have said but still it is showing the same thing that software pack is not installed.So after installing the mdk software the pop up of packet installer appeared so there i followed the same instruction as you said so when i tried to build the example project it is showing the same thing and again when i tried to install software pack i have clicked packet installer icon then this came

then i have tried to install but the dialogue ""cannot remove read only from"" is coming is i click on retry button it is showing the same thing and if i click on cancel i couldn't able to select the devices/boards/packs ..means it is not expanding when i click on the + button... and also i have doubt that which keil software do i need to download for this board i have downloaded MDK software......... could you plz tell me to resolve these issues.

RE: How to resolve these issues

chandana k v — Thu, 04 Apr 2019 08:36:15 GMT

Hi,

Thanks for replying.

I haven't seen the tutorial of using keil with sdk. Can you share the link plz to read all the files.

RE: How to resolve these issues

Joakim Jakobsen — Wed, 03 Apr 2019 10:32:27 GMT

Hi.

From the window in Keil, it seems that you need to install the DeviceFamilyPack v.8.11.1

Can you double check that that version is installed?

Go to Pack installer -> Select the board

Under Packs -> Expand the NordicSemiconductor::nRF_DeviceFamilyPack and see if the correct version is installed. (See picture below).

Best regards,
Joakim

RE: How to resolve these issues

awneil — Tue, 02 Apr 2019 12:31:54 GMT

Note that you can get a picture of just the current window - rather than the entire screen - by using Alt+PrintScreen.

Have you followed the tutorials on how to use Keil with the Nordic SDK?

The easiest way is to start with one of the ready-made examples - have you tried that?