SEGGER emStudio build project failure

RE: SEGGER emStudio build project failure

JNair — Thu, 02 May 2019 12:00:40 GMT

the problem is fixed and now i can run AT client on the DK. thanks

RE: SEGGER emStudio build project failure

JNair — Thu, 02 May 2019 11:59:33 GMT

Thanks Gurkan. i reinstalled the SDK and its working.

RE: SEGGER emStudio build project failure

Samuel — Tue, 16 Apr 2019 15:38:30 GMT

When I run at_client I get this printed

It states that the AT host sample have started which I can't see in your output. Have you built and run your at_client sample or something else? I have LTE-M as well.

RE: SEGGER emStudio build project failure

JNair — Tue, 16 Apr 2019 07:52:59 GMT

I had one more issue. If you could suggest something for that as well, it would be really helpful.

I had activated the iBasis sim which i got along with the DK then only i tried connecting on the link monitor. I am from Belgium and LTE-M is supported here. Even the modem is showing OFF, red colour.

After launching LTE link monitor, i did reset DK and zephyr OS booted but its showing some error

[1;31m<err> net_if.net_if_init: There is no network interface to work with!

RE: SEGGER emStudio build project failure

JNair — Tue, 16 Apr 2019 07:37:28 GMT

Thanks Samuel. Will try installing it from scratch and try again.

RE: SEGGER emStudio build project failure

JNair — Tue, 16 Apr 2019 07:35:34 GMT

Thanks Gurkan for the help. I will try doing that.

RE: SEGGER emStudio build project failure

Gurkan — Mon, 15 Apr 2019 17:40:36 GMT

[quote userid="78907" url="~/f/nordic-q-a/46035/segger-emstudio-build-project-failure/182077"]/Documents/MyScripts/Nordic_NBIot/ncs/nrf/samples/nrf9160/spm/nrf9160_pca10090.overlay
arm-none-eabi-gcc.exe: error: CreateProcess: No such file or directory[/quote]

Looks like it could not find gnu tool chain.
I'd suggest to simply your folder location, just do a clear installation from scratch and use;
for gnu toolchain -> c:\gnuarmemb
For nordic sdk -> c:\nordic\ncs.

RE: SEGGER emStudio build project failure

Samuel — Mon, 15 Apr 2019 14:53:13 GMT

Hi JNair

I am not sure about how to fix you problem since I am pretty new here. But you could try doing as Gurkan suggested a few messages above by running "zephyr-env.cmd" in the zephyr folder to set you variables and try again. Since it seems to be some sort of variable problem from what I can tell.

/Samuel

RE: SEGGER emStudio build project failure

JNair — Mon, 15 Apr 2019 11:35:08 GMT

Hi Samuel,

I am getting the same error as you were getting. I dint install it twice. so i dont think it has anything to do with the folder names.

C:\Users\jnai\OneDrive\Documents\MyScripts\Nordic_NBIot\ncs\nrf\samples\nrf9160\spm\build>cmake -DBOARD=nrf9160_pca10090 -GNinja ..
-- Using application from 'C:/Users/jnai/OneDrive/Documents/MyScripts/Nordic_NBIot/ncs/nrf/samples/nrf9160/spm'
Zephyr version: 1.14.0
-- Found PythonInterp: C:/Python37/python.exe (found suitable version "3.7.3", minimum required is "3.4")
-- Selected BOARD nrf9160_pca10090
-- Found west: C:/Python37/Scripts/west.exe (found suitable version "0.5.8", minimum required is "0.5.6")
-- Cache files will be written to: C:\Users\jnai\AppData\Local/.cache/zephyr
-- Loading C:/Users/jnai/OneDrive/Documents/MyScripts/Nordic_NBIot/ncs/zephyr/boards/arm/nrf9160_pca10090/nrf9160_pca10090.dts as base
-- Overlaying C:/Users/jnai/OneDrive/Documents/MyScripts/Nordic_NBIot/ncs/zephyr//dts/common/common.dts
-- Overlaying C:/Users/jnai/OneDrive
-- Overlaying -
-- Overlaying /Documents/MyScripts/Nordic_NBIot/ncs/nrf/samples/nrf9160/spm/nrf9160_pca10090.overlay
arm-none-eabi-gcc.exe: error: CreateProcess: No such file or directory
CMake Error at C:/Users/jnai/OneDrive/Documents/MyScripts/Nordic_NBIot/ncs/zephyr/cmake/dts.cmake:94 (message):
command failed with return code: 1
Call Stack (most recent call first):
C:/Users/jnai/OneDrive/Documents/MyScripts)/Nordic_NBIot/ncs/zephyr/cmake/app/boilerplate.cmake:486 (include)
CMakeLists.txt:3 (include)

-- Configuring incomplete, errors occurred!

I was not able to do git checkout c1939d963fe2c18013ffb8de0bd8f6fc1d91724d

error: The following untracked working tree files would be overwritten by checkout:

The process was getting aborted.

Can you please suggest how to fix this? Thanks in advance!

RE: SEGGER emStudio build project failure

Samuel — Thu, 11 Apr 2019 15:41:10 GMT

After checking and verifying my variables and changing my folder name for my new install it works. When running cmake it was looking for files in a path that didn't exist anymore (It did not look in the path specified in the variables for some reason but got the old path). So I just renamed my folder to the old name.

Anyway it works now, thank you for your help!

RE: SEGGER emStudio build project failure

Gurkan — Thu, 11 Apr 2019 14:19:31 GMT

While verifying the variables you only need to run the command as "echo %ZEPHYR_BASE%" and the output should point your folder regarding with variable. in your case it should be "C:/Users/sjonsson2/new_git/ncs/zephyr"

By the way before doing you need to run "zephyr-env.cmd" in your zephyr folder. That script will setup your variables

RE: SEGGER emStudio build project failure

Samuel — Thu, 11 Apr 2019 14:15:16 GMT

Yes I tried it. Verified variables:

And then the build:

So it seem to be the same error for building via cmd as well

RE: SEGGER emStudio build project failure

Gurkan — Thu, 11 Apr 2019 13:58:52 GMT

Sorry my bad I meant 2018, I still cannot accept that we are in 2019 🙂
Have you tried to build it with command prompt?

And before building can you check variables are set right by

echo %ZEPHYR_BASE%
c:\Nordic\ncs\zephyr\

echo %ZEPHYR_TOOLCHAIN_VARIANT%
gnuarmemb

echo %GNUARMEMB_TOOLCHAIN_PATH%
C:\gnuarmemb

mkdir build & cd build
cmake -DBOARD=nrf9160_pca10090 -GNinja ..

RE: SEGGER emStudio build project failure

Samuel — Thu, 11 Apr 2019 13:45:13 GMT

I have 7-2018-q2-update as suggested in the getting started guide, it is not the latest version. Is that the one you mean or is it a 2017 release that must be used?

RE: SEGGER emStudio build project failure

Gurkan — Thu, 11 Apr 2019 13:35:25 GMT

I think you have an issue with GNU, which version do you have? I know it's not working with latest version you need to have "2017 q2".

RE: SEGGER emStudio build project failure

Samuel — Thu, 11 Apr 2019 13:27:38 GMT

I get the following output:

Loading solution spm.emProject
Executing load commands
cmake -GNinja -DBOARD=nrf9160_pca10090 -DBOARD_DIR=C:/Users/sjonsson2/git_nrf/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=c:/gnuarmemb -BC:/Users/sjonsson2/git_nrf/ncs/nrf/samples/nrf9160/spm/build_nrf9160_pca10090 -HC:/Users/sjonsson2/git_nrf/ncs/nrf/samples/nrf9160/spm -DDTC_OVERLAY_FILE=C:/Users/sjonsson2/git_nrf/ncs/nrf/samples/nrf9160/spm/nrf9160_pca10090.overlay -DEXTRA_KCONFIG_TARGETS=menuconfig_ses -DEXTRA_KCONFIG_TARGET_COMMAND_FOR_menuconfig_ses=C:/Users/sjonsson2/arm_segger_embedded_studio_v416_win_x64_nordic/html/configure_nordic_project_menuconfig.py
CMake Error at CMakeLists.txt:3 (include):
include could not find load file:

C:/Users/sjonsson2/new_git/ncs/zephyr/cmake/app/boilerplate.cmake

-- The C compiler identification is GNU 8.2.1
-- The CXX compiler identification is unknown
-- Check for working C compiler: C:/Users/sjonsson2/arm_segger_embedded_studio_v416_win_x64_nordic/bin/cc.exe
-- Check for working C compiler: C:/Users/sjonsson2/arm_segger_embedded_studio_v416_win_x64_nordic/bin/cc.exe -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Detecting C compile features
-- Detecting C compile features - failed
CMake Error at CMakeLists.txt:4 (project):
No CMAKE_CXX_COMPILER could be found.

Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.

-- Configuring incomplete, errors occurred!
See also "C:/Users/sjonsson2/git_nrf/ncs/nrf/samples/nrf9160/spm/build_nrf9160_pca10090/CMakeFiles/CMakeOutput.log".
See also "C:/Users/sjonsson2/git_nrf/ncs/nrf/samples/nrf9160/spm/build_nrf9160_pca10090/CMakeFiles/CMakeError.log".
Project load failed
Reported error: solution load command failed (1)

RE: SEGGER emStudio build project failure

Gurkan — Thu, 11 Apr 2019 13:02:41 GMT

Can you share the output log of Segger when you get the error? That might help to point the issue

RE: SEGGER emStudio build project failure

Samuel — Thu, 11 Apr 2019 11:09:26 GMT

Hi,

thanks for the tip Gurkan. I tried doing as the link you provided suggested:

git checkout c1939d963fe2c18013ffb8de0bd8f6fc1d91724d

west update

But unfortunately the same problem is still present.

RE: SEGGER emStudio build project failure

Gurkan — Wed, 10 Apr 2019 16:14:48 GMT

Hi Samuel,

Check out this thread, that has worked for me.

Thread Link