Adding Blinky features in my Example

RE: Adding Blinky features in my Example

Anubhav — Tue, 23 Apr 2019 04:24:28 GMT

[quote userid="78551" url="~/f/nordic-q-a/46417/adding-blinky-features-in-my-example/182953"]This can only be done using constants, which m_lbs.uuid_type is not.[/quote]

Then how can I advertise the UUID for the led button in my example? Can you help me with this!

The complete main.c file is attached below for reference:

#include "app_error.h"
#include "ble_err.h"
#include "ble_srv_common.h"
#include "boards.h"
#include "app_button.h"
#include "ble_lbs.h"
#include "sdk_common.h"
#include "ble_nus.h"
#include "nrf.h"
#include "ble_hci.h"
#include "app_uart.h"
#include "app_util_platform.h"
#include "sdk_config.h"
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf_sdh.h"
#include "nrf_sdh_soc.h"
#include "nrf_sdh_ble.h"
#include "peer_manager.h"
#include "peer_manager_handler.h"
#include "app_timer.h"
#include "bsp_btn_ble.h"
#include "ble.h"
#include "app_util.h"
#include "ble_advdata.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "ble_db_discovery.h"
#include "ble_hrs.h"
#include "ble_hrs_c.h"
#include "ble_conn_state.h"
#include "fds.h"
#include "nrf_crypto.h"
#include "nrf_ble_gatt.h"
#include "nrf_ble_lesc.h"
#include "nrf_ble_qwr.h"
#include "nrf_pwr_mgmt.h"
#include "nrf_ble_scan.h"

#if defined (UART_PRESENT)
#include "nrf_uart.h"
#endif
#if defined (UARTE_PRESENT)
#include "nrf_uarte.h"
#endif

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"


#define UART_TX_BUF_SIZE                256                                         /**< UART TX buffer size. */
#define UART_RX_BUF_SIZE                256                                         /**< UART RX buffer size. */
#define LEDBUTTON_LED                   BSP_BOARD_LED_2                         /**< LED to be toggled with the help of the LED Button Service. */
static uint16_t   m_conn_handle          = BLE_CONN_HANDLE_INVALID;                 /**< Handle of the current connection. */
static uint16_t   m_conn_handle1          = BLE_CONN_HANDLE_INVALID;                 /**< Handle of the current connection. */
static uint16_t   m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - 3;            /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */

#define LESC_DEBUG_MODE                 0                                               /**< Set to 1 to use the LESC debug keys. The debug mode allows you to use a sniffer to inspect traffic. */
#define LESC_MITM_NC                    1                                               /**< Use MITM (Numeric Comparison). */

/** @brief The maximum number of peripheral and central links combined. */
#define NRF_BLE_LINK_COUNT              (NRF_SDH_BLE_PERIPHERAL_LINK_COUNT + NRF_SDH_BLE_CENTRAL_LINK_COUNT)

#define APP_BLE_CONN_CFG_TAG            1                                               /**< Tag that identifies the SoftDevice BLE configuration. */
#define DEVICE_NAME                     "Reader I"                               /**< Name of device. Will be included in the advertising data. */
#define NUS_SERVICE_UUID_TYPE           BLE_UUID_TYPE_VENDOR_BEGIN                  /**< UUID type for the Nordic UART Service (vendor specific). */
#define LBS_SERVICE_UUID_TYPE           m_lbs.uuid_type
//#define CENTRAL_SCANNING_LED            BSP_BOARD_LED_0
//#define CENTRAL_CONNECTED_LED           BSP_BOARD_LED_1
#define PERIPHERAL_ADVERTISING_LED      BSP_BOARD_LED_0                         /**< Is on when device is advertising. */
#define PERIPHERAL_CONNECTED_LED        BSP_BOARD_LED_1                         /**< Is on when device has connected. */
#define LEDBUTTON_LED                   BSP_BOARD_LED_2                         /**< LED to be toggled with the help of the LED Button Service. */

#define SCAN_DURATION                   0x0000                                          /**< Duration of the scanning in units of 10 milliseconds. If set to 0x0000, scanning continues until it is explicitly disabled. */
#define APP_ADV_INTERVAL                64//300                                          /**< The advertising interval (in units of 0.625 ms. This value corresponds to 40 ms). */
#define APP_ADV_DURATION                18000                                           /**< The advertising duration (180 seconds) in units of 10 milliseconds. */

#define MIN_CONN_INTERVAL               MSEC_TO_UNITS(20, UNIT_1_25_MS)             /**< Minimum acceptable connection interval (20 ms), Connection interval uses 1.25 ms units. */
#define MAX_CONN_INTERVAL               MSEC_TO_UNITS(75, UNIT_1_25_MS)             /**< Maximum acceptable connection interval (75 ms), Connection interval uses 1.25 ms units. */
#define SLAVE_LATENCY                   0                                           /**< Slave latency. */
#define CONN_SUP_TIMEOUT                MSEC_TO_UNITS(4000, UNIT_10_MS)             /**< Connection supervisory timeout (4 seconds), Supervision Timeout uses 10 ms units. */
#define SEC_PARAMS_BOND                 1                                               /**< Perform bonding. */
#if LESC_MITM_NC
#define SEC_PARAMS_MITM                 1                                               /**< Man In The Middle protection required. */
#define SEC_PARAMS_IO_CAPABILITIES      BLE_GAP_IO_CAPS_DISPLAY_YESNO                   /**< Display Yes/No to force Numeric Comparison. */
#else
#define SEC_PARAMS_MITM                 0                                               /**< Man In The Middle protection required. */
#define SEC_PARAMS_IO_CAPABILITIES      BLE_GAP_IO_CAPS_NONE                            /**< No I/O caps. */
#endif
#define SEC_PARAMS_LESC                 1                                               /**< LE Secure Connections pairing required. */
#define SEC_PARAMS_KEYPRESS             0                                               /**< Keypress notifications not required. */
#define SEC_PARAMS_OOB                  0                                               /**< Out Of Band data not available. */
#define SEC_PARAMS_MIN_KEY_SIZE         7                                               /**< Minimum encryption key size in octets. */
#define SEC_PARAMS_MAX_KEY_SIZE         16                                              /**< Maximum encryption key size in octets. */

#define FIRST_CONN_PARAMS_UPDATE_DELAY  APP_TIMER_TICKS(15000)                           /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */
#define NEXT_CONN_PARAMS_UPDATE_DELAY   APP_TIMER_TICKS(30000)                          /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */
#define MAX_CONN_PARAMS_UPDATE_COUNT    3                                               /**< Number of attempts before giving up the connection parameter negotiation. */

/**@brief   Priority of the application BLE event handler.
 * @note    There is no need to modify this value.
 */
#define APP_BLE_OBSERVER_PRIO           3


typedef struct
{
    bool           is_connected;
    ble_gap_addr_t address;
} conn_peer_t;

BLE_NUS_DEF(m_nus, NRF_SDH_BLE_TOTAL_LINK_COUNT); 
BLE_LBS_DEF(m_lbs); 
//BLE_HRS_DEF(m_hrs);                                                         /**< Heart Rate Service instance. */
//BLE_HRS_C_DEF(m_hrs_c);                                                     /**< Structure used to identify the Heart Rate client module. */
NRF_BLE_GATT_DEF(m_gatt);                                                   /**< GATT module instance. */
NRF_BLE_QWRS_DEF(m_qwr, NRF_SDH_BLE_TOTAL_LINK_COUNT);                      /**< Context for the Queued Write module.*/
BLE_ADVERTISING_DEF(m_advertising);                                         /**< Advertising module instance. */
//BLE_DB_DISCOVERY_DEF(m_db_disc);                                            /**< Database discovery module instance. */
NRF_BLE_SCAN_DEF(m_scan);                                                   /**< Scanning Module instance. */

//static uint16_t           m_conn_handle_hrs_c                = BLE_CONN_HANDLE_INVALID;  /**< Connection handle for the HRS central application. */
//static volatile uint16_t  m_conn_handle_num_comp_central     = BLE_CONN_HANDLE_INVALID;  /**< Connection handle for the central that needs a numeric comparison button press. */
static volatile uint16_t  m_conn_handle_num_comp_peripheral  = BLE_CONN_HANDLE_INVALID;  /**< Connection handle for the peripheral that needs a numeric comparison button press. */

static conn_peer_t        m_connected_peers[NRF_BLE_LINK_COUNT];                         /**< Array of connected peers. */

static char * roles_str[] =
{
    "INVALID_ROLE",
    "PERIPHERAL",
    //"CENTRAL",
};

/**@brief Names that the central application scans for, and that are advertised by the peripherals.
 *  If these are set to empty strings, the UUIDs defined below are used.
 */
//static const char m_target_periph_name[] = "";


/**@brief UUIDs that the central application scans for if the name above is set to an empty string,
 * and that are to be advertised by the peripherals.
 */
static ble_uuid_t m_adv_uuids[] = {//{BLE_UUID_HEART_RATE_SERVICE,         BLE_UUID_TYPE_BLE},
                                   //{BLE_UUID_RUNNING_SPEED_AND_CADENCE,  BLE_UUID_TYPE_BLE}
                                   {BLE_UUID_NUS_SERVICE, NUS_SERVICE_UUID_TYPE}
                                   {LBS_UUID_SERVICE, LBS_SERVICE_UUID_TYPE}
                                  };

                                   
/**@brief Function for handling asserts in the SoftDevice
 *
 * @details This function is called in case of an assert in the SoftDevice.
 *
 * @warning This handler is an example only and is not meant for the final product. You need to analyze
 *          how your product is supposed to react in case of assert.
 * @warning On assert from the SoftDevice, the system can only recover on reset.
 *
 * @param[in] line_num     Line number of the failing assert call.
 * @param[in] p_file_name  File name of the failing assert call.
 */
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(0xDEADBEEF, line_num, p_file_name);
}


/**@brief Function for handling an event from the Connection Parameters Module.
 *
 * @details This function will be called for all events in the Connection Parameters Module
 *          which are passed to the application.
 *
 * @note All this function does is to disconnect. This could have been done by simply setting
 *       the disconnect_on_fail config parameter, but instead we use the event handler
 *       mechanism to demonstrate its use.
 *
 * @param[in] p_evt  Event received from the Connection Parameters Module.
 */
static void on_conn_params_evt(ble_conn_params_evt_t * p_evt)
{
    uint32_t err_code;

    if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED)
    {
        err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
        APP_ERROR_CHECK(err_code);
    }
}


/**@brief Function for handling errors from the Connection Parameters module.
 *
 * @param[in] nrf_error  Error code that contains information about what went wrong.
 */
static void conn_params_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}


/**@brief Function for handling Scanning Module events.

static void scan_evt_handler(scan_evt_t const * p_scan_evt)
{
    ret_code_t err_code;

    switch(p_scan_evt->scan_evt_id)
    {
        case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
        {
            err_code = p_scan_evt->params.connecting_err.err_code;
            APP_ERROR_CHECK(err_code);
        } break;

        default:
            break;
    }
}


/**@brief Function for initializing the scanning and setting the filters.

static void scan_init(void)
{
    ret_code_t          err_code;
    ble_uuid_t          target_uuid = 
    {
        .uuid = BLE_UUID_HEART_RATE_SERVICE,
        .type = BLE_UUID_TYPE_BLE
    };
    nrf_ble_scan_init_t init_scan;

    memset(&init_scan, 0, sizeof(init_scan));

    init_scan.connect_if_match = true;
    init_scan.conn_cfg_tag     = APP_BLE_CONN_CFG_TAG;

    err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);
    APP_ERROR_CHECK(err_code);

    if (strlen(m_target_periph_name) != 0)
    {
        err_code = nrf_ble_scan_filter_set(&m_scan, 
                                           SCAN_NAME_FILTER, 
                                           m_target_periph_name);
        APP_ERROR_CHECK(err_code);
    }

    err_code = nrf_ble_scan_filter_set(&m_scan, 
                                       SCAN_UUID_FILTER, 
                                       &target_uuid);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_scan_filters_enable(&m_scan, 
                                           NRF_BLE_SCAN_NAME_FILTER | NRF_BLE_SCAN_UUID_FILTER, 
                                           false);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the scanning.

static void scan_start(void)
{
    ret_code_t err_code;

    err_code = nrf_ble_scan_start(&m_scan);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_INFO("Scanning");
}


/**@brief Function for initializing the advertising and the scanning.
 */
static void adv_scan_start(void)
{
    ret_code_t err_code;

    //scan_start();

    // Turn on the LED to signal scanning.
   // bsp_board_led_on(CENTRAL_SCANNING_LED);

    // Start advertising.
    err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_INFO("Advertising");
}


/**@brief Function for handling Peer Manager events.
 *
 * @param[in] p_evt  Peer Manager event.
 */
static void pm_evt_handler(pm_evt_t const * p_evt)
{
    pm_handler_on_pm_evt(p_evt);
    pm_handler_disconnect_on_sec_failure(p_evt);
    pm_handler_flash_clean(p_evt);

    switch (p_evt->evt_id)
    {
        case PM_EVT_PEERS_DELETE_SUCCEEDED:
            adv_scan_start();
            break;

        default:
            break;
    }
}


/**@brief Function for changing filter settings after establishing the connection.
 
static void filter_settings_change(void)
{
    ret_code_t err_code;

    err_code = nrf_ble_scan_all_filter_remove(&m_scan);
    APP_ERROR_CHECK(err_code);

    if (strlen(m_target_periph_name) != 0)
    {
        err_code = nrf_ble_scan_filter_set(&m_scan, 
                                           SCAN_NAME_FILTER, 
                                           m_target_periph_name);
        APP_ERROR_CHECK(err_code);
    }
}


/**@brief Handles events coming from the Heart Rate central module.

static void hrs_c_evt_handler(ble_hrs_c_t * p_hrs_c, ble_hrs_c_evt_t * p_hrs_c_evt)
{
    switch (p_hrs_c_evt->evt_type)
    {
        case BLE_HRS_C_EVT_DISCOVERY_COMPLETE:
        {
            if (m_conn_handle_hrs_c == BLE_CONN_HANDLE_INVALID)
            {
                ret_code_t err_code;

                m_conn_handle_hrs_c = p_hrs_c_evt->conn_handle;

                // We do not want to connect to two peripherals offering the same service, so when
                // a UUID is matched, we check whether we are not already connected to a peer which
                // offers the same service
                filter_settings_change();

                NRF_LOG_INFO("CENTRAL: HRS discovered on conn_handle 0x%x",
                             m_conn_handle_hrs_c);

                err_code = ble_hrs_c_handles_assign(p_hrs_c,
                                                    m_conn_handle_hrs_c,
                                                    &p_hrs_c_evt->params.peer_db);
                APP_ERROR_CHECK(err_code);

                // Heart rate service discovered. Enable notification of Heart Rate Measurement.
                err_code = ble_hrs_c_hrm_notif_enable(p_hrs_c);
                APP_ERROR_CHECK(err_code);
            }
        } break; // BLE_HRS_C_EVT_DISCOVERY_COMPLETE

        case BLE_HRS_C_EVT_HRM_NOTIFICATION:
        {
            NRF_LOG_INFO("CENTRAL: Heart Rate = %d", p_hrs_c_evt->params.hrm.hr_value);
        } break;

        default:
            // No implementation needed.
            break;
    }
}


/**@brief Function for checking whether a link already exists with a newly connected peer.
 *
 * @details This function checks whether the newly connected device is already connected.
 *
 * @param[in]   p_connected_evt Bluetooth connected event.
 * @return                      True if the peer's address is found in the list of connected peers,
 *                              false otherwise.
 */
static bool is_already_connected(ble_gap_addr_t const * p_connected_adr)
{
    for (uint32_t i = 0; i < NRF_BLE_LINK_COUNT; i++)
    {
        if (m_connected_peers[i].is_connected)
        {
            if (m_connected_peers[i].address.addr_type == p_connected_adr->addr_type)
            {
                if (memcmp(m_connected_peers[i].address.addr,
                           p_connected_adr->addr,
                           sizeof(m_connected_peers[i].address.addr)) == 0)
                {
                    return true;
                }
            }
        }
    }
    return false;
}


/** @brief Function for handling a numeric comparison match request. */
static void on_match_request(uint16_t conn_handle, uint8_t role)
{
    // Mark the appropriate conn_handle as pending. The rest is handled on button press.
    NRF_LOG_INFO("Press Button 1 to confirm, Button 2 to reject");
    if (role == BLE_GAP_ROLE_CENTRAL)
    {
        //m_conn_handle_num_comp_central = conn_handle;
    }
    else if (role == BLE_GAP_ROLE_PERIPH)
    {
        m_conn_handle_num_comp_peripheral = conn_handle;
    }
}





/**@brief Function for assigning new connection handle to the available instance of QWR module.
 *
 * @param[in] conn_handle New connection handle.
 */
static void multi_qwr_conn_handle_assign(uint16_t conn_handle)
{
    for (uint32_t i = 0; i < NRF_BLE_LINK_COUNT; i++)
    {
        if (m_qwr[i].conn_handle == BLE_CONN_HANDLE_INVALID)
        {
            ret_code_t err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr[i], conn_handle);
            APP_ERROR_CHECK(err_code);
            break;
        }
    }
}


/**@brief Function for handling BLE Stack events that are common to both the central and peripheral roles.
 * @param[in] conn_handle Connection Handle.
 * @param[in] p_ble_evt  Bluetooth stack event.
 */
static void on_ble_evt(uint16_t conn_handle, ble_evt_t const * p_ble_evt)
{
    char        passkey[BLE_GAP_PASSKEY_LEN + 1];
    uint16_t    role = ble_conn_state_role(conn_handle);
    
    pm_handler_secure_on_connection(p_ble_evt);

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            m_connected_peers[conn_handle].is_connected = true;
            m_connected_peers[conn_handle].address = p_ble_evt->evt.gap_evt.params.connected.peer_addr;
            multi_qwr_conn_handle_assign(conn_handle);
            m_conn_handle1 = p_ble_evt->evt.gap_evt.conn_handle;
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            memset(&m_connected_peers[conn_handle], 0x00, sizeof(m_connected_peers[0]));
            m_conn_handle1 = BLE_CONN_HANDLE_INVALID;
            break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            NRF_LOG_INFO("%s: BLE_GAP_EVT_SEC_PARAMS_REQUEST", nrf_log_push(roles_str[role]));
            break;

        case BLE_GAP_EVT_PASSKEY_DISPLAY:
            memcpy(passkey, p_ble_evt->evt.gap_evt.params.passkey_display.passkey, BLE_GAP_PASSKEY_LEN);
            passkey[BLE_GAP_PASSKEY_LEN] = 0x00;
            NRF_LOG_INFO("%s: BLE_GAP_EVT_PASSKEY_DISPLAY: passkey=%s match_req=%d",
                         nrf_log_push(roles_str[role]),
                         nrf_log_push(passkey),
                         p_ble_evt->evt.gap_evt.params.passkey_display.match_request);

            if (p_ble_evt->evt.gap_evt.params.passkey_display.match_request)
            {
                on_match_request(conn_handle, role);
            }
            break;

        case BLE_GAP_EVT_AUTH_KEY_REQUEST:
            NRF_LOG_INFO("%s: BLE_GAP_EVT_AUTH_KEY_REQUEST", nrf_log_push(roles_str[role]));
            break;

        case BLE_GAP_EVT_LESC_DHKEY_REQUEST:
            NRF_LOG_INFO("%s: BLE_GAP_EVT_LESC_DHKEY_REQUEST", nrf_log_push(roles_str[role]));
            break;

         case BLE_GAP_EVT_AUTH_STATUS:
             NRF_LOG_INFO("%s: BLE_GAP_EVT_AUTH_STATUS: status=0x%x bond=0x%x lv4: %d kdist_own:0x%x kdist_peer:0x%x",
                          nrf_log_push(roles_str[role]),
                          p_ble_evt->evt.gap_evt.params.auth_status.auth_status,
                          p_ble_evt->evt.gap_evt.params.auth_status.bonded,
                          p_ble_evt->evt.gap_evt.params.auth_status.sm1_levels.lv4,
                          *((uint8_t *)&p_ble_evt->evt.gap_evt.params.auth_status.kdist_own),
                          *((uint8_t *)&p_ble_evt->evt.gap_evt.params.auth_status.kdist_peer));
            break;

        default:
            // No implementation needed.
            break;
    }
}


/**@brief Function for handling BLE Stack events that are related to central application.
 *
 * @details This function keeps the connection handles of central application up-to-date. It
 * parses scanning reports, initiates a connection attempt to peripherals when a target UUID
 * is found, and manages connection parameter update requests. Additionally, it updates the status
 * of LEDs used to report the central application's activity.
 *
 * @note        Since this function updates connection handles, @ref BLE_GAP_EVT_DISCONNECTED events
 *              must be dispatched to the target application before invoking this function.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 
static void on_ble_central_evt(ble_evt_t const * p_ble_evt)
{
    ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;
    ret_code_t            err_code;

    switch (p_ble_evt->header.evt_id)
    {
        // Upon connection, check which peripheral is connected (HR or RSC), initiate DB
        //  discovery, update LEDs status, and resume scanning, if necessary.
        case BLE_GAP_EVT_CONNECTED:
        {
            NRF_LOG_INFO("CENTRAL: Connected, handle: %d.", p_gap_evt->conn_handle);
            // If no Heart Rate Sensor is currently connected, try to find them on this peripheral.
            if (m_conn_handle_hrs_c == BLE_CONN_HANDLE_INVALID)
            {
                NRF_LOG_INFO("CENTRAL: Searching for HRS on conn_handle 0x%x", p_gap_evt->conn_handle);

                err_code = ble_db_discovery_start(&m_db_disc, p_gap_evt->conn_handle);
                APP_ERROR_CHECK(err_code);
            }
            // Update status of LEDs.
            bsp_board_led_off(CENTRAL_SCANNING_LED);
            bsp_board_led_on(CENTRAL_CONNECTED_LED);
        } break; // BLE_GAP_EVT_CONNECTED

        // Upon disconnection, reset the connection handle of the peer that disconnected, update
        // the status of LEDs, and start scanning again.
        case BLE_GAP_EVT_DISCONNECTED:
        {
            NRF_LOG_INFO("CENTRAL: Disconnected, handle: %d, reason: 0x%x",
                         p_gap_evt->conn_handle,
                       p_gap_evt->params.disconnected.reason);

            // Update the status of LEDs.
            bsp_board_led_off(CENTRAL_CONNECTED_LED);
            bsp_board_led_on(CENTRAL_SCANNING_LED);

            if (p_gap_evt->conn_handle == m_conn_handle_hrs_c)
            {
                ble_uuid_t target_uuid = {.uuid = BLE_UUID_HEART_RATE_SERVICE, .type = BLE_UUID_TYPE_BLE};
                m_conn_handle_hrs_c    = BLE_CONN_HANDLE_INVALID;

                err_code = nrf_ble_scan_filter_set(&m_scan, 
                                                   SCAN_UUID_FILTER, 
                                                   &target_uuid);
                APP_ERROR_CHECK(err_code);
            }
            
            scan_start();
        } break; // BLE_GAP_EVT_DISCONNECTED

        case BLE_GAP_EVT_TIMEOUT:
        {
            // Timeout for scanning is not specified, so only connection attemps can time out.
            if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
            {
                NRF_LOG_DEBUG("CENTRAL: Connection Request timed out.");
            }
        } break;

        case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
        {
            // Accept parameters requested by peer.
            err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
                                        &p_gap_evt->params.conn_param_update_request.conn_params);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            NRF_LOG_DEBUG("CENTRAL: GATT Client Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            NRF_LOG_DEBUG("CENTRAL: GATT Server Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}


/**@brief Function for handling BLE Stack events that involves peripheral applications. Manages the
 * LEDs used to report the status of the peripheral applications.
 *
 * @param[in] p_ble_evt  Bluetooth stack event.
 */
static void on_ble_peripheral_evt(ble_evt_t const * p_ble_evt)
{
    ret_code_t err_code;
    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("PERIPHERAL: Connected, handle %d.", p_ble_evt->evt.gap_evt.conn_handle);
            bsp_board_led_off(PERIPHERAL_ADVERTISING_LED);
            bsp_board_led_on(PERIPHERAL_CONNECTED_LED);
            err_code = app_button_enable();
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            NRF_LOG_INFO("PERIPHERAL: Disconnected, handle %d, reason 0x%x.",
                         p_ble_evt->evt.gap_evt.conn_handle,
                         p_ble_evt->evt.gap_evt.params.disconnected.reason);
            err_code = app_button_disable();
            APP_ERROR_CHECK(err_code);
            // LED indication will be changed when advertising starts.
        break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            ret_code_t err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;
        
        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            NRF_LOG_DEBUG("PERIPHERAL: GATT Client Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            NRF_LOG_DEBUG("PERIPHERAL: GATT Server Timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}


/**@brief Function for handling advertising events.
 *
 * @param[in] ble_adv_evt  Advertising event.
 */
static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
{
    switch (ble_adv_evt)
    {
        case BLE_ADV_EVT_FAST:
            bsp_board_led_on(PERIPHERAL_ADVERTISING_LED);
            bsp_board_led_off(PERIPHERAL_CONNECTED_LED);
            break;

        case BLE_ADV_EVT_IDLE:
        {
            ret_code_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST);
            APP_ERROR_CHECK(err_code);
        } break;

        default:
            // No implementation needed.
            break;
    }
}

/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.

static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    uint32_t err_code;

    switch (p_ble_evt->header.evt_id)
    {
        case BLE_GAP_EVT_CONNECTED:
            NRF_LOG_INFO("Connected");
            err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
            APP_ERROR_CHECK(err_code);
            m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
            err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GAP_EVT_DISCONNECTED:
            NRF_LOG_INFO("Disconnected");
            // LED indication will be changed when advertising starts.
            m_conn_handle = BLE_CONN_HANDLE_INVALID;
            break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
            // Pairing not supported
            err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_SYS_ATTR_MISSING:
            // No system attributes have been stored.
            err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTC_EVT_TIMEOUT:
            // Disconnect on GATT Client timeout event.
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        case BLE_GATTS_EVT_TIMEOUT:
            // Disconnect on GATT Server timeout event.
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            // No implementation needed.
            break;
    }
}

/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.
*/ 
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    uint16_t conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
    uint16_t role        = ble_conn_state_role(conn_handle);

    if (    (p_ble_evt->header.evt_id == BLE_GAP_EVT_CONNECTED)
        &&  (is_already_connected(&p_ble_evt->evt.gap_evt.params.connected.peer_addr)))
    {
        NRF_LOG_INFO("%s: Already connected to this device as %s (handle: %d), disconnecting.",
                     (role == BLE_GAP_ROLE_PERIPH) ? "PERIPHERAL" : "CENTRAL",
                     (role == BLE_GAP_ROLE_PERIPH) ? "CENTRAL"    : "PERIPHERAL",
                     conn_handle);

        (void)sd_ble_gap_disconnect(conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);

        // Do not process the event further.
        return;
    }

    on_ble_evt(conn_handle, p_ble_evt);

    if (role == BLE_GAP_ROLE_PERIPH)
    {
        // Manages peripheral LEDs.
        on_ble_peripheral_evt(p_ble_evt);
    }
/*    else if ((role == BLE_GAP_ROLE_CENTRAL) || (p_ble_evt->header.evt_id == BLE_GAP_EVT_ADV_REPORT))
    {
        on_ble_central_evt(p_ble_evt);
    }
*/
}


/**@brief Function for initializing the Heart Rate Service client.
static void hrs_c_init(void)
{
    ret_code_t       err_code;
    ble_hrs_c_init_t hrs_c_init_obj;

    hrs_c_init_obj.evt_handler = hrs_c_evt_handler;

    err_code = ble_hrs_c_init(&m_hrs_c, &hrs_c_init_obj);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupts.
 */
static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

     // Configure the BLE stack by using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register a handler for BLE events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}


/**@brief Function for initializing the Peer Manager. */
static void peer_manager_init(void)
{
    ble_gap_sec_params_t sec_params;
    ret_code_t err_code;

    err_code = pm_init();
    APP_ERROR_CHECK(err_code);

    memset(&sec_params, 0, sizeof(ble_gap_sec_params_t));

    // Security parameters to be used for all security procedures.
    sec_params.bond           = SEC_PARAMS_BOND;
    sec_params.mitm           = SEC_PARAMS_MITM;
    sec_params.lesc           = SEC_PARAMS_LESC;
    sec_params.keypress       = SEC_PARAMS_KEYPRESS;
    sec_params.io_caps        = SEC_PARAMS_IO_CAPABILITIES;
    sec_params.oob            = SEC_PARAMS_OOB;
    sec_params.min_key_size   = SEC_PARAMS_MIN_KEY_SIZE;
    sec_params.max_key_size   = SEC_PARAMS_MAX_KEY_SIZE;
    sec_params.kdist_own.enc  = 1;
    sec_params.kdist_own.id   = 1;
    sec_params.kdist_peer.enc = 1;
    sec_params.kdist_peer.id  = 1;

    err_code = pm_sec_params_set(&sec_params);
    APP_ERROR_CHECK(err_code);

    err_code = pm_register(pm_evt_handler);
    APP_ERROR_CHECK(err_code);
}


/** @brief Delete all data stored for all peers. */
static void delete_bonds(void)
{
    ret_code_t err_code;

    NRF_LOG_INFO("Erase bonds!");

    err_code = pm_peers_delete();
    APP_ERROR_CHECK(err_code);
}


/** @brief Function for accepting or rejecting a numeric comparison. */
static void num_comp_reply(uint16_t conn_handle, bool accept)
{
    uint8_t    key_type;
    ret_code_t err_code;

    if (accept)
    {
        NRF_LOG_INFO("Numeric Match. Conn handle: %d", conn_handle);
        key_type = BLE_GAP_AUTH_KEY_TYPE_PASSKEY;
    }
    else
    {
        NRF_LOG_INFO("Numeric REJECT. Conn handle: %d", conn_handle);
        key_type = BLE_GAP_AUTH_KEY_TYPE_NONE;
    }

    err_code = sd_ble_gap_auth_key_reply(conn_handle,
                                         key_type,
                                         NULL);
    APP_ERROR_CHECK(err_code);
}


/** @brief Function for handling button presses for numeric comparison match requests. */
static void on_num_comp_button_press(bool accept)
{
    // Check whether any links have pending match requests, and if so, send a reply.
    /*if (m_conn_handle_num_comp_central != BLE_CONN_HANDLE_INVALID)
    {
        num_comp_reply(m_conn_handle_num_comp_central, accept);
        m_conn_handle_num_comp_central = BLE_CONN_HANDLE_INVALID;
    }
    else*/ if (m_conn_handle_num_comp_peripheral != BLE_CONN_HANDLE_INVALID)
    {
        num_comp_reply(m_conn_handle_num_comp_peripheral, accept);
        m_conn_handle_num_comp_peripheral = BLE_CONN_HANDLE_INVALID;
    }
}


/**@brief Function for handling events from the BSP module.
 *
 * @param[in]   event   Event generated by button press.
 */
static void bsp_event_handler(bsp_event_t event)
{
    ret_code_t err_code;
    switch (event)
    {
        case BSP_EVENT_KEY_0:
            /*err_code = ble_hrs_heart_rate_measurement_send(&m_hrs, 87);
            if ((err_code != NRF_SUCCESS) &&
                (err_code != NRF_ERROR_INVALID_STATE) &&
                (err_code != NRF_ERROR_RESOURCES) &&
                (err_code != NRF_ERROR_BUSY) &&
                (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
                )
            {
                APP_ERROR_HANDLER(err_code);
            }*/

            on_num_comp_button_press(true);
            break;

      case BSP_EVENT_KEY_1:
            on_num_comp_button_press(false);
            break;

      case BSP_EVENT_DISCONNECT:
            err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            if (err_code != NRF_ERROR_INVALID_STATE)
            {
                APP_ERROR_CHECK(err_code);
            }
            break;

      case BSP_EVENT_WHITELIST_OFF:
            if (m_conn_handle == BLE_CONN_HANDLE_INVALID)
            {
                err_code = ble_advertising_restart_without_whitelist(&m_advertising);
                if (err_code != NRF_ERROR_INVALID_STATE)
                {
                    APP_ERROR_CHECK(err_code);
                }
            }
            break;
        default:
            break;
    }
}


/**@brief Function for initializing buttons and LEDs.
 *
 * @param[out] p_erase_bonds  True if the clear bonding button is pressed to
 *                            wake the application up. False otherwise.
 */
static void buttons_leds_init(bool * p_erase_bonds)
{
    ret_code_t err_code;
    bsp_event_t startup_event;

    bsp_board_init(BSP_INIT_LEDS);
    err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler);
    APP_ERROR_CHECK(err_code);

    err_code = bsp_btn_ble_init(NULL, &startup_event);
    APP_ERROR_CHECK(err_code);

    *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);
}


/**@brief Function for initializing the GAP.
 *
 * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
 *          device, including the device name, appearance, and the preferred connection parameters.
 */
static void gap_params_init(void)
{
    ret_code_t              err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    //gap_conn_params = m_scan.conn_params;

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}

/**@brief Function for handling events from the GATT library. */
void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
    if ((m_conn_handle == p_evt->conn_handle) && (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED))
    {
        m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
        NRF_LOG_INFO("Data len is set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
    }
    NRF_LOG_DEBUG("ATT MTU exchange completed. central 0x%x peripheral 0x%x",
                  p_gatt->att_mtu_desired_central,
                  p_gatt->att_mtu_desired_periph);
}


/**@brief Function for initializing the GATT library. */
void gatt_init(void)
{
    ret_code_t err_code;

    err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_gatt_att_mtu_periph_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling Queued Write Module errors.
 *
 * @details A pointer to this function is passed to each service that may need to inform the
 *          application about an error.
 *
 * @param[in]   nrf_error   Error code containing information about what went wrong.
 */
static void nrf_qwr_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}


/**@brief Function for initializing the Queued Write instances.
 */
static void qwr_init(void)
{
    ret_code_t         err_code;
    nrf_ble_qwr_init_t qwr_init_obj = {0};

    qwr_init_obj.error_handler = nrf_qwr_error_handler;

    for (uint32_t i = 0; i < NRF_BLE_LINK_COUNT; i++)
    {
        err_code = nrf_ble_qwr_init(&m_qwr[i], &qwr_init_obj);
        APP_ERROR_CHECK(err_code);
    }
}


/**@brief Function for initializing the Connection Parameters module. */
static void conn_params_init(void)
{
    ret_code_t             err_code;
    ble_conn_params_init_t cp_init;

    memset(&cp_init, 0, sizeof(cp_init));

    cp_init.p_conn_params                  = NULL;
    cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
    cp_init.next_conn_params_update_delay  = NEXT_CONN_PARAMS_UPDATE_DELAY;
    cp_init.max_conn_params_update_count   = MAX_CONN_PARAMS_UPDATE_COUNT;
    cp_init.start_on_notify_cccd_handle    = BLE_GATT_HANDLE_INVALID; // Start upon connection.
    cp_init.disconnect_on_fail             = false;//true
    cp_init.evt_handler                    = on_conn_params_evt;//NULL;  // Ignore events.
    cp_init.error_handler                  = conn_params_error_handler;

    err_code = ble_conn_params_init(&cp_init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling database discovery events.
 *
 * @details This function is a callback function to handle events from the database discovery module.
 *          Depending on the UUIDs that are discovered, this function forwards the events
 *          to their respective services.
 *
 * @param[in] p_event  Pointer to the database discovery event.

static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
    ble_hrs_on_db_disc_evt(&m_hrs_c, p_evt);
}


/**@brief Function for initializing the database discovery module. 
static void db_discovery_init(void)
{
    ret_code_t err_code = ble_db_discovery_init(db_disc_handler);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the Heart Rate service. 
static void hrs_init(void)
{
    ret_code_t     err_code;
    ble_hrs_init_t hrs_init_params;
    uint8_t        body_sensor_location;

    // Initialize the Heart Rate Service.
    body_sensor_location = BLE_HRS_BODY_SENSOR_LOCATION_FINGER;

    memset(&hrs_init_params, 0, sizeof(hrs_init_params));

    hrs_init_params.evt_handler                 = NULL;
    hrs_init_params.is_sensor_contact_supported = true;
    hrs_init_params.p_body_sensor_location      = &body_sensor_location;

    // Require LESC with MITM (Numeric Comparison).
    hrs_init_params.hrm_cccd_wr_sec = SEC_MITM;
    hrs_init_params.bsl_rd_sec      = SEC_MITM;

    err_code = ble_hrs_init(&m_hrs, &hrs_init_params);
    APP_ERROR_CHECK(err_code);
}

/**@snippet [Handling the data received over BLE] */

/**@brief Function for handling the data from the Nordic UART Service.
 *
 * @details This function will process the data received from the Nordic UART BLE Service and send
 *          it to the UART module.
 *
 * @param[in] p_evt       Nordic UART Service event.
 */
/**@snippet [Handling the data received over BLE] */


static void nus_data_handler(ble_nus_evt_t * p_evt)
{   
    if (p_evt->type == BLE_NUS_EVT_RX_DATA)
    {
        uint32_t err_code, err_code1, err_code2  ;
        static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
        static uint8_t index = 0;
        uint8_t d[]="Get Door Details";
        uint8_t string[] = "Door Details"; //\nTimings: 10 AM to 1 PM\nDoors Allowed: 1,3,5\n";
        uint16_t length = sizeof(string);
        uint8_t string1[] = "Invalid Input";
        uint16_t length1 = sizeof(string1);

        NRF_LOG_DEBUG("Received data from BLE NUS. Writing data on UART.");
        NRF_LOG_HEXDUMP_DEBUG(p_evt->params.rx_data.p_data, p_evt->params.rx_data.length);
        NRF_LOG_INFO("Data sent from phone to nRF52840 DK is -->%s<--",p_evt->params.rx_data.p_data);
        for (uint32_t i = 0; i < p_evt->params.rx_data.length; i++)
        {
            do
            {
                //if (p_evt->params.rx_data.p_data[i]==d[i])
                //{
                   err_code = app_uart_put(p_evt->params.rx_data.p_data[i]);
                   if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_BUSY))
                     {
                        NRF_LOG_ERROR("Failed receiving NUS message. Error 0x%x. ", err_code);
                        APP_ERROR_CHECK(err_code);
                     }
                //}

            } while (err_code == NRF_ERROR_BUSY);
        }
        
        if (p_evt->params.rx_data.p_data[p_evt->params.rx_data.length - 1] == '\r')
        {
            while (app_uart_put('\n') == NRF_ERROR_BUSY);
        }

        if(strcmp(p_evt->params.rx_data.p_data,d)==0)
        {
             NRF_LOG_DEBUG("Ready to send data over BLE NUS");
             NRF_LOG_INFO("Data sent from nRF52840 DK to phone is --><--%s", string);
             do
             {
                err_code1 = ble_nus_data_send(&m_nus, string, &length, m_conn_handle1);
                NRF_LOG_INFO("Data Recieved with err_code %d", err_code1);
                if ((err_code1 != NRF_ERROR_INVALID_STATE) &&
                   (err_code1 != NRF_ERROR_RESOURCES) &&
                   (err_code1 != NRF_ERROR_NOT_FOUND))
                        {
                            APP_ERROR_CHECK(err_code1);
                        }
             } while (err_code1 == NRF_ERROR_RESOURCES);

             for (uint32_t i = 0; i < length; i++)
               {
                 do
                  {
                          err_code1 = app_uart_put(string[i]);
                          if ((err_code1 != NRF_SUCCESS) && (err_code1 != NRF_ERROR_BUSY))
                             {
                                NRF_LOG_ERROR("Failed receiving NUS message. Error 0x%x. ", err_code1);
                                 APP_ERROR_CHECK(err_code1);
                             }

                  } while (err_code1 == NRF_ERROR_BUSY);
               }
        }
        else
        {
          NRF_LOG_DEBUG("Ready to send data over BLE NUS");
          NRF_LOG_INFO("Data sent from nRF52840 DK to phone is -->%s<--", string1);
          do
             {
                err_code = ble_nus_data_send(&m_nus, string1, &length1, m_conn_handle1);
                NRF_LOG_INFO("Data Recieved with err_code %d", err_code);
                if ((err_code != NRF_ERROR_INVALID_STATE) &&
                   (err_code != NRF_ERROR_RESOURCES) &&
                   (err_code != NRF_ERROR_NOT_FOUND))
                        {
                            APP_ERROR_CHECK(err_code);
                        }
             } while (err_code == NRF_ERROR_RESOURCES);
             for (uint32_t i = 0; i < length1; i++)
               {
                 do
                  {
                          err_code = app_uart_put(string1[i]);
                          if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_BUSY))
                             {
                                NRF_LOG_ERROR("Failed receiving NUS message. Error 0x%x. ", err_code);
                                 APP_ERROR_CHECK(err_code);
                             }

                  } while (err_code == NRF_ERROR_BUSY);
               }
        }

      }  
}


/**@brief Function for handling write events to the LED characteristic.
 *
 * @param[in] p_lbs     Instance of LED Button Service to which the write applies.
 * @param[in] led_state Written/desired state of the LED.
 */
static void led_write_handler(uint16_t conn_handle, ble_lbs_t * p_lbs, uint8_t led_state)
{
    if (led_state)
    {
        bsp_board_led_on(LEDBUTTON_LED);
        NRF_LOG_INFO("Received LED ON!");
    }
    else
    {
        bsp_board_led_off(LEDBUTTON_LED);
        NRF_LOG_INFO("Received LED OFF!");
    }
}


/**@snippet [Handling the data received over BLE] */


/**@brief Function for initializing services that will be used by the application.
 */
static void services_init(void)
{
    uint32_t err_code;
    ble_nus_init_t     nus_init;
    ble_lbs_init_t     init     = {0};
    
    // Initialize NUS.
    memset(&nus_init, 0, sizeof(nus_init));

    nus_init.data_handler = nus_data_handler;

    err_code = ble_nus_init(&m_nus, &nus_init);
    APP_ERROR_CHECK(err_code);

    //Initialize LBS.
    init.led_write_handler = led_write_handler;

    err_code = ble_lbs_init(&m_lbs, &init);
    //NRF_LOG_INFO("err_code is %d", err_code);
    //NRF_LOG_FLUSH();
    APP_ERROR_CHECK(err_code);
}


/**@brief   Function for handling app_uart events.
 *
 * @details This function will receive a single character from the app_uart module and append it to
 *          a string. The string will be be sent over BLE when the last character received was a
 *          'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length.
 */
/**@snippet [Handling the data received over UART] */
void uart_event_handle(app_uart_evt_t * p_event)
{
    static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
    static uint8_t index = 0;
    uint32_t       err_code;

    switch (p_event->evt_type)
    {
        case APP_UART_DATA_READY:
            UNUSED_VARIABLE(app_uart_get(&data_array[index]));
            index++;
           
            if ((data_array[index - 1] == '\n') ||
                (data_array[index - 1] == '\r') ||
                (index >= m_ble_nus_max_data_len))
            {
                if (index > 1)
                {
                    NRF_LOG_INFO("Data sent from nRF52840 DK to phone is -->%s<--", data_array );
                    NRF_LOG_DEBUG("Ready to send data over BLE NUS");
                    NRF_LOG_HEXDUMP_DEBUG(data_array, index);
                    do
                    {
                        uint16_t length = (uint16_t)index;
                        err_code = ble_nus_data_send(&m_nus, data_array, &length, m_conn_handle1);
                        NRF_LOG_INFO("Data Recieved with err_code %d", err_code);
                        if ((err_code != NRF_ERROR_INVALID_STATE) &&
                            (err_code != NRF_ERROR_RESOURCES) &&
                            (err_code != NRF_ERROR_NOT_FOUND))
                        {
                            APP_ERROR_CHECK(err_code);
                        }
                        
                    } while (err_code == NRF_ERROR_RESOURCES);
                }

                index = 0;
            }
            break;

        case APP_UART_COMMUNICATION_ERROR:
            APP_ERROR_HANDLER(p_event->data.error_communication);
            break;

        case APP_UART_FIFO_ERROR:
            APP_ERROR_HANDLER(p_event->data.error_code);
            break;

        default:
            break;
    }
}
/**@snippet [Handling the data received over UART] */


/**@brief  Function for initializing the UART module.
 */
/**@snippet [UART Initialization] */
static void uart_init(void)
{
    uint32_t                     err_code;
    app_uart_comm_params_t const comm_params =
    {
        .rx_pin_no    = RX_PIN_NUMBER,
        .tx_pin_no    = TX_PIN_NUMBER,
        .rts_pin_no   = RTS_PIN_NUMBER,
        .cts_pin_no   = CTS_PIN_NUMBER,
        .flow_control = APP_UART_FLOW_CONTROL_DISABLED,
        .use_parity   = false,
#if defined (UART_PRESENT)
        .baud_rate    = NRF_UART_BAUDRATE_115200
#else
        .baud_rate    = NRF_UARTE_BAUDRATE_115200
#endif
    };

    APP_UART_FIFO_INIT(&comm_params,
                       UART_RX_BUF_SIZE,
                       UART_TX_BUF_SIZE,
                       uart_event_handle,
                       APP_IRQ_PRIORITY_LOWEST,
                       err_code);
    APP_ERROR_CHECK(err_code);
}
/**@snippet [UART Initialization] */


/**@brief Function for initializing the advertising functionality. */
static void advertising_init(void)
{
    ret_code_t             err_code;
    ble_advertising_init_t init;

    //ble_uuid_t adv_uuids[] = {{LBS_UUID_SERVICE, m_lbs.uuid_type}};
    
    memset(&init, 0, sizeof(init));

    init.advdata.name_type               = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance      = true;// true
    init.advdata.flags                   = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;
    init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
    init.advdata.uuids_complete.p_uuids  = m_adv_uuids;
    init.config.ble_adv_fast_enabled  = true;
    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout  = APP_ADV_DURATION;

    init.evt_handler = on_adv_evt;

    err_code = ble_advertising_init(&m_advertising, &init);
    NRF_LOG_INFO("err_code is %d", err_code);
    NRF_LOG_FLUSH();
    APP_ERROR_CHECK(err_code);

    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
}


/**@brief Function for initializing logging. */
static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}


/**@brief Function for initializing the timer. */
static void timer_init(void)
{
    ret_code_t err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing power management.
 */
static void power_management_init(void)
{
    ret_code_t err_code;
    err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling the idle state (main loop).
 *
 * @details Handles any pending log or key operations, or both, then sleeps until the next event occurs.
 */
static void idle_state_handle(void)
{
    ret_code_t err_code;
    
    err_code = nrf_ble_lesc_request_handler();
    APP_ERROR_CHECK(err_code);
    
    if (NRF_LOG_PROCESS() == false)
    {
        nrf_pwr_mgmt_run();
    }
}



int main(void)
{
    bool erase_bonds;

    // Initialize.
    uart_init();
    log_init();
    timer_init();
    buttons_leds_init(&erase_bonds);
    power_management_init();
    ble_stack_init();
    //scan_init();
    gap_params_init();
    gatt_init();
    services_init();
    advertising_init();
    conn_params_init();
    //db_discovery_init();
    qwr_init();//
    //hrs_init();
    //hrs_c_init();
    peer_manager_init();//
    //send_some_data_uart_init();

    // Start execution.
    NRF_LOG_INFO("LE Secure Connections example started.");

    if (erase_bonds == true)
    {
        delete_bonds();
        // Scanning and advertising is started by PM_EVT_PEERS_DELETE_SUCEEDED.
    }
    else
    {
        adv_scan_start();
    }

    // Enter main loop.
    for (;;)
    {
        idle_state_handle();
    }
}

RE: Adding Blinky features in my Example

Fred — Mon, 22 Apr 2019 17:39:04 GMT

You initialize the static structure array at compile time. This can only be done using constants, which m_lbs.uuid_type is not.

RE: Adding Blinky features in my Example

Anubhav — Mon, 22 Apr 2019 11:21:43 GMT

Hi, I have a small doubt in my code.

I have added the LBS service function from the blinky example to my code along with the turning OFF and ON of the led function.

static void led_write_handler(uint16_t conn_handle, ble_lbs_t * p_lbs, uint8_t led_state)
{
    if (led_state)
    {
        bsp_board_led_on(LEDBUTTON_LED);
        NRF_LOG_INFO("Received LED ON!");
    }
    else
    {
        bsp_board_led_off(LEDBUTTON_LED);
        NRF_LOG_INFO("Received LED OFF!");
    }
}

//Initialize LBS.
    init.led_write_handler = led_write_handler;

    err_code = ble_lbs_init(&m_lbs, &init);
    APP_ERROR_CHECK(err_code);

Now when I try to add the LBS_UUID_SERVICE in advertising_init() function as given below:-

#define NUS_SERVICE_UUID_TYPE   BLE_UUID_TYPE_VENDOR_BEGIN

#define LBS_SERVICE_UUID_TYPE   m_lbs.uuid_type

static ble_uuid_t m_adv_uuids[] = {
                                     {BLE_UUID_NUS_SERVICE, NUS_SERVICE_UUID_TYPE},
                                     {LBS_UUID_SERVICE, LBS_SERVICE_UUID_TYPE}
                                  };

The NUS UUID type is working fine but the LBS UUID type is giving me the error given below:-

Compiling ‘main.c’
2> C:\nRF5_SDK_15.2.0_9412b96\nRF5_SDK_15.2.0_9412b96\examples\ble_central_and_peripheral\experimental\ble_app_multirole_lesc\main.c:70:41: error: initializer element is not constant

Can you please tell where Am I going wrong???

RE: Adding Blinky features in my Example

Anubhav — Mon, 22 Apr 2019 11:01:56 GMT

Hi,

I could rectify the error by going through this thread.

Thank you for guiding me.

RE: Adding Blinky features in my Example

Anubhav — Mon, 22 Apr 2019 05:04:07 GMT

Hi,

I possibly knew where the error was but I didn't know how to check for the error. Thanks for providing the solution.

I added the log statement as given below in the services_init function.

NRF_LOG_INFO("The err_code is %d",err_code);
NRF_LOG_FLUSH() ;

static void services_init(void)
{
    uint32_t err_code;
    ble_nus_init_t     nus_init;
    ble_lbs_init_t     init     = {0};
    
    // Initialize NUS.
    memset(&nus_init, 0, sizeof(nus_init));

    nus_init.data_handler = nus_data_handler;

    err_code = ble_nus_init(&m_nus, &nus_init);
    APP_ERROR_CHECK(err_code);

    //Initialize LBS.
    init.led_write_handler = led_write_handler;

    err_code = ble_lbs_init(&m_lbs, &init);
    NRF_LOG_INFO("The err_code is %d",err_code);
    NRF_LOG_FLUSH() ;
    APP_ERROR_CHECK(err_code);
}

From the logs, the err_code is 4 which means No Memory for operation.

What should I do to increase the memory??

The Set Section Placement Macros list is attached below. Can you tell me what should I change in this and by how much?

FLASH_PH_START=0x0
FLASH_PH_SIZE=0x100000
RAM_PH_START=0x20000000
RAM_PH_SIZE=0x40000
FLASH_START=0x26000
FLASH_SIZE=0xda000
RAM_START=0x20003980
RAM_SIZE=0x3c680

RE: Adding Blinky features in my Example

Fred — Fri, 19 Apr 2019 19:09:01 GMT

I'm not sure if you know, but the FATAL error as you see in your logging occurs in most cases due to the APP_ERROR_CHECK. So, a quick way of detecting where this occurs is of course to simply add a logging statement before the APP_ERROR statements in your code (or at least where you expect it would go wrong). Printing the location and err_code in most cases will do. Don't forget to place a NRF_LOG_FLUSH() after each logging statement to have it printed before the next statement.

RE: Adding Blinky features in my Example

awneil — Fri, 19 Apr 2019 12:57:06 GMT

[quote userid="77902" url="~/f/nordic-q-a/46417/adding-blinky-features-in-my-example"]I am getting a FATAL ERROR.[/quote]

Where, exactly, do you get that fatal error?

Have you enabled the RTT logging? That should give you more information ...