APN

RE: APN

Hakon — Thu, 16 May 2019 12:59:28 GMT

Have you done any other modifications to the sample code? Or are you writing a project from scratch?

RE: APN

vkbakken — Mon, 13 May 2019 10:29:43 GMT

The problem got worse with latest version of firmware - where also ibasis sim fails massively. The ibasis card will find Telenor as operator - but not select it - alas - no:

+CEREG: 1 OR
+CEREG:1 OR
+CEREG: 5 OR
+CEREG:5 OR

So lte_lc.c init code hangs hard. This is the same if tested with telia sim with apn changed and AT%XSYSTEMMODE=0,1,0,0. Seems like telenor only supports band20. Will the modem figure this or should one try to lock the channel mask? What about Telia?

Latest Fw (.29-alpha) used and v0.4.0 for SDK.

RE: APN

vkbakken — Fri, 10 May 2019 09:44:10 GMT

That does not seem to result in any kind of change... Anything else that I should try?

RE: APN

Hakon — Mon, 29 Apr 2019 08:29:08 GMT

Hey, try putting the line "CONFIG_LTE_AUTO_INIT_AND_CONNECT=n" in .conf, and run modem_configure() after sending the +CGDCONT command.