Disconnection happened right after some seconds after connection with pairing?

RE: Disconnection happened right after some seconds after connection with pairing?

run_ar — Mon, 13 May 2019 08:29:06 GMT

To add bonding capabilities you should look at one of our projects that already have this. e.g. nRF5_SDK_15.3.0_59ac345\examples\ble_peripheral\ble_app_gls

Add the Peer Manager and make sure you handle the events described in the flow chart: Bonding: Passkey Entry with static passkey

RE: Disconnection happened right after some seconds after connection with pairing?

run_ar — Mon, 13 May 2019 08:24:13 GMT

you can use: https://www.nordicsemi.com/Software-and-Tools/Development-Tools/nRF-Sniffer

RE: Disconnection happened right after some seconds after connection with pairing?

Jaehong Park — Tue, 07 May 2019 06:18:50 GMT

I'm testing with the example, ble_app_uart, then I'd like to apply static passkey to our app using ble_app_uart. please let us know how to apply the static passkey to our app. I would thank you when you let us know the sample codes.

Thanks,

Jay Park

RE: Disconnection happened right after some seconds after connection with pairing?

Jaehong Park — Fri, 03 May 2019 15:55:22 GMT

I use RC as lf clock setting and I already setted the 500ppm setting in sdk_config.h file. Then let me know what tool I should use for capturing a sniffer trace of the air traffic.

Thanks,

Jay Park

RE: Disconnection happened right after some seconds after connection with pairing?

run_ar — Fri, 03 May 2019 12:08:20 GMT

Hi,

What is you Low frequency clock source and lf clock settings in sdk_config.h. Could you try using the 500ppm setting?

Can you also capture a sniffer trace of the on air traffic so I can see what is going on?