PERSISTANT_STORAGE with dongle w/ mesh SDK crashes.

RE: PERSISTANT_STORAGE with dongle w/ mesh SDK crashes.

Ryan — Thu, 23 May 2019 00:37:47 GMT

Any luck looking into this?

I got an implementation of the level server running on the dongle, but It would be great to have this button usable for testing mesh apps, like assigning it to remove the provisioning. Right now I have a HEX file that auto clears the provisioning, but would be great to have the button. I was able to get most of the GPIO's working that are on P0, so I think it has something to do with the interrupts for P1 on the dongle. Please update this ticket when you have a have a chnce to look into this or hear of a solution.

Thanks!

Ryan

RE: PERSISTANT_STORAGE with dongle w/ mesh SDK crashes.

Joakim Jakobsen — Wed, 15 May 2019 14:26:28 GMT

Hi again.

[quote user="rathomas"]You say it not supported, but then in some answers on this forum, but they say in other places there is no reason it shouldn't run.[/quote]

Yes, there isn't any reason that it shouldn't work on the dongle. It's just that we don't have any examples in the SDK for the dongle.

[quote user="rathomas"]I just purchased a couple of DK to debug, but I am not understanding why Nordic is selling a board that is perfect for Mesh SDK testing, but then not supporting it with any example code in the Mesh SDK. [/quote]

The only thing I can do about this is forward your feedback internally. Maybe in the future there will be support for the dongle in the nRF5 SDK for Mesh.
If you have any questions about

[quote user="rathomas"]I think there is something wrong with the interrupt init on P1 for this board, which may be related because the SW1 button (P1.06) on the dongle is not working in either of your examples for the PCA10059[/quote]

This I can look into.

Best regards,
Joakim

RE: PERSISTANT_STORAGE with dongle w/ mesh SDK crashes.

Ryan — Sun, 12 May 2019 07:29:33 GMT

I have the Server running, but the client does not. (Client is only running on the DK)

You say it not supported, but then in some answers on this forum, but they say in other places there is no reason it shouldn't run. I think there is something wrong with the interrupt init on P1 for this board, which may be related because the SW1 button (P1.06) on the dongle is not working in either of your examples for the PCA10059

I just purchased a couple of DK to debug, but I am not understanding why Nordic is selling a board that is perfect for Mesh SDK testing, but then not supporting it with any example code in the Mesh SDK.

You guys are getting a ton of questions about this because it's not clear why this is the case.

Thanks for the help,

Ryan

RE: PERSISTANT_STORAGE with dongle w/ mesh SDK crashes.

Joakim Jakobsen — Fri, 10 May 2019 09:12:52 GMT

Hi.

Sorry about the delay here.

As you might have seen, we don't support the nRF52840 Dongle in the nRF5 SDK for Mesh.

We do have a nRF52840 Dongle Programming tutorial that you can take a look at.

I'll take a look at the settings you are using for your project, and see if I'm able to have the light switch client/server run on the nRF52840 Dongle.

Best regards,
Joakim

RE: PERSISTANT_STORAGE with dongle w/ mesh SDK crashes.

Ryan — Mon, 06 May 2019 23:17:24 GMT

The nrf Connect application reports that my application size is 97296 bytes, so I have tried to adjust the linking paramerters to the following

FLASH_PH_START=0x0

FLASH_PH_SIZE=0x100000

RAM_PH_START=0x20000000

RAM_PH_SIZE=0x40000

FLASH_START=0x26000

FLASH_SIZE=0x17C10

RAM_START=0x2003DC10

RAM_SIZE=0x23F0

----

but when I do this I am getting compile errors:

Building ‘light_switch_server_nrf52840_xxAA_s140_6.1.0’ from solution ‘light_switch_server_nrf52840_xxAA_s140_6.1.0’ in configuration ‘Release’
Generating linker script ‘light_switch_server_nrf52840_xxAA_s140_6.1.0.ld’
Linking light_switch_server_nrf52840_xxAA_s140_6.1.0.elf
.bss is too large to fit in RAM memory segment
.heap is too large to fit in RAM memory segment
section .heap overlaps absolute placed section .stack
.bss is too large to fit in RAM memory segment
.heap is too large to fit in RAM memory segment
section .heap overlaps absolute placed section .stack
Build failed

----