The questions of current consumption in the datasheet

RE: The questions of current consumption in the datasheet

Amanda Hsieh — Mon, 13 May 2019 11:57:00 GMT

Hi,

Sorry for that I am not aware of the permission. There might be the useful information from that case for you:

In general I would say that pre- and post processing is CPU running code from flash, while radio TX and RX are with CPU idle for most part. If you want to run CPU while radio is in TX or RX, you may add about 2mA on the peak currents as a rough estimate.

-Amanda

RE: The questions of current consumption in the datasheet

Hsu — Mon, 13 May 2019 09:04:37 GMT

HI Amanda,

Thanks for the update.

The post for the CPU running CoreMark from Flash is private. (I got the Access Denied.)

Could you check this part?

Thank you

BRs, Han

RE: The questions of current consumption in the datasheet

Amanda Hsieh — Mon, 13 May 2019 07:59:04 GMT

Hi,

[quote user=""]What's difference w/ Iradio_tx0 and Is0? Why do we get higher consumption in Is0?[/quote]

Iradio_tx0 is measurement with CPU in WFI/WFE sleep as the Table 23 described. Is0 is measurement while CPU running CoreMark from Flash. Please see this post.

[quote user=""]What's the purpose and difference for "running from flash" (ex: Iddflashcache) and "running from RAM" (ex: Iddram)?[/quote]

It shows the data is taken from flash or RAM.

[quote user=""]How to set the "running from flash" or "running from RAM"?[/quote]

This post describes how to execute code from RAM using Keil, and the the tutorial shows the adjustment of RAM and Flash memory.

Best regards,

Amanda