nRF Thingy 52_ Mesh Demo

RE: nRF Thingy 52_ Mesh Demo

Simonr — Fri, 31 May 2019 08:29:07 GMT

I'm sorry, but we can't share other companies files like this. I suggest you either use a VPN or contact the Invensense support system.

Best regards,

Simon

RE: nRF Thingy 52_ Mesh Demo

talebi98 — Fri, 31 May 2019 07:25:07 GMT

Hello dear Simon,
I can not download the "Embedded Motion Driver 6.12" file.
Because the site does not allow me to download this file.
I also registered on the main site but I do not have permission to download.
May I give this file from you?

best regards.

RE: nRF Thingy 52_ Mesh Demo

Simonr — Tue, 14 May 2019 10:39:03 GMT

Hi Sunil

You have to download the prerequisites stated here before you can run the setup_sdk.bat

Prerequisites

Before running the scripts below, make sure you have the following software installed:

Git v2.xx.xx, Available from https://git-scm.com/. Use default configurations.
Install GNU ARM embedded toolchain v4.9-2015q3. Available from https://launchpad.net/gcc-arm-embedded/4.9/4.9-2015-q3-update. Use default configurations.
Make must be installed and be in system path. For example http://gnuwin32.sourceforge.net/packages/make.htm.
Create a user at https://www.invensense.com/. Under "Downloads" download "Embedded MotionDriver 6.12". Unzip the downloaded motion_driver_6.12 folder and navigate to motion_driver_6.12/mpl libraries/arm/Keil. Unzip the folder libmpllib_Keil_M4FP.zip. Copy the extracted library libmpllib.lib into <your Thingy folder>/libs/libmpllib_Keil_M4FP/. Finally, unzip /motion_driver_6.12/mpl libraries/arm/gcc4.9.3/liblibmplmpu_m4_hardfp.zip and copy the extracted library liblibmplmpu.a into the folder <your Thingy folder>/libs/liblibmplmpu_m4_hardfp/.

Bluetooth SoftDevice

Thingy FW version 2.0.0 is compatible with softdevice s132 v4.0.2

Best regards,

Simon

RE: nRF Thingy 52_ Mesh Demo

Sunil vignesh — Tue, 14 May 2019 06:34:45 GMT

Hi Simon,

once i run the setup_sdk.bat

the GIT path is not installed

is it right?

RE: nRF Thingy 52_ Mesh Demo

Simonr — Mon, 13 May 2019 09:03:32 GMT

Hi Sunil

It seems like the nRF Mesh SDK has not been extracted and renamed in the correct place. Please double check that you have done steps 1 and 2 correctly according to the demo.

Download and extract the Nordic Thingy:52 SDK and extract it, run the setup_sdk.bat.
Download Nordic nRF5 SDK for Mesh v1.0.1 and extract it under Thingy:52 SDK, rename the directory from "nrf5_SDK_for_Mesh_v1.0.1_src" to "mesh_sdk".

Best regards,

Simon

RE: nRF Thingy 52_ Mesh Demo

Sunil vignesh — Mon, 13 May 2019 07:47:55 GMT

https://www.youtube.com/watch?v=wa_ARkZSr_U&t=18s

the link is there