problem with Eddystone in nRF52832

RE: problem with Eddystone in nRF52832

NordicHam — Tue, 28 May 2019 08:59:22 GMT

No problem, thank you Torbjørn.

Regards
Jacques

RE: problem with Eddystone in nRF52832

ovrebekk — Tue, 28 May 2019 08:33:40 GMT

Hi Jacques

Thanks for the link.

I talked to Joakim, and he will pick up the case again (once he replied it dropped out of the active list, and he unfortunately forgot to respond).

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

ovrebekk — Tue, 28 May 2019 08:33:39 GMT

Hi Jacques

Thanks for the link.

I talked to Joakim, and he will pick up the case again (once he replied it dropped out of the active list, and he unfortunately forgot to respond).

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

NordicHam — Mon, 27 May 2019 09:06:04 GMT

Hi Torbjørn,

Here is the link:

https://devzone.nordicsemi.com/f/nordic-q-a/38729/nrf5_sdk_12-3-0_d7731ad---ble-peripheral-eddystone-beacon-application---cannot-connect

Regards
Jacques

RE: problem with Eddystone in nRF52832

ovrebekk — Mon, 27 May 2019 08:14:28 GMT

Can you send me a link to the other case, so I can follow up with whoever is handling it?

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

NordicHam — Sun, 26 May 2019 19:36:07 GMT

I have similar problem with example BLE Eddystone 15.3.0 on nRF52-DK with nRF Connect Android app:

- on Huawei T1 Mediapad with Android 4.3 I can connect
- on Moto G5 with latest Android I cannot connect (separate thread logged for this issue)

Interestingly, when I use SDK 12.3.0 on nRF51422 I can connect from both Android devices...

RE: problem with Eddystone in nRF52832

ovrebekk — Fri, 24 May 2019 06:46:34 GMT

Can you zip and send me your code project so I can give it a try on my side?

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

sree — Thu, 23 May 2019 10:17:27 GMT

i tried with this one uint8_t address_raw[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0xC6};

and also try with other value.But no result.

RE: problem with Eddystone in nRF52832

ovrebekk — Thu, 23 May 2019 10:10:09 GMT

There was a bug in my initial reply, and I fixed it some minutes later.

Which address did you try?

It should be this one:

uint8_t address_raw[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0xC6};

Not the one I originally posted.

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

sree — Thu, 23 May 2019 07:16:15 GMT

i added this to the gap_params_init() function. then it didnt detect in any phones

RE: problem with Eddystone in nRF52832

ovrebekk — Thu, 23 May 2019 06:23:34 GMT

It might be a caching problem.

Could you try to change the BLE address of the device and see if the problem disappears?

To do this please add the following code snippet to the gap_params_init() function in your example:

uint8_t address_raw[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0xC6};

ble_gap_addr_t address;

address.addr_type = BLE_GAP_ADDR_TYPE_RANDOM_STATIC;

memcpy(address.addr, address_raw, 6);
sd_ble_gap_addr_set(&address);

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

sree — Wed, 22 May 2019 05:48:12 GMT

Please update the suggestions....

RE: problem with Eddystone in nRF52832

sree — Tue, 21 May 2019 07:46:10 GMT

I am using honor 9 lite

Segger embedded studio is using to build

i tried to flash ble_app_blinky example. then same problem happened.

RE: problem with Eddystone in nRF52832

ovrebekk — Tue, 21 May 2019 07:24:32 GMT

Which phone are you having issues with?

Which compiler are you using to build the example?

If you try to flash another example into your kit, such as ble_app_blinky, will it work?

Best regards
Torbjørn

RE: problem with Eddystone in nRF52832

sree — Mon, 20 May 2019 09:18:32 GMT

first i flash program to nRf52810. it worked. then i changed led pin and necessary changes and flash program into nrf52832. then it not detect in nrf connect app in same phone. but it can detectable in other phones

RE: problem with Eddystone in nRF52832

NordicHam — Mon, 20 May 2019 08:06:35 GMT

So you have 2 Android phones:

Phone #1 can connect to nRF52810 and nRF52832
Phone #2 can only connect to nRfF2810

Is that correct?

RE: problem with Eddystone in nRF52832

sree — Mon, 20 May 2019 07:58:27 GMT

The code is fine. the problem is not connected to my phone. It connected to other phone but not to my phone that can connected to nRf52810 . Why this?

RE: problem with Eddystone in nRF52832

NordicHam — Sat, 18 May 2019 19:32:14 GMT

Hi Sree

I programmed this pre-compiled hex file into my nRF52-DK which has the nRF52832:

..\external\nRF5_SDK_15.3.0_59ac345\examples\ble_peripheral\ble_app_eddystone\hex\ble_app_eddystone_pca10040_s132.hex

Its working fine, I can connect to it using nRF Beacon for Eddystone Android app, as well as see the URL frames every 1 second in nRF Connect Android app.

Did you re-make the code after you've changed the led pin?

Regards

Jacques