Multicentral Zephyr Development Examples or Documentation

RE: Multicentral Zephyr Development Examples or Documentation

mpdas — Thu, 09 Jan 2020 00:15:37 GMT

I think ANT will be more scalable in the future. So we are going with that. Thanks anyways though.

RE: Multicentral Zephyr Development Examples or Documentation

Simon — Wed, 08 Jan 2020 10:39:05 GMT

Okay, do you want me to look into these problems or have you given up this approach?

RE: Multicentral Zephyr Development Examples or Documentation

mpdas — Tue, 07 Jan 2020 15:47:21 GMT

I tried the latest version of NCS before I gave up, and still had loads of problems.

RE: Multicentral Zephyr Development Examples or Documentation

Simon — Tue, 07 Jan 2020 09:33:46 GMT

Okay, good luck with your new approach.

However, it seems like this issue is fixed in the newest versions of NCS.

Best regards,

Simon

RE: Multicentral Zephyr Development Examples or Documentation

mpdas — Fri, 03 Jan 2020 19:37:40 GMT

I gave up, and have shifted from a multi-central application to an ANT shared channel using the Nordic SDK. I hope I will have better results.

RE: Multicentral Zephyr Development Examples or Documentation

Simon — Fri, 03 Jan 2020 19:35:32 GMT

I am sorry for the delay. Lately, a huge portion of the support team has been on Christmas vacation. Most of the staff will be back 6 of January 2020 and you can be sure to get an answer shortly after that.

Best regards,

Simon

RE: Multicentral Zephyr Development Examples or Documentation

mpdas — Sat, 21 Dec 2019 02:26:46 GMT

Any update on this? Im using Zephyr OS version, zephyr-v2.1.0-335-gce753ea49113, with a nrf52840. I am also attempting a multi-central application. I can connect to many centrals, but they all disconnect after about 10 seconds or so and reconnect, etc. Just like in natanbackwards description. I have tried lots of stuff to no avail. Im curious if this is still a bug, or what.

RE: Multicentral Zephyr Development Examples or Documentation

Bjørn Kvaale — Fri, 19 Jul 2019 08:54:20 GMT

Yep, looks like a bug. The disconnect reason for me is either 8 or 61. Error 8 refers to Exec format error, while error 61 points to a connection refused error. See errnho.h for more details. When I tested the uart peripheral example with nRF Connect for Mobile, everything worked fine out of the box. I believe there is an issue with the uart central example. I will take a closer look & update this thread.

Update: It seems this is a known issue, which will be fixed in a later release of NCS. Am checking if there is a workaround available now.

RE: Multicentral Zephyr Development Examples or Documentation

natanbackwards — Fri, 12 Jul 2019 13:28:19 GMT

My device is connecting and disconnecting by itself every few seconds without power cycling. I can't see how that could be by design. This is my console over the course of a few seconds without touching anything after the initial power cycle of the peripheral. Not to mention it doesn't detect any services after the initial connection.

***** Booting Zephyr OS v1.14.99-ncs1 *****
Starting NUS Client example
Bluetooth initialized
UART initialized
Scan module initialized
NUS Client module initialized
Scanning successfully started
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Security level was raised to 2
Service discovery completed
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Service not found
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Service not found
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Service not found
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Service not found
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Service not found
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)
Service not found
Disconnected: e5:ac:47:28:e8:c7 (random) (reason 8)
Filters matched. Address: e5:ac:47:28:e8:c7 (random) connectable: 1
Connected: e5:ac:47:28:e8:c7 (random)

RE: Multicentral Zephyr Development Examples or Documentation

Bjørn Kvaale — Fri, 12 Jul 2019 06:57:15 GMT

It seems that maybe this is the whole point of this example. From the testing procedure here, it seems that this may be done on purpose.

RE: Multicentral Zephyr Development Examples or Documentation

natanbackwards — Mon, 08 Jul 2019 22:04:39 GMT

Okay so for now I have decided to take a step back and test out just the standard central uart sample given. Just trying to get a single peripheral device to connect and reconnect on power cycle. This does not appear to work out of the box. The first time I connect it works fine but after a power cycle of the peripheral, the peripheral keeps reconnecting over and over again and doing rediscovery.

RE: Multicentral Zephyr Development Examples or Documentation

natanbackwards — Mon, 08 Jul 2019 14:00:49 GMT

I'll double check that but I think this was already updated. I'll be working on this more this week to see if I can make some headway thank you.

RE: Multicentral Zephyr Development Examples or Documentation

Bjørn Kvaale — Mon, 08 Jul 2019 11:52:49 GMT

You should be able to add the following code to the relevant zephyr code in the prj.conf file: CONFIG_BT_MAX_CONN=n, where you change n to be the number of connections you have. In the LTE Gateway example, we show how you can connect the 52840 via BLE to a Nordic Thingy:52.

RE: Multicentral Zephyr Development Examples or Documentation

Bjørn Kvaale — Mon, 01 Jul 2019 11:02:31 GMT

Take a look at this link to get started. Take a look at section 2.2 Create a light intensity controller. Regarding Zephyr with BLE, we recommend to use the standard nRF5 SDK. However, if you really want to use NCS for BLE, you can do this. I will get back to you on connecting to multiple devices, as a colleague of mine has done exactly this.