Flashing nRF51822 with U-link2

RE: Flashing nRF51822 with U-link2

Annim — Thu, 25 Dec 2014 07:40:47 GMT

Hi, i would like to request you to go and find the list of supported devices for ULink2 here... , and also, please find this post here... and also here , go through the answers too, Thus, get segger jlink lite and get started. Or if you able to use ulink2 with nrf51822, then surely post one short article about the same . I am using segger jlink lite for this. Good luck. Accept the answer which ever you find appropriate.

RE: Flashing nRF51822 with U-link2

ARUN — Thu, 25 Dec 2014 04:09:55 GMT

Sure. I am using WT51822 module (3rd party module).It's purchased from wavetek-Hong Kong. In my hand Ulink2 programmer, its how helpful to programming this module?.Its suitable for this? The programmer details for you http://www.keil.com/ulink2/

RE: Flashing nRF51822 with U-link2

Annim — Wed, 24 Dec 2014 16:21:21 GMT

Hi, nice to see you putting effort, but i would like to request you to write your other textual context in big message box and keep your heading small and to point and make it catchy so more and more people come to help you out. Before trying to answer you, i would like to know what board you are using? any 3rd party module or dev kit?to program the nrf chip you just need 4 pins according to me, one is vdd, gnd, SWDIO and SWCLK, and the supported cortext M0 programmer. Do let me know what board you are using then only we can think further.!!!!