Softdevice clock Operation failing

RE: Softdevice clock Operation failing

dmleone — Wed, 17 Jul 2019 18:24:40 GMT

ok i simply did as suggested and got it to compile.

RE: Softdevice clock Operation failing

Simonr — Wed, 17 Jul 2019 10:25:08 GMT

I'd still recommend starting out with a SoftDevice example and add what you need to that, as this process seems to be more cumbersome. We have a guide for how to adjust RAM and flash here, please double-check that this was done correctly.

Best regards,

Simon

RE: Softdevice clock Operation failing

dmleone — Tue, 16 Jul 2019 20:43:22 GMT

no problem with delay. I need to incorporate it into the current program. I have found most things and i can get it to compile however when i try and debug the program i get a stopped by vector crash error or report. I followed the guide for the memory mapping based on link you sent.

Now i am getting this error

Even though my memory mapping flash files has these declared.

RE: Softdevice clock Operation failing

Simonr — Tue, 16 Jul 2019 12:19:12 GMT

Add the header files located in "nRF5_SDK_15.2.0_9412b96\components\softdevice\s132\headers\". Modify the flash and RAM settings according to the Memory Resource Requirements in the S132 SoftDevice specification. Then, make sure the preprocessor definitions are set (which you have done already).

The easiest way is to just start out with an example using the SoftDevice already, and go from there, but if you want to implement it into an existing project, the above instructions should be the way.

Due to the summer holidays in Norway, our support team is understaffed this week, and delayed replies must be expected. Sorry for the inconvenience!

Best regards,

Simon

RE: Softdevice clock Operation failing

dmleone — Tue, 16 Jul 2019 12:17:29 GMT

there are a couple files that are either/or for sd or no soft devic. I deleted the following:

Deleted from preprocessor include list

$(SolutionDir)/nRF5_SDK_15.3.0/components/drivers_nrf/nrf_soc_nosd

Removed from project

nrf_nvic.c from nrf_drivers

nrf_soc.c from nRF_Libraries

I am getting a bunch of error i think are related to the linker file but i cant seem to figure out how to do the linker file within SES