https://devzone.nordicsemi.com/f/nordic-q-a/5062/nrfgo-studio-does-not-recognise-nrf51The Segger programing interface works. The virtual com port appears on my PC (COM5). The problem is that there is no board listed in the Motherboards section of the Device Manager. I have loaded and verified the application nRFgoFirmware_7000.hex anden-USTelligent Community 13Fri, 16 Jan 2015 12:53:15 GMThttps://devzone.nordicsemi.com/thread/17804?ContentTypeID=1Fri, 16 Jan 2015 12:53:15 GMT137ad170-7792-4731-bb38-c0d22fbe4515:fe02cebe-9539-4b30-9419-4683daa76500Chris Watts<p>It is not possible to run the 2.4GHz radio tests through nRFgo Studio. The solution is to load the radio_test_pca10028 example and control it from a terminal programme. Interestingly, although this example application is supposed to be a single character command, it seems to need a space character after the commend character to work properly.</p><div style="clear:both;"></div>https://devzone.nordicsemi.com/thread/17803?ContentTypeID=1Wed, 14 Jan 2015 13:17:54 GMT137ad170-7792-4731-bb38-c0d22fbe4515:e12ffbc3-fb4a-4be9-a836-2838c9f6fa2eChris Watts<p>Testing COM5 with a terminal program I can see data on P0.11 so the USB com port seems to be working. The nRFgo Studio software does not generate any data on P0.11</p><div style="clear:both;"></div>