Radio Test

RE: Radio Test

Gerber — Mon, 12 Aug 2019 18:10:05 GMT

Got it working. Thanks.

RE: Radio Test

Hung Bui — Mon, 12 Aug 2019 15:28:27 GMT

Hi,

It should be quite straight forward. For example to do a modulated carrier at frequency 2440MHz you do this:

start_channel 40

start_tx_modulated_carrier

RE: Radio Test

Gerber — Mon, 12 Aug 2019 14:43:48 GMT

Hell Hung Bui

I programmed my boards using Segger. Originally, I was using Keil. I'm not sure why this is the case.

Now that the boards are working with the radio test example, if I try to initialize a start channel and then begin transmission, I cannot detect anything on the receiving board. Is there a step by step procedure for transmitting a pattern and then receiving it?

thanks

RE: Radio Test

Hung Bui — Mon, 12 Aug 2019 07:59:49 GMT

Could you take a screenshot of the log when you do the commands with nrfjprog ?
Have you tried to flash other examples, for example the blinky project ?

RE: Radio Test

Gerber — Fri, 09 Aug 2019 14:31:30 GMT

I erased the flash but I receive the same error after attempting to reprogram.

RE: Radio Test

Hung Bui — Fri, 09 Aug 2019 12:32:19 GMT

Hi Gerber,

Maybe you need to do an eraseall on the chip (nrfjprog --eraseall) . If the softdevice already on the chip you wouldn't be able to flash the radio_test example.