nRF9160 Trouble upgrading Modem Firmware

RE: nRF9160 Trouble upgrading Modem Firmware

GBSingh — Thu, 15 Aug 2019 07:36:59 GMT

[Solution] : If for some reason you cannot read the NRF91 using the cmd or nrfConnect App , make sure you have Switch 10 in 'INT Position' [Toggle a few times just in case it doesnt work at first ]

RE: nRF9160 Trouble upgrading Modem Firmware

GBSingh — Tue, 13 Aug 2019 14:05:03 GMT

Hey Carl,

- When The SW5 is set to nRF91 (Device appears in the OS) , also I get this JlinkARM.dll error

- When I connect SW5 to nRF52 (Device appears in the OS) , I can read using nrfjprog and nRFConnect

Thanks ,

Gurbir

RE: nRF9160 Trouble upgrading Modem Firmware

GBSingh — Tue, 13 Aug 2019 13:45:53 GMT

Hey Martin ,

Thanks for the quick reply, I appreciate the help .

- I have 1 DK currently connected to my Computer (3 COM Ports)

- I just tried 2/3 cables which I often use with NRF51/52 with No success

- The Debug IC (PCA10090) LED is turned on , but the other LEDs(LED 1~4) are not blinking

- Running all the latest versions

Thanks,

Gurbir Singh

RE: nRF9160 Trouble upgrading Modem Firmware

Carl Richard — Tue, 13 Aug 2019 13:39:20 GMT

Hello, Gurbir!

Could you check if the switch SW5 is set to nRF91 and not nRF52? Secondly, are you using the same cable when testing the two kits. If so that could be an issue.

Edit: please state whether the device appear as connected or not in the OS of your computer.

Hope this helps!

Best regards,
Carl Richard

RE: nRF9160 Trouble upgrading Modem Firmware

Martin Lesund — Tue, 13 Aug 2019 13:36:48 GMT

Hi Gurbir,

Please check your device manager:

As you can see I have two nrf91DKs hooked up to the computer.

Are there any LEDs blinking on the DK?

Check with the command 'nrfjprog -v' that you have the correct versions.

It is important that you use a micro USB cable that actually supports sending data. We have seen that some cables only support power, no data. (Typical charging cable)