Display sensor data in mesh network using PuTTY

RE: Display sensor data in mesh network using PuTTY

Dan100 — Tue, 03 Sep 2019 11:38:31 GMT

alright thanks Mttrinh,

I appreciate your..I will work on it

RE: Display sensor data in mesh network using PuTTY

Mttrinh — Tue, 03 Sep 2019 11:26:41 GMT

Hi,

Debug print over UART is not implemented in the Mesh SDK. You should have a look at the proximity coexist example and see how logging is initialized there. Then try to port the logging functionality from the proximity coexist example to your application.

RE: Display sensor data in mesh network using PuTTY

awneil — Mon, 02 Sep 2019 19:40:18 GMT

No - you need to to reconfigure the NRF Logging module.

I prefer to use Keil to view the sdk_config.h file. I find it gives the best view & editing experience - irrespective of what else you use for the rest of your development:

https://devzone.nordicsemi.com/f/nordic-q-a/45366/missing-defines-in-generic-sdk_config-h/178339#178339

I attached a project here that you can use:

https://devzone.nordicsemi.com/f/nordic-q-a/47937/mesh-compilation-error/190186#190186

RE: Display sensor data in mesh network using PuTTY

Dan100 — Mon, 02 Sep 2019 18:13:55 GMT

Here is how my own is showing from SEGGER Embedded Studio. Can I just change #define NRFX_UART_ENABLED 0 to #define NRFX_UART_ENABLED 1; remember i made mention of nrf mesh sdk

RE: Display sensor data in mesh network using PuTTY

Dan100 — Mon, 02 Sep 2019 18:11:48 GMT

RE: Display sensor data in mesh network using PuTTY

awneil — Mon, 02 Sep 2019 17:39:08 GMT

RE: Display sensor data in mesh network using PuTTY

Dan100 — Mon, 02 Sep 2019 17:31:46 GMT

I could'nt locate NRF_LOG_BACKEND_SERIAL_USES_UART in sd_config.h...I already searched thoroughly.

RE: Display sensor data in mesh network using PuTTY

awneil — Mon, 02 Sep 2019 16:32:42 GMT

[quote userid="81506" url="~/f/nordic-q-a/51675/display-sensor-data-in-mesh-network-using-putty"]At the moment, I can view sensor data using Jlink RTT viewer.[/quote]

So you're using NRF_LOG_INFO() ?

Then just reconfigure the NRF_LOG to use UART instead of RTT - it's in the sdk_config.h ...