Building Thingy Mesh Provisioning Demo v0.6

RE: Building Thingy Mesh Provisioning Demo v0.6

matej1410 — Mon, 16 Sep 2019 11:53:27 GMT

Everything works great. The problem was: "At point 9 you then need to point SDK_ROOT to the location where you unzip nRF52 SDK v15.3". I just set wrong location to point SDK_ROOT

RE: Building Thingy Mesh Provisioning Demo v0.6

matej1410 — Mon, 16 Sep 2019 11:34:21 GMT

Hi Hung Bui.

Thanks for your instant reply!

I have another question. In section 5 we can find:
"Clone this repo into \examples\ (so that thingy_provisioning_demo.emProject is 2 levels under "examples" folder. )"
But I have two "examples" folders.

First one appears after extracting nRF5 Mesh SDK v3.2.0

Second one appears after extracting nRF5 SDK v15.3

Wich one is the right one for "Clone this repo into \examples\ (so that thingy_provisioning_demo.emProject is 2 levels under "examples" folder. )"?

RE: Building Thingy Mesh Provisioning Demo v0.6

Hung Bui — Fri, 13 Sep 2019 08:57:48 GMT

Hi Matej,

At point 1 you should download SDK v3.2.0 not SDK v2.2.0. It's my mistake.

At point 3, you can unzip the nRF5 SDK v15.3 at any place. I would assume you already have the SDK installed earlier ?

At point 9 you then need to point SDK_ROOT to the location where you unzip nRF52 SDK v15.3