Extended Adverts, AUX Ptr and the 'Aux Offset' value

RE: Extended Adverts, AUX Ptr and the 'Aux Offset' value

Edvin — Mon, 07 Oct 2019 07:09:45 GMT

It is fixed fixed. I guess the timing is so that it will fit into all advertisement intervals, and it probably also has to do with current consumption.

RE: Extended Adverts, AUX Ptr and the 'Aux Offset' value

Mahendra Tailor — Fri, 04 Oct 2019 13:00:36 GMT

Thank you for getting back.

I am not too bothered that it cannot be set. I fully understand that Extended Adverts is work in progress and complex.

However can you please ask the team, why that specific value of around 4400us?
(Which is well withing the minimum advert interval of 20ms so I can sort of understand it being 4.4ms)

And as importantly is it a fixed value or some function of the Advert Interval?

I hope you accept it is a reasonable request for information :-)

RE: Extended Adverts, AUX Ptr and the 'Aux Offset' value

Edvin — Fri, 04 Oct 2019 12:50:34 GMT

That was quick.

So yes, the Aux offset is set to a fixed value in the softdevice, but it is not possible to access/change this from the application, unfortunately.

Best regards,

Edvin

RE: Extended Adverts, AUX Ptr and the 'Aux Offset' value

Edvin — Fri, 04 Oct 2019 12:38:11 GMT

[quote user="mtailor"]I cannot provide the nRF Sniffer trace because I have been told by Nordic that it is not capable of capturing extended adverts.[/quote]

That is correct.

Thank you for explaining. I believe I understood your question now. I am not sure exactly where this is set, or if it is possible to change or not. Let me check with our SoftDevice team, and get back to you.

Best regards,

Edvin

RE: Extended Adverts, AUX Ptr and the 'Aux Offset' value

Mahendra Tailor — Fri, 04 Oct 2019 11:49:16 GMT

Hi
The sniff trace is from the Frontline SoderaLE and you can download the free viewer from frontline.com.

I cannot provide the nRF Sniffer trace because I have been told by Nordic that it is not capable of capturing extended adverts.

Anyway, what I have is three ADV_EXT_IND packets in the three primary advert channels.
That new advert pkt type contains the CEAP payload which has the AuxPtr field which has a time value that tells the scanner when the AUX_ADV_IND will be sent on the secondary channel. That time value is called AuxOffset.

That time value can be up to about 2.5 seconds later (from memory - I have not rechecked, but I recall reading a value of about 250000 microseconds and I presume that it was with 30us units).

The AuxPtr field also provide which channel and phy it will appear in. See 5.0 or 5.1 spec and look for the CEAP section.

CEAP= Common Extended Advert Payload.

Anyway given that the AuxOffset time specifies that time. I cannot see any way to set it when I call the function to start adverts.

At the moment the softdevice just seems to have plucked the 4410 us out of thin air :-)
Why that value specifically?

BTW: The times are 4410/2490/1470 in the three primary advert because they happen one after the other and so to point to an anchor point for the AUX_ADV_IND in the future it necessarily needs to decrease the time which is supposed to be calculated from the start of the packet containing that time.

I hope I explained the issue.

Thank you for responding.

Kind regards
Mahendra

RE: Extended Adverts, AUX Ptr and the 'Aux Offset' value

Edvin — Fri, 04 Oct 2019 11:28:30 GMT

Hello Mahendra,

I am not too familiar with the sniffer that you used to attach the trace, and hence, I don't think I understand your question.

You are asking about some offsets. Are these offsets the time between the advertising packets? So one time offset is 4410 µs, one is 2490µs and one is 1470µs. Are you asking why one of the offsets is 4410µs?

Is it possible to provide another sniffer trace? Either using the nRF Sniffer trace (.pcapng file) or Ellisys (.btt file).

Where is the 4410µs offset from? Is it the time between the advertising packet on channel 39 and advertising channel on channel 37?