DTM test

RE: DTM test

Kaja — Wed, 16 Oct 2019 13:37:04 GMT

Hi Sonal,

the DTM application is designed to be used with a BLE tester and is only responding to DTM specific commands, documented in the Bluetooth Core spec. For DTM, you can see this, and here for the DTM library .

You can use the nRFgo Studio to set up the TX with DTM.

If your doing FCC or similar certification I would recommend using the Radio test example.

Best regards,
Kaja

RE: DTM test

bscdb — Tue, 15 Oct 2019 13:43:05 GMT

Thanks . How do I send the unmodulated carrier? Is there a dtm command for that?

RE: DTM test

Kaja — Tue, 15 Oct 2019 11:40:44 GMT

Hi Sonal,

the radio test example is the best to use when your testing the Radio functionality, harmonics, ect: https://infocenter.nordicsemi.com/topic/com.nordic.infocenter.sdk5.v15.3.0/nrf_radio_test_example.html?cp=5_1_4_6_29

You can see this whitepaper: https://infocenter.nordicsemi.com/pdf/nwp_006.pdf?cp=12_21

Or if you want to do production testing, here is our application note on how to that with DTM: https://infocenter.nordicsemi.com/topic/struct_appnotes/struct/appnotes_nan34.html?cp=11_3

If you want to test if it´s working, you can send a TX unmodulated carrier, and see if you see that on the spectrum analyzer.

Best regards,
Kaja