Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Heidi — Mon, 28 Oct 2019 10:26:02 GMT

Hi, I see you've already made a new ticket with this new issue. Please wait for a response there. Since you solved the issue related to this ticket, I will close this case.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Mon, 28 Oct 2019 10:04:08 GMT

Hi,

Now I want to send gps coordinates via sms. I am working on gps program. How can I do that? Is there any program available?

Thanks

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Fri, 25 Oct 2019 09:00:25 GMT

Hello,

I changed the prj.conf file and used Orange Sim Card as Free sim was not working. Now I am able to send the sms.

Thank you for the help.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Heidi — Thu, 24 Oct 2019 13:44:14 GMT

Thank you. From the +CNUM documentation:

An ERROR response is returned if MSISDN is not available on SIM card or if SIM card is not initialized.

So the MSISDN is probably not available on the Boyugues SIM card.

Again, have you confirmed that the network you are on supports SMS?

Have you made sure the prj.conf file enables the correct configs with regard to what network you're on?

Are you on NB-IoT or LTE-M?

Please attach your full working directory including the prj.conf file and CMakeLists.txt file.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Thu, 24 Oct 2019 12:14:25 GMT

Hello,

I am attaching the link for C code.

https://github.com/jagrutik9/Git-test/blob/master/main.c

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Heidi — Thu, 24 Oct 2019 12:01:02 GMT

A screenshot of part of your code doesn't help me much. Please attach the .c file so I can reproduce your error.

[quote user="Jagruti_N2A"]Am I using AT commands correctly or there is some mistake?[/quote]

It looks like you're using the correct AT commands.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Thu, 24 Oct 2019 11:55:39 GMT

Hello,

When I was using Bouygues, it was showing error for AT+CNUM command. Now I am using Free sim card. It's not showing error. But when I run the code, LTE monitor stops at ***** Booting Zephyr OS v1.14.99-ncs2 *****. Nothing happens after this. I have attached the screenshot for code.

Sequence for AT command is:

"AT+CPIN=1234",
"AT+CFUN?",
"AT+CFUN=1",
"AT+CFUN?",
"AT+CNUM"
"AT+CEREG?",
"AT+CNMI=3,2,0,1",
"AT+CMGS=17\r07913396050096F511000B913367398624F30000AA03E8721E\x1A",

Am I using AT commands correctly or there is some mistake?

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Heidi — Thu, 24 Oct 2019 11:22:28 GMT

Hi, I can't see where in your code you're sending the AT+CNUM command, nor can I see this from LTE Link Monitor. Please attach your complete code and the complete logfile from running the code on the DK.

Are you connecting with LTE-M or NB-IoT? Have you confirmed that Bouygues supports and has deployed SMS functionality?

Best regards,

Heidi

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Thu, 24 Oct 2019 09:39:08 GMT

Hi, Now I am using my sim card (bouygues operator). But it stucks at ***** Booting Zephyr OS v1.14.99-ncs2 *****. Nothing happens after this. I am attaching the screenshots of prograpm with AT commands which I have used and terminal. Please tell me where I am doing mistake. Also AT+CNUM command shows ERROR.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Heidi — Thu, 24 Oct 2019 09:18:44 GMT

Hi, are you using the iBasis SIM card that comes with the DK?

If yes, it unfortunately, does not support SMS so you'll have to purchase a SIM card from a local provider that supports SMS.

If you are using a local provider already, take a look at this thread for more information. It provides a working example as well.

Best regards,

Heidi

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Wed, 23 Oct 2019 16:17:47 GMT

Hi,

I tried at_client application also. All AT commands are running. Except CMGS. It shows error. I have to send sms using Nordic nrf9160dk. How can I do that. Please help me with it.

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

Jagruti — Wed, 23 Oct 2019 15:54:31 GMT

Hi,

I have not send those commands, this is the output when I run the program "simple_at". I have modified simple_at program.

I wrote these AT commands in the program: "AT+CGMM", "AT+CGDCONT?", "AT%XCBAND=?", "AT+CGSN=1",
"AT+CESQ", "AT+CFUN?", "AT+CFUN=1", "AT+CFUN?", "AT+CEREG?",
"AT%XSIM=1", "AT%XSIM?", "AT+CFUN?", "AT+CFUN=1",
"AT+CNMI=3,2,0,1", "AT+CNMI?"

RE: Hello, I am using simple_at program to send sms. But it is not working. Commands like AT+CFUN?, AT+CFUN=1, AT+CEREG? are working, but when i use AT+CMGS command, other commands appear on the terminal and it shows error. I am not able to send sms.

MJD093 — Wed, 23 Oct 2019 14:25:24 GMT

Hi there,

It looks like you are using the wrong AT application for what you are trying to do.

The simple_at application is designed to demonstrate hardcoded at commands one at a time and then shutdown. This application does not offer the ability to accept UART messages and run them, it is simply a demo program that runs and then sits idle until a reset.

The at_client application found in the ncs repository is an AT application that you can manually enter AT commands via the USB-UART bridge using the LTE Link Monitor for nRF Connect. If you flash that application to your device, you can enter all the commands you have tried to send in the image above.