How to configure beacon to receive data/indication from a gateway or external device ?

RE: How to configure beacon to receive data/indication from a gateway or external device ?

Håkon — Tue, 03 Dec 2019 10:25:30 GMT

Hi,

When a device is advertising (a typical beacon advertises only) it is possible to add a scan response packet only sent when someone responds to the advertising data. It can be possible to alter the scan response packet depending on who it is that responds to the advertisement. I am not sure what you mean with beacon mode, but I wonder if you think of a device which is non-connectable and advertising only?

However it sounds like you want to create a connectable device which advertises until someone connects to it. The BLE Blinky Application example advertises indefinitely, but can be connected to at any point in time. When connected to it is possible to send commands to the device.

RE: How to configure beacon to receive data/indication from a gateway or external device ?

Jaydev Borkar — Tue, 03 Dec 2019 02:57:28 GMT

Hi ,

my question is simple. can I have bidirectional communication using nRF52 in beacon mode .

RE: How to configure beacon to receive data/indication from a gateway or external device ?

Håkon — Mon, 02 Dec 2019 17:51:55 GMT

Hi,

I do not fully understand what you try to achieve.

What do you mean by saying that you are done "beaconing"?

I would recommend having a look at some of our short range - ble tutorials.

This tutorial discusses advertising, and is a good place to start
https://devzone.nordicsemi.com/nordic/short-range-guides/b/bluetooth-low-energy/posts/ble-advertising-a-beginners-tutorial