Programming FANSTEL Modules

RE: Programming FANSTEL Modules

Kenneth — Mon, 16 Dec 2019 09:10:50 GMT

My recommendation is to get yourself an nRF52840-DK and use the nRF5 SDK. Then check out this:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v16.0.0/nrf52811_user_guide.html?cp=6_1_5_1

Once you first verify it works on the nRF52840-DK, then next step is to transfer it to your nRF52811 enabled hardware:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v16.0.0/nrf52811_user_guide.html?cp=6_1_5_1_3#ug_52811_project

Aks666 — Fri, 13 Dec 2019 06:40:04 GMT

I have programmed the module using DK with beacon example but i can not see the beacons in nRF Connect app.

Will you suggest the SDK for BM833A(NRF52811) and softdevice.

Aks666 — Thu, 12 Dec 2019 13:18:34 GMT

How can i program external modules using nRF52833-DK??

Also if debugging is possible?

Kenneth — Thu, 12 Dec 2019 12:09:59 GMT

You can program external boards from nRF52833-DK provided VDD is about 3V on target board.

Nguyen Hoan Hoang — Thu, 12 Dec 2019 10:03:33 GMT

Not possible, SES only works with JLink. To use other JTag tool, you can use OpenOCD with Eclipse.