Flashlog Backend - not all logs available afte reset

RE: Flashlog Backend - not all logs available afte reset

Simonr — Fri, 20 Dec 2019 08:28:43 GMT

Thank you for sharing your solution, Stefan!

Best regards and Happy Holidays,

Simon

RE: Flashlog Backend - not all logs available afte reset

stes — Fri, 20 Dec 2019 07:48:34 GMT

Hi Simon,

me again. It works now, but using NRF_LOG_WARNING. I removed all NRF_LOG_PUSH and NRF_LOG_FINAL_FLUSH which I added before as only my logs did not appear in the flashlog...

Sorry for wasting your time...

Stefan

RE: Flashlog Backend - not all logs available afte reset

stes — Thu, 19 Dec 2019 14:10:27 GMT

Hi Simon,

thanks for the fast response. I just wanted to make sure that if I have seen a log by calling "flashlog read" I should be able to see it also after a reset of the firmware.

So I do not have to call any other function in order to write the stuff to flash?

Regards

Stefan

RE: Flashlog Backend - not all logs available afte reset

Simonr — Thu, 19 Dec 2019 13:53:57 GMT

If the flashlog is initialized and enabled the logs should be stored until the flash memory is erased. What pages of the flash is the flashlog supposed to write to in your application? Can you show me how you initialize, configure and enable the flashlog module in your application? Also, are you able to provide an error code of some kind?

Best regards,

Simon

PS: The Holiday season is upon us, which will leave us understaffed until January 6th, 2020. This means that delayed replies will occur during this time. Sorry about the inconvenience and happy Holidays!