How to enable Child supervision in thread FTD

RE: How to enable Child supervision in thread FTD

Marjeris Romero — Fri, 17 Jan 2020 14:23:48 GMT

Hi,

Could you provide us with a sniffer trace using our nRF Sniffer for 802.15.4? Maybe this can better explain what is happening.

Best regards,

Marjeris

RE: How to enable Child supervision in thread FTD

Bhumika — Fri, 10 Jan 2020 07:53:23 GMT

Hi,

I have again checked the whole process, but still facing the same issue. NON CONFIRMABLE messages don't reach the coap server while CONFIRMABLE messages are do reach.

The only change I did is replaced "libopenthread-cli-ftd.a", "libopenthread-ftd.a", "libopenthread-mtd.a" with the openthread libraries build with CHILD_SUPERVISION enable option.

Is there something else I can try to test the NON-CONFORMABLE packet transfer issue.

RE: How to enable Child supervision in thread FTD

Bhumika — Wed, 08 Jan 2020 05:29:52 GMT

I haven't changed anything else in the project.

My current stack is based on nrf SDK for Thread and Zigbee V2.0.0.

and as per its documentation I am using the following openthread commit

github.com/.../704511c (with revert of 136a444)

The issue is only in case of NON CONFORMABLE coap message type. If changed to CONFORMABLE everything is working.

RE: How to enable Child supervision in thread FTD

Marjeris Romero — Tue, 07 Jan 2020 14:12:11 GMT

Hi,

Is there anything else you have changed in the project? The coap message type is not a compile-time config, so it sounds a bit weird that this is changed after recompiling the stack.

Did you use the right commit when building the stack? You should use the specific OpenThread commit used in the SDK you are using to make sure your are not changing something else in the project. See the release notes inside SDK_folder/documentation/release_notes.txt for the commit ID.

BR,

Marjeris

RE: How to enable Child supervision in thread FTD

Bhumika — Tue, 07 Jan 2020 05:48:15 GMT

Hi,

Thanks for the update.

I have done this, and not getting this error now.

But since I have updated OpenThread Stack, my coap client is unable to send NON-CONFORMABLE coap message.

If I change the coap message type to CONFORMABLE, it sends the message.

Rest everything is same.

For enabling the child supervision feature, I have only updated libopenthread-ftd.a and libopenthread-mtd.a in the nrf_sdk.

While building the openthread stack I used the following make command..

make -f examples/Makefile-nrf52840 COMMISSIONER=1 JOINER=1 COAP=1 DNS_CLIENT=1 MTD_NETDIAG=1 BORDER_ROUTER=1 MAC_FILTER=1 UDP_PROXY=1 BORDER_AGENT=1 DHCP6_SERVER=1 DHCP6_CLIENT=1 CERT_LOG=1 COAPS=1

RE: How to enable Child supervision in thread FTD

Marjeris Romero — Mon, 06 Jan 2020 13:32:20 GMT

Hi,

Did you set the OPENTHREAD_ENABLE_CHILD_SUPERVISION macro on the OT config and builded the OT stack again? Or did you change the macro only inside the project files? You need to build the OpenThread stack again in order to enable child supervision.

See 'How to enable child supervision' page:

To enable Child Supervision, define OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE as 1 in the /src/core/config/child_supervision.h file, prior to building OpenThread.

Best regards,

Marjeris