Segger Embedded Studio for RF9160 DK - solution load command failed (1)

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

Martin Lesund — Thu, 16 Jan 2020 12:14:09 GMT

Hi Bertie,

That is good news.

Could you ensure that you start with a clean build directory when trying to import the project?

Delete the build folder and then try to open up the project again.

If you have had issues prior (with the configuration) and you re-configure in the same build folder, it may give you issues, so removing the build folder manually between each import is highly recommended.

Best regards,

Martin L.

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

bertiew — Thu, 16 Jan 2020 10:44:02 GMT

Thanks Martin, I just changed folder name "nRF Connect SDK" to "nRFConnectSDK", and it works! see log:

Loading solution asset_tracker.emProject
Executing load commands
cmake -GNinja -DBOARD=nrf9160_pca10090ns -DBOARD_DIR=C:/My_Designs/nRFConnectSDK/V1_1_0/ncs/zephyr/boards/arm/nrf9160_pca10090 -DZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb -DGNUARMEMB_TOOLCHAIN_PATH=C:/gnuarmemb -BC:/My_Designs/nRFConnectSDK/V1_1_0/ncs/nrf/applications/asset_tracker/build_nrf9160_pca10090ns -HC:/My_Designs/nRFConnectSDK/V1_1_0/ncs/nrf/applications/asset_tracker -DEXTRA_KCONFIG_TARGETS=menuconfig_ses -DEXTRA_KCONFIG_TARGET_COMMAND_FOR_menuconfig_ses=C:/arm_segger_embedded_studio_v430c_win_x64_nordic/html/configure_nordic_project_menuconfig.py
Failed to create ConsoleBuf!
setActiveInputCodepage failed!
Failed to create ConsoleBuf!
setActiveInputCodepage failed!
-- Using application from 'C:/My_Designs/nRFConnectSDK/V1_1_0/ncs/nrf/applications/asset_tracker'
Zephyr version: 2.0.99
-- Selected BOARD nrf9160_pca10090ns
-- Found west: C:/Python37/Scripts/west.exe (found suitable version "0.6.3", minimum required is "0.6.0")
-- Cache files will be written to: C:\Users\bertiew\AppData\Local/.cache/zephyr
USING OUT OF TREE BOARD
-- Loading C:/My_Designs/nRFConnectSDK/V1_1_0/ncs/zephyr/boards/arm/nrf9160_pca10090/nrf9160_pca10090ns.dts as base
-- Overlaying C:/My_Designs/nRFConnectSDK/V1_1_0/ncs/zephyr/dts/common/common.dts
Devicetree configuration written to C:/My_Designs/nRFConnectSDK/V1_1_0/ncs/nrf/applications/asset_tracker/build_nrf9160_pca10090ns/zephyr/include/generated/generated_dts_board.conf

Parsing Kconfig tree in C:/My_Designs/nRFConnectSDK/V1_1_0/ncs/nrf/applications/asset_tracker/Kconfig

Loading session data from file
SEGGER Embedded Studio is ready to use

BTW, the message "Failed to create ConsoleBuf!" is a problem? But no problem to build solution

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

Martin Lesund — Wed, 15 Jan 2020 14:59:12 GMT

Hi Bertie,
The issue may be that it is a too long path or that there is a space between "nRF Connect":

Could you try to change: "C:/My_Designs/nRF Connect SDK/V1_1_0/ncs/zephyr/boards/arm/nrf9160_pca10090"

to" C:/My_Designs/ncs/zephyr/boards/arm/nrf9160_pca10090"

so remove: /nRF Connect SDK/V1_1_0/ from path.

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

bertiew — Wed, 08 Jan 2020 12:22:46 GMT

Hi Martin,

I updated 'nrfjprog' and down graded python to V3.7.1 by "choco install python --version=3.7.1 --allow-downgrade"

Environment Variables "Python37" at the top path :

When did "pip3 install -r zephyr\scripts\requirements.txt", there were a few similar warnings:

"west 0.6.3 has requirement setuptools>=v40.1.0, but you'll have setuptools 39.0.
1 which is incompatible."

"The script pygmentize.exe is installed in 'c:\python37\Scripts' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location."

When did "nrf\scripts\requirements.txt" "mcuboot\scripts\requirements.txt", similar warnings

After that, still got same error when tried Open nRF Connect SDK Project.

So what I did was to Clone nRF Connect SDK to a new folder, and did following again:

C:\Windows\system32>pip3 install west

C:\Windows\system32>python -m pip install --upgrade pip

C:\My_Designs\nRF Connect SDK\V_110\ncs>west init -m github.com/.../fw-nrfconnect-nrf --mr v1.1.0

C:\My_Designs\nRF Connect SDK\V_110\ncs>west update

C:\My_Designs\nRF Connect SDK\V_110\ncs>pip3 install -r zephyr\scripts\requirements.txt

C:\My_Designs\nRF Connect SDK\V_110\ncs>pip3 install -r nrf\scripts\requirements.txt

C:\My_Designs\nRF Connect SDK\V_110\ncs>pip3 install -r mcuboot\scripts\requirements.txt

NOT any warning at all this time, still got same error when tried Open Project in new SDK folder nRF Connect SDK\V_110\ncs\nrf\applications\asset_tracker

Thanks,

Bertie

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

Martin Lesund — Wed, 08 Jan 2020 09:15:05 GMT

Hi Bertiew,

It looks like there may be two issues in your setup.

1).

You are using a too old version of 'nrfjprog'.
Please download the latest one

2).
It looks like you are using a version of Python that may not be supported in the toolchain yet.
From the "Getting Started Assistant" you install Python 3.7.1 with the command 'choco install python', but you may already have python v3.8.1 installed?

So let's check which version of python you have in the command line: 'python --version'

You can also check if you have several versions installed on your computer by: 'where python'

So if you have something else than "Python37" at the top path please change this in your "Environment Variables". (System properties --> Environment Variables):

After you have done that, please try to install the required Python modules:

cd <sourcecode_root>\ncs
pip3 install -r zephyr\scripts\requirements.txt
pip3 install -r nrf\scripts\requirements.txt
pip3 install -r mcuboot\scripts\requirements.txt

Please let me know how it goes.

Best regards,

Martin L.

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

bertiew — Tue, 07 Jan 2020 14:30:51 GMT

Hi Martin,

Thanks for your reply,

I did "west update" as :

C:\My_Designs\nRF Connect SDK\V1_1_0\ncs>west init -m github.com/.../fw-nrfconnect-nrf --mr v1.1.0

C:\My_Designs\nRF Connect SDK\V1_1_0\ncs>west update

The three requirements were successfully installed, but notice "pip3 install -r nrf\scripts\requirements.txt" have two package ignored:

Ignoring pygit2: markers 'python_version < "3.8"' don't match your environment
Ignoring editdistance: markers 'python_version < "3.8"' don't match your environment

is it a problem?

The 'nrfjprog' version:

SES paths:

When open project, the path:

Please help and see what is wrong. Thank you.

RE: Segger Embedded Studio for RF9160 DK - solution load command failed (1)

Martin Lesund — Tue, 07 Jan 2020 13:07:28 GMT

Hi Bertie,
I want you to check some different things for me.

Did you do a "west update" after checking out tag v1.1.0?

e.g.

cd ncs/nrf
git checkout master
git pull
git checkout v1.1.0
west update

Make sure that the requirements are successfully installed:

cd <sourcecode_root>\ncs
pip3 install -r zephyr\scripts\requirements.txt
pip3 install -r nrf\scripts\requirements.txt
pip3 install -r mcuboot\scripts\requirements.txt

Please check the 'nrfjprog' version in the command line:

"nrfjprog -v"

Make sure these paths are correct:

Try to delete the build folder for asset_tracker and re-open the SES project.
Then double-check the correct paths when opening the project:

Best regards,

Martin L.