Starting up with the nRF-IEEE-802.15.4-radio-driver

RE: Starting up with the nRF-IEEE-802.15.4-radio-driver

Vidar Berg — Tue, 18 Feb 2020 08:09:30 GMT

I don't know what you have tried thus far, but I would start by going through the example documentation (link) to first get a quick overview of the sample. Next, I would try to get an understanding of the state machine (fsm.c) because it implements most of the application logic.

RE: Starting up with the nRF-IEEE-802.15.4-radio-driver

Lars-Christian — Tue, 18 Feb 2020 05:44:51 GMT

Hi Vidar,

I have explored the example "wireless_uart_raw", but I am having problems modifying it due to what is probably my incompetence (inexperience with nRF and Segger).

A little help with how to start up a project with the 802.15.4 MAC Library would be greatly appreciated.

RE: Starting up with the nRF-IEEE-802.15.4-radio-driver

Vidar Berg — Mon, 17 Feb 2020 14:39:47 GMT

Hi,

Unfortunately, as you have noticed, it will require a bit of manual work to create a SES project from this repo. Have you considered the pre-compiled 15.4 stack included in our nRF5 SDK as an option (IEEE 802.15.4 MAC library)?

I can try to help generate a project if you prefer using the driver.