Applications not running in non-secure

RE: Applications not running in non-secure

pascal_dao — Thu, 20 Feb 2020 16:05:19 GMT

Now I can't flash the thingy91. It throws this error

[1/9] Performing build step for 'spm_subimage'
ninja: no work to do.
-- west flash: using runner nrfjprog
-- runners.nrfjprog: Flashing file: /home/pascal/ncs/nrf/samples/nrf9160/mqtt_simple/build/zephyr/merged.hex
ERROR: JLinkARM DLL reported an error. Try again. If error condition
ERROR: persists, run the same command again with argument --log, contact Nordic
ERROR: Semiconductor and provide the generated log.log file to them.
ERROR: command exited with status 33: nrfjprog --program /home/pascal/ncs/nrf/samples/nrf9160/mqtt_simple/build/zephyr/merged.hex -f NRF91 --snr 801014545 --sectorerase

RE: Applications not running in non-secure

pascal_dao — Thu, 20 Feb 2020 15:34:17 GMT

Simon,

That seems to have fixed it, but only when using SES. When I use west in the terminal still nothing shows on the serial terminal. What might be the reason for this?

Regards

RE: Applications not running in non-secure

Simon — Thu, 20 Feb 2020 13:21:33 GMT

Try running nrfjprog --eraseall and see if that resolves your problem.

Best regards,

Simon

RE: Applications not running in non-secure

pascal_dao — Wed, 19 Feb 2020 19:30:36 GMT

Update:

I tried building and flashing from SES, and now this is what shows on the serial port:

It's printing this infinitely. It looks as if the device is rebooting non-stop.