RE: My Board does not start any connections with LWM2M_Client example

Heidi — Fri, 24 Apr 2020 12:30:39 GMT

That's good to hear! I will close this case now.

RE: My Board does not start any connections with LWM2M_Client example

Remo94 — Fri, 24 Apr 2020 11:08:43 GMT

Yes I did everything like it was stated there. I did now delete everything from my board and deleted the samples. Installed the firmware again and build the client with the needed changes and it worked now. I honestly don't know where the problem was but there was no sign that the client is actually doing something and now I do get the connection.

Thank you for your time!

RE: My Board does not start any connections with LWM2M_Client example

Heidi — Wed, 22 Apr 2020 09:25:22 GMT

I see you have enabled DTLS support. Did you configure the LwM2M server correctly according to the documentation here?

RE: My Board does not start any connections with LWM2M_Client example

Remo94 — Mon, 20 Apr 2020 14:56:22 GMT

Yes I tried the asset tracker sample and I do get and IP and a connection to a network.

Here is my prj.conf file:

# General config
CONFIG_NEWLIB_LIBC=y
CONFIG_ASSERT=y
CONFIG_REBOOT=y

# Network
CONFIG_NETWORKING=y
CONFIG_NET_NATIVE=n
CONFIG_NET_IPV6=n
CONFIG_NET_IPV4=y
CONFIG_NET_SOCKETS=y
CONFIG_NET_SOCKETS_OFFLOAD=y
CONFIG_GPIO=y
CONFIG_HEAP_MEM_POOL_SIZE=4096
CONFIG_MAIN_STACK_SIZE=4096

# CMD 26.3.2020
CONFIG_AT_HOST_LIBRARY=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_LTE_NETWORK_MODE_NBIOT=y
CONFIG_LTE_NETWORK_MODE_LTE_M=n

# LwM2M
CONFIG_LWM2M=y
CONFIG_LWM2M_DNS_SUPPORT=y
CONFIG_LWM2M_RW_JSON_SUPPORT=n
CONFIG_LWM2M_SERVER_DEFAULT_PMIN=1
CONFIG_LWM2M_SERVER_DEFAULT_PMAX=300
CONFIG_LWM2M_CONN_MON_OBJ_SUPPORT=y
CONFIG_LWM2M_CONN_MON_BEARER_MAX=2
CONFIG_LWM2M_FIRMWARE_UPDATE_OBJ_SUPPORT=y
CONFIG_LWM2M_LOCATION_OBJ_SUPPORT=y
CONFIG_LWM2M_IPSO_SUPPORT=y
CONFIG_LWM2M_IPSO_TEMP_SENSOR=y
CONFIG_LWM2M_IPSO_LIGHT_CONTROL=y
CONFIG_LWM2M_IPSO_BUZZER=y
CONFIG_LWM2M_IPSO_ONOFF_SWITCH=y
CONFIG_LWM2M_IPSO_ONOFF_SWITCH_INSTANCE_COUNT=2
CONFIG_LWM2M_IPSO_PUSH_BUTTON=y
CONFIG_LWM2M_IPSO_PUSH_BUTTON_INSTANCE_COUNT=2
CONFIG_LWM2M_IPSO_ACCELEROMETER=y
CONFIG_LWM2M_IPSO_TIMESTAMP_EXTENSIONS=y

# DTLS settings
CONFIG_LWM2M_DTLS_SUPPORT=y
CONFIG_LWM2M_PEER_PORT=5684

# nRF9160 helper libraries
CONFIG_MODEM_KEY_MGMT=y

# Default app to debug logging
CONFIG_LOG=y
CONFIG_APP_LOG_LEVEL_DBG=y

# Expand logging memory to avoid log_strdup() errors
CONFIG_LOG_STRDUP_MAX_STRING=64
CONFIG_LOG_STRDUP_BUF_COUNT=32

# Support HEX style PSK values (double the size + NULL char)
CONFIG_LWM2M_SECURITY_KEY_SIZE=33

# extend CoAP retry timing to 10 seconds for LTE/LTE-M
CONFIG_COAP_INIT_ACK_TIMEOUT_MS=10000

# UI settings
CONFIG_UI_BUTTON=y
CONFIG_UI_BUZZER=y

# FOTA
CONFIG_BOOTLOADER_MCUBOOT=y
CONFIG_IMG_MANAGER=y
CONFIG_MCUBOOT_IMG_MANAGER=y
CONFIG_IMG_ERASE_PROGRESSIVELY=y
CONFIG_FLASH=y
CONFIG_MPU_ALLOW_FLASH_WRITE=y

# Enable temp sensor
CONFIG_SENSOR=y
# TODO: No DIE temp sensor on nRF9150, select a temp sensor?
# CONFIG_TEMP_NRF5=y

# Enable settings storage
CONFIG_SETTINGS=y
CONFIG_FCB=y
CONFIG_SETTINGS_FCB=y

# LTE link control
CONFIG_LTE_LINK_CONTROL=y
CONFIG_LTE_AUTO_INIT_AND_CONNECT=n

# BSD library
CONFIG_BSD_LIBRARY=y

# Modem info
CONFIG_MODEM_INFO=y
CONFIG_MODEM_INFO_ADD_DATE_TIME=n

# Library for buttons and LEDs
CONFIG_DK_LIBRARY=y
CONFIG_DK_LIBRARY_INVERT_LEDS=n

# Enable shell
CONFIG_NET_SHELL=y

# Heap and stacks
CONFIG_HEAP_MEM_POOL_SIZE=16384
CONFIG_MAIN_STACK_SIZE=8192
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
#CONFIG_HW_STACK_PROTECTION=y

# Set LwM2M Server IP address here
CONFIG_APP_LWM2M_SERVER="leshan.eclipseprojects.io"

RE: My Board does not start any connections with LWM2M_Client example

Heidi — Sun, 19 Apr 2020 13:04:25 GMT

Hi, we won't know what the problem is without some more information.

Have you tried and succeeded in connecting to nRF Cloud, with the Asset Tracker sample? (to confirm you are able to connect to a network).

Please also attach your prj.conf file so I can check your configurations.

Best regards,

Heidi