New Mesh SDK Default Lightness implementation

RE: New Mesh SDK Default Lightness implementation

Hung Bui — Mon, 04 May 2020 15:28:14 GMT

I'm quite new to the light lightness model, so my understanding could be wrong, but let's have a look at the spec:

If the Light lightness is 0x0000, the device should set the light lightness to "Light Lightness Last" value. This "Light Lightness Last" changed if there is a command that changes the value of the lightness.
My understanding is that, on the first ever reset, the light should be set to max brightness. If there is no command to change it to anything else and there is a reset, it should still be turn on at max brightness. But if before a reset, it receives a command to change the lightness to anything else (for example 20%), and then it get a reset, then it should set the light lightness to to this last known lightness (20%).

RE: New Mesh SDK Default Lightness implementation

DeveloperZ — Thu, 30 Apr 2020 16:03:12 GMT

Sorry, that was a mistake. It was 0x0. One of my teammates changed it.
But still the second question behavior is observed.
If we have default value for default lightness as 0x0, light is at max brightness, we provision the node, change the lightness level and reset it.

Shouldn't the reset force the device to go to maximum brightness? I see it is going to last known brightness.
If the last lightness before reset was 1%, the device is resetting to 1% lightness.

Thank you.

RE: New Mesh SDK Default Lightness implementation

Hung Bui — Thu, 30 Apr 2020 15:07:06 GMT

Hi,

Could you point me to the exact define you were looking at.
I'm looking at LIGHT_LIGHTNESS_DEFAULT_LIGHTNESS_DEFAULT defined in ligh_lightness_common.h and it's = 0x0.