Electrical signal linked to the push action

RE: Electrical signal linked to the push action

Beldramma — Thu, 28 May 2020 14:46:52 GMT

I think that it is that.

From the doc :

" The buttons are active low, meaning the input will be connected to ground when the button is activated. The buttons have no external pull-up resistor, so to use the buttons the P0.13–P0.16 pins must be configured as an input with an internal pull-up resistor. "

RE: Electrical signal linked to the push action

Beldramma — Thu, 28 May 2020 14:13:21 GMT

Hi Turbo J, thanks for you fast answer.

My BUTTONS_ACTIVE_STATE is at 1. So that mean that my push button is active when i come from low to high ?

Do you know where i can find this information?

RE: Electrical signal linked to the push action

Turbo J — Thu, 28 May 2020 13:44:59 GMT

[quote userid="90244" url="~/f/nordic-q-a/61922/electrical-signal-linked-to-the-push-action"] is it a up to down or down to up[/quote]

That is configurable in the board's header file: BUTTONS_ACTIVE_STATE

Edit: On the DKs, the buttons are usually active low.