How to recover my new Thingy91?

RE: How to recover my new Thingy91?

ReggieMax — Mon, 15 Jun 2020 18:25:01 GMT

That does work much better - thank you. The online instructions had led me to believe that only files from the "...images_full..." directory should be used. But now I see that maybe that applies only when using the debug probe. Probably a case of PEBCAK.

RE: How to recover my new Thingy91?

Martin Lesund — Mon, 15 Jun 2020 12:20:55 GMT

Hi Reggie,
You are not using the correct .hex file.

Please use the DFU file as I have mentioned in my two responses: thingy91_ltem_dfu_2020-04-29_bc7ade8b.hex

Found in: [images_dfu_hex/thingy91_ltem_dfu_2020-04-29_bc7ade8b.hex]

RE: How to recover my new Thingy91?

ReggieMax — Fri, 12 Jun 2020 22:09:27 GMT

I do not have a DK. According to the literature it is not required. I do have a 90's vintage JTAG programmer :-)

RE: How to recover my new Thingy91?

Martin Lesund — Fri, 12 Jun 2020 13:32:10 GMT

Hi Reggie,
What does the output log from the Programming app say after you have put the device in MCUboot mode (press inn the button on Thingy:91 when you turn on the device) and then try to flash the "thingy91_ltem_dfu_2020-04-29_bc7ade8b.hex"?
(please share the log or screenshot)

Do you have a nRF9160DK as well so you could utilize the "debug out" with a 10-pin connector and flash via that?
(or another external debugger)

RE: How to recover my new Thingy91?

ReggieMax — Mon, 08 Jun 2020 15:20:46 GMT

Thank you! As I described in my post I have already tried your exact instructions. Today I tried it again with v 3.4.0 of the nRF Connect App (still using USB) I still get the same results: no flashing LED and no response to AT commands.

Note that at the bottom of the Programming Modem Firmware instructions it states "If you want to verify that the update was successful, check the version of the modem firmware by running the AT command AT+CGMR (for example, in LTE Link Monitor)." This step does not work - also as reported before.

Also note that the Programming Application instructions are not clear about whether SW3 or SW2 should be pressed during power-up in order to load the images_full/thingy91_ltem_2020-04-29_bc7ade8b.hex application. I have been using SW3 as described in the other post that I referenced. (I have also tried the debug version.)

So what to try next?

RE: How to recover my new Thingy91?

Martin Lesund — Mon, 08 Jun 2020 14:04:57 GMT

Hi Reggie,

Could you verify that you followed the instructions in the documentation?

In the CONTENT.txt file in the .zip you have a description on which file to use depending on how you flash them:

Package contents:
images_full/          Full firmware images, updated over debug probe / development kit
images_dfu_hex/       Application images, updated over USB, HEX format
images_dfu_bin/       Application images, updated over USB, binary format

and you also have the description of the different files:

File                                                                              Description
--------------------------------------------------------------------------------  ------------------------------------------------------------------------
images_dfu_bin/debug/thingy91_ltem_dfu_debug_2020-04-29_bc7ade8b.bin              DEBUG Asset tracker firmware for nRF9160, LTE-M network mode
images_dfu_bin/debug/thingy91_nbiot_dfu_debug_2020-04-29_bc7ade8b.bin             DEBUG Asset tracker firmware for nRF9160, NB-IoT network mode
images_dfu_bin/debug/thingy91_nbiot_legacy_pco_dfu_debug_2020-04-29_bc7ade8b.bin  Asset tracker firmware for nRF9160, NB-IoT network mode, legacy PCO mode
images_dfu_bin/thingy91_at_client_dfu_2020-04-29_bc7ade8b.bin                     Firmware for direct modem communication
images_dfu_bin/thingy91_ltem_dfu_2020-04-29_bc7ade8b.bin                          Asset tracker firmware for nRF9160, LTE-M network mode
images_dfu_bin/thingy91_nbiot_dfu_2020-04-29_bc7ade8b.bin                         Asset tracker firmware for nRF9160, NB-IoT network mode
images_dfu_bin/thingy91_nbiot_legacy_pco_dfu_2020-04-29_bc7ade8b.bin              Asset tracker firmware for nRF9160, NB-IoT network mode, legacy PCO mode
images_dfu_bin/thingy91_nrf52_connectivity_bridge_dfu_2020-04-29_bc7ade8b.bin     Connectivity bridge for the nrf52
images_dfu_bin/thingy91_nrf52_usb_uart_bridge_dfu_2020-04-29_bc7ade8b.bin         USB-UART bridge for nRF52840 (deprecated)
images_dfu_hex/debug/thingy91_ltem_dfu_debug_2020-04-29_bc7ade8b.hex              DEBUG Asset tracker firmware for nRF9160, LTE-M network mode
images_dfu_hex/debug/thingy91_nbiot_dfu_debug_2020-04-29_bc7ade8b.hex             DEBUG Asset tracker firmware for nRF9160, NB-IoT network mode
images_dfu_hex/debug/thingy91_nbiot_legacy_pco_dfu_debug_2020-04-29_bc7ade8b.hex  Asset tracker firmware for nRF9160, NB-IoT network mode, legacy PCO mode
images_dfu_hex/thingy91_at_client_dfu_2020-04-29_bc7ade8b.hex                     Firmware for direct modem communication
images_dfu_hex/thingy91_ltem_dfu_2020-04-29_bc7ade8b.hex                          Asset tracker firmware for nRF9160, LTE-M network mode
images_dfu_hex/thingy91_nbiot_dfu_2020-04-29_bc7ade8b.hex                         Asset tracker firmware for nRF9160, NB-IoT network mode
images_dfu_hex/thingy91_nbiot_legacy_pco_dfu_2020-04-29_bc7ade8b.hex              Asset tracker firmware for nRF9160, NB-IoT network mode, legacy PCO mode
images_dfu_hex/thingy91_nrf52_connectivity_bridge_dfu_2020-04-29_bc7ade8b.hex     Connectivity bridge for the nrf52
images_dfu_hex/thingy91_nrf52_usb_uart_bridge_dfu_2020-04-29_bc7ade8b.hex         USB-UART bridge for nRF52840 (deprecated)
images_full/debug/thingy91_ltem_debug_2020-04-29_bc7ade8b.hex                     DEBUG Asset tracker firmware for nRF9160, LTE-M network mode
images_full/debug/thingy91_nbiot_debug_2020-04-29_bc7ade8b_debug.hex              DEBUG Asset tracker firmware for nRF9160, NB-IoT network mode
images_full/debug/thingy91_nbiot_legacy_pco_debug_2020-04-29_bc7ade8b.hex         Asset tracker firmware for nRF9160, NB-IoT network mode, legacy PCO mode
images_full/thingy91_at_client_2020-04-29_bc7ade8b.hex                            Firmware for direct modem communication
images_full/thingy91_ltem_2020-04-29_bc7ade8b.hex                                 Asset tracker firmware for nRF9160, LTE-M network mode
images_full/thingy91_nbiot_2020-04-29_bc7ade8b.hex                                Asset tracker firmware for nRF9160, NB-IoT network mode
images_full/thingy91_nbiot_legacy_pco_2020-04-29_bc7ade8b.hex                     Asset tracker firmware for nRF9160, NB-IoT network mode, legacy PCO mode
images_full/thingy91_nrf52_connectivity_bridge_2020-04-29_bc7ade8b.hex            Connectivity bridge for the nrf52
images_full/thingy91_nrf52_usb_uart_bridge_2020-04-29_bc7ade8b.hex                USB-UART bridge for nRF52840 (deprecated)
mfwnrf9160120.zip                                                                 Modem firmware, updated through nRF Connect for Desktop

For the "out of the box" application, it's the Asset_tracker sample.
So you would need to select the version that suits which network technology you are going to connect to.
e.g. for LTE-M you select

thingy91_ltem_dfu_2020-04-29_bc7ade8b.hex                          Asset tracker firmware for nRF9160, LTE-M network mode

BR,
martin l.