Failed to connect to cloud, error -7

RE: Failed to connect to cloud, error -7

Heidi — Mon, 20 Jul 2020 14:16:51 GMT

Hi!

Both the traces you attached were empty. When you take a trace, please make sure that the file size is increasing as the application is running, see the red square below.

RE: Failed to connect to cloud, error -7

Edvin — Fri, 10 Jul 2020 12:43:09 GMT

Thank you,

I have forwarded the traces to the nRF91 modem team. I will let you know when I know more.

BR,

Edvin

RE: Failed to connect to cloud, error -7

xinjiang — Fri, 10 Jul 2020 07:16:52 GMT

Hi,

I tracked it twice.

devzone.nordicsemi.com/.../trace_2D00_2020_2D00_07_2D00_10T07_2D00_22_2D00_41.729Z.bin

devzone.nordicsemi.com/.../trace_2D00_2020_2D00_07_2D00_10T07_2D00_26_2D00_56.784Z.bin

RE: Failed to connect to cloud, error -7

Edvin — Thu, 09 Jul 2020 12:51:37 GMT

Hello,
Can you please try to capture a modem trace? You can capture a modem trace by following this guide:
https://devzone.nordicsemi.com/nordic/cellular-iot-guides/b/getting-started-cellular/posts/how-to-get-modem-trace-using-trace-collector-in-nrf-connect

And I will send it to our modem and cloud team. Perhaps they can see what's going on, and why it doesn't connect.

Best regards,

Edvin

RE: Failed to connect to cloud, error -7

xinjiang — Thu, 09 Jul 2020 09:12:22 GMT

Hi,

I have renewed my certificate again.

I'm in Shenzhen, China. Only NB-IOT is supported here. Here is my prj.conf.

#
# Copyright (c) 2019 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-BSD-5-Clause-Nordic
#
# General config
CONFIG_NEWLIB_LIBC=y
CONFIG_NEWLIB_LIBC_FLOAT_PRINTF=y
CONFIG_ASSERT=y
CONFIG_REBOOT=y
CONFIG_LOG=y
CONFIG_LOG_IMMEDIATE=y

# Network
CONFIG_NETWORKING=y
CONFIG_NET_NATIVE=n
CONFIG_NET_SOCKETS=y
CONFIG_NET_SOCKETS_OFFLOAD=y

# LTE link control
CONFIG_POWER_OPTIMIZATION_ENABLE=n
CONFIG_LTE_LINK_CONTROL=y
#CONFIG_LTE_NETWORK_MODE_LTE_M_GPS=y
CONFIG_LTE_AUTO_INIT_AND_CONNECT=n
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL_DBG=y

CONFIG_LTE_NETWORK_MODE_NBIOT_GPS=y
CONFIG_LTE_LEGACY_PCO_MODE=y
CONFIG_LTE_PSM_REQ_RPTAU="00000110"
CONFIG_LTE_PSM_REQ_RAT="00000010"

# Modem info
CONFIG_MODEM_INFO=y

# BSD library
CONFIG_BSD_LIBRARY=y
CONFIG_BSD_LIBRARY_TRACE_ENABLED=n

# nRF Cloud
CONFIG_CLOUD_API=y
CONFIG_NRF_CLOUD=y
CONFIG_NRF_CLOUD_LOG_LEVEL_DBG=y
CONFIG_NRF_CLOUD_AGPS=y
CONFIG_NRF_CLOUD_CONNECTION_POLL_THREAD=y
CONFIG_NRF_CLOUD_NONBLOCKING_SEND=y
# Needed for the cloud codec
CONFIG_CJSON_LIB=y
# Shorter to prevent NAT timeouts
CONFIG_MQTT_KEEPALIVE=120
# Don't resubscribe to topics if broker remembers them
CONFIG_CLOUD_PERSISTENT_SESSIONS=y

# Sensors
CONFIG_ACCEL_USE_SIM=y
CONFIG_TEMP_USE_SIM=y
CONFIG_CLOUD_BUTTON=n

# GPS
CONFIG_NRF9160_GPS=y
# CONFIG_GPS_USE_SIM=y
CONFIG_NRF9160_GPS_LOG_LEVEL_DBG=y
CONFIG_GPS_USE_EXTERNAL=y
CONFIG_GPS_DEV_NAME="NRF9160_GPS"
CONFIG_GPS_CONTROL_PSM_ENABLE_ON_START=y

CONFIG_GPS_CONTROL_FIRST_FIX_CHECK_DELAY=10
CONFIG_GPS_CONTROL_FIX_CHECK_INTERVAL=30
CONFIG_GPS_CONTROL_FIX_TRY_TIME=360
CONFIG_GPS_CONTROL_PSM_DISABLE_ON_STOP=n

# Library for buttons and LEDs
CONFIG_DK_LIBRARY=y
CONFIG_DK_LIBRARY_INVERT_LEDS=n

# Console
CONFIG_CONSOLE_SUBSYS=y
CONFIG_CONSOLE_HANDLER=y
CONFIG_CONSOLE_GETCHAR=y

# Heap and stacks
CONFIG_HEAP_MEM_POOL_SIZE=16384
CONFIG_MAIN_STACK_SIZE=8192
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
CONFIG_HW_STACK_PROTECTION=y

# MCUBOOT
CONFIG_BOOTLOADER_MCUBOOT=y
CONFIG_IMG_MANAGER=y
CONFIG_MCUBOOT_IMG_MANAGER=y

# Flash
CONFIG_FLASH=y
CONFIG_IMG_ERASE_PROGRESSIVELY=y

# AWS FOTA
CONFIG_AWS_FOTA=y
CONFIG_FOTA_DOWNLOAD=y
CONFIG_AWS_FOTA_LOG_LEVEL_DBG=y
CONFIG_AWS_JOBS_LOG_LEVEL_DBG=y
CONFIG_DFU_TARGET=y

# Download client (needed by AWS FOTA)
CONFIG_DOWNLOAD_CLIENT=y
CONFIG_DOWNLOAD_CLIENT_STACK_SIZE=4096

# Fatal error
CONFIG_RESET_ON_FATAL_ERROR=n
CONFIG_WATCHDOG=y

This error just happened again. Especially in the afternoon, it happens a lot and the connection is slow. It's about morning in the Nordic. Is there something wrong with the cloud?

RE: Failed to connect to cloud, error -7

Edvin — Thu, 09 Jul 2020 06:45:36 GMT

Hello,

So the issue is that the key is invalid.

Have you tried to follow this guide:
https://devzone.nordicsemi.com/nordic/cellular-iot-guides/b/getting-started-cellular/posts/nrf-cloud-certificate-update

Perhaps you have invalid certificates, which could lead to error -7.

Does the issue occur even if you revert the changes to the prj.conf, and disable NB-IoT?

Best regards,

Edvin

RE: Failed to connect to cloud, error -7

Edvin — Tue, 07 Jul 2020 16:01:21 GMT

Hello,

I am sorry for the late reply, but due to low staffing in R&D and Tech.support, we are having trouble answering all incoming questions. Unfortunately, I don't know how to approach the issue that you describe. I will try to reach out for the right people tomorrow.

Best regards,

Edvin

RE: Failed to connect to cloud, error -7

xinjiang — Fri, 03 Jul 2020 12:14:00 GMT

I didn't make any changes to the example.I just modified prj.conf to support NB-iot.

After constant testing, found that sometimes connected and sometimes not connected.This is also the case with NCS1.2.0.

RE: Failed to connect to cloud, error -7

Simonr — Fri, 03 Jul 2020 12:05:14 GMT

Probably a stupid question, but have you ensured that your private key is valid? Did you make any changes from yesterday before running into this error? The error "-7" should only be caused by your private key not being valid.

Best regards,

Simon