Using a Segger JLink Pro Ethernet connection with nrfjprog

RE: Using a Segger JLink Pro Ethernet connection with nrfjprog

Kenneth — Mon, 01 Feb 2021 17:23:56 GMT

Not sure if I have the details, but you may find this case and documentation useful:

https://devzone.nordicsemi.com/f/nordic-q-a/33911/what-are-the-raw-jlink-exe-commands-sent-by-nrfjprog-exe
https://devzone.nordicsemi.com/f/nordic-q-a/64566/failure-to-eraseall-via-nvmc-access-from-segger-jlink
https://infocenter.nordicsemi.com/topic/nwp_027/WP/nwp_027/intro.html

Kenneth

RE: Using a Segger JLink Pro Ethernet connection with nrfjprog

MarkDickson — Mon, 01 Feb 2021 15:22:10 GMT

Hello,

Since nrfjprog.exe does not support the Segger Ethernet interface, I need to translate the following commands so I can use the Segger flash tools to program our parts. Can you please provide this translation?

nrfjprog.exe –recover

nrfjprog.exe --family NRF52 --program MyFIle.hex –chiperase

nrfjprog.exe --family NRF52 –reset

RE: Using a Segger JLink Pro Ethernet connection with nrfjprog

haakonsh — Thu, 13 Aug 2020 09:02:07 GMT

I'm not sure if nrfjprog supports ethernet out of the box.

Have you configured the J-link according to chapter 6.3 "Setting up the IP interface" in the JLink User Guide?

RE: Using a Segger JLink Pro Ethernet connection with nrfjprog

MarkDickson — Wed, 12 Aug 2020 15:57:45 GMT