nRF Connect Desktop doesn't recognize nRF52840 dongle

RE: nRF Connect Desktop doesn't recognize nRF52840 dongle

Allen Jameson — Thu, 15 Oct 2020 23:14:15 GMT

@Dabbler thank you for posting your solution. I had recently installed NZXT Cam to try to debug some PC power issues, and had no inkling at all that this could be why NRF Connect was no longer working for me.

RE: nRF Connect Desktop doesn't recognize nRF52840 dongle

Dabbler — Fri, 25 Sep 2020 12:35:49 GMT

Problem solved!
One of my startup application which monitor PC performance called "NZXT Cam" was blocking the serial port of my nrf dongle.

When I close this application, nRF Connect always recognize the dongle even after connection/disconnection cycle.

Thank you very much for your kind help.

RE: nRF Connect Desktop doesn't recognize nRF52840 dongle

Dabbler — Fri, 25 Sep 2020 03:21:02 GMT

Kenneth Thank you.

I tried everything, but no success.

- remove and reinstall nrfConnect

- launch nrf connect with admin provileges

- confirm no other application use this port

- connect dongle in different available USB port

One thing I found was that once I reboot the PC while keep connecting dongle to USB port, the dongle was recognized successfully and BLE scan was correctly executed.

And, I could just repeat close and reopen as long as the dongle staying in the port.

However, once the dongle is unplugged from the USB port, it cannot be opened again with the error message above, even if I plug it in the USB port again.

In this case, is the USB disconnection process not working properly? Or is there some hidden process blocking it?

Attached is the driver applied to my dongle.

Sorry, if this could be no more nordic related issue, I have to find the another solution.

Your suggestions are welcome.

RE: nRF Connect Desktop doesn't recognize nRF52840 dongle

Kenneth — Thu, 24 Sep 2020 18:53:12 GMT

Sorry no really, it is the "classic" try restart, re-install, make sure you have admin privileges and no other terminal software is trying to acquire the serial port.

RE: nRF Connect Desktop doesn't recognize nRF52840 dongle

Dabbler — Thu, 24 Sep 2020 14:57:39 GMT

Thanks.

Confirmed that pressing RESET button put the device in DFU mode.

But, I would like to use the dongle in default FW as a central scanner in Bluetooth Low Energy app in nRF Connect.

And, I found that this dongle can be recognized successfully in the other PC with nRF Connect.

So, it is not the issue of dongle hardware, but seems to be PC related issue.

Any help would be appreciated.

RE: nRF Connect Desktop doesn't recognize nRF52840 dongle

Kenneth — Thu, 24 Sep 2020 11:10:30 GMT

Hi,

Can you check out:
https://devzone.nordicsemi.com/nordic/short-range-guides/b/getting-started/posts/nrf52840-dongle-programming-tutorial

"The DFU Trigger library can be included in an application to allow the USB host to put the nRF52840 Dongle in DFU mode. This is for instance used in the Connectivity firmware that is used by the nRF Connect BLE app. Most SDK example applications do not include this library, and in that case, the dongle must be put in DFU mode by pressing the RESET button."

Can you try to press the RESET button to check if that trigger nRF Connect to update the dongle?

Best regards,
Kenneth