nRFcloud could not get the locations from thingy 91

RE: nRFcloud could not get the locations from thingy 91

Martin Lesund — Wed, 07 Oct 2020 10:06:06 GMT

Hi Rkidechaa,

Awesome!
Thank you very much for describing on how you solved the issue as well.

best regards,
Martin L.

RE: nRFcloud could not get the locations from thingy 91

Rkidechaa — Wed, 07 Oct 2020 00:27:49 GMT

Thank you for asking martin.

I solved the problem by myself only.

The problem was I soldered the SB5 pad which was connecting the INT2 pin of ADXL372 to P0.10 pin of nRF9160.I guess this pin is not used in precompiled code (thingy91_ltem_dfu_2020-04-29_bc7ade8b) which might be the reason.

Thanks you.

RE: nRFcloud could not get the locations from thingy 91

Martin Lesund — Tue, 06 Oct 2020 08:53:11 GMT

Hi Rkidechaa,
So I assume you successfully went through all the steps shown here.

So you where able to get GPS data before?

Are you outside when testing the GPS? (holding in the button ~10sec to enable GPS)

Are you using LTE-M or NB-IoT?

Please connect the thingy:91 to a PC and send me the serial output log so we could see whats going on in the application.

Best regards,
martin L.