nrf9160 Sending data in DRX mode, about the current release time after sending the datahttps://devzone.nordicsemi.com/f/nordic-q-a/67054/nrf9160-sending-data-in-drx-mode-about-the-current-release-time-after-sending-the-dataThe device uses DRX mode Is China Mobile NB card At present, there is no downlink data after sending the data, and there is still a paging window about 25s. This paging window should be the duration of the inactivationen-USTelligent Community 13Tue, 13 Oct 2020 12:55:06 GMTRE: nrf9160 Sending data in DRX mode, about the current release time after sending the datahttps://devzone.nordicsemi.com/thread/274655?ContentTypeID=1Tue, 13 Oct 2020 12:55:06 GMT137ad170-7792-4731-bb38-c0d22fbe4515:78a8ee67-b32d-4fea-835f-a50661a6e181Stian R&#248;ed Hafskjold<p>Hi, so I&nbsp; assume that what we are seeing here is the device being in RRC connected mode, waiting for the RRC inactivity timer to run out. RRC inactivity timer is set to 25 seconds, and the network is not supporting DRX in RRC connected mode (or that the DRX interval is shorter than the measuring device resolution). Hence, the 25 second continuous RX (very sort RX interval) @ 30mA.</p> <p>The nRF91 supports Release assistant information, meaning the nRF91 can request the network to release the connection after data has been transmitted. The AT command to do this is documented here: <a href="https://infocenter.nordicsemi.com/topic/ref_at_commands/REF/at_commands/nw_service/xrai_set.html?cp=2_1_7_12_0">https://infocenter.nordicsemi.com/topic/ref_at_commands/REF/at_commands/nw_service/xrai_set.html?cp=2_1_7_12_0</a></p><div style="clear:both;"></div>