Migrating to S110 v8

RE: Migrating to S110 v8

Susheel Nuguru — Mon, 27 Apr 2015 07:20:09 GMT

What do you mean with S110 v8 is not working, does you code start? If you put a breakpoint in Reset_handler function in arm_startup_nrf51.s file and see if your PC(program counter) reaches there, then that means that your settings are working.

RE: Migrating to S110 v8

Nguyen Hoan Hoang — Fri, 24 Apr 2015 19:47:46 GMT

In that case, only thing left to do is to place breakpoint in the reset function to see if it breaks there and start tracing. I got the SD8 working on rev1 of the chip. There must be something missing. Also trace the softdevince init function. Do you have DFU flashed in previously ?

RE: Migrating to S110 v8

Anshul — Fri, 24 Apr 2015 19:41:41 GMT

I actually made all the changes that are listed in this blog. I followed the migration document and made all the changes, else the code would not even compile.

RE: Migrating to S110 v8

Nguyen Hoan Hoang — Fri, 24 Apr 2015 19:36:49 GMT

The start address and size are correct. There are other little modifications that are required, see this blog.