RE: Multilink Central connection problems : 0x3e (BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED)

jswcomkr — Tue, 20 Oct 2020 19:57:13 GMT

SOLVED!

As your advice, I add connection paramters and scan paramters.

Here is new code that can solve the problems.

// 스캔 파라미터 설정
	scan_params.interval = 1600;
	scan_params.window = 320;
	scan_params.timeout = 500;
	scan_params.active = true;
	scan_params.filter_policy = BLE_GAP_SCAN_FP_ACCEPT_ALL;

	// 연결 파라미터 설정
	conn_params.min_conn_interval = 16;			// 7.5ms
	conn_params.max_conn_interval = 32;			// 7.5ms
	conn_params.slave_latency     = 0;			// No latency
	conn_params.conn_sup_timeout  = 500;		// 5000ms

	init_scan.connect_if_match = true;				// 조건 만족 시 연결 기능 True
	init_scan.p_scan_param = &scan_params;
	init_scan.conn_cfg_tag = CONN_CFG_TAG;	// Connection Tag
	init_scan.p_conn_param = &conn_params;

RE: Multilink Central connection problems : 0x3e (BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED)

jswcomkr — Tue, 20 Oct 2020 18:26:05 GMT

/*
 *  Roverdyn BluetoothLE Library
 *
 *  Created on: 2020. 8. 23
 *  Author: Seonguk Jeong
 *  Company : Roverdyn Inc.
 *  Copyright(c) 2020. Roverdyn Inc. all right reserved
 *
 *  Version : 2.0
 *  Last updated : 2020. 9. 10.
 */

#include "BluetoothLE.h"
// Static member variable 珥덇린�솕
uint16_t _BLE::h_connection = BLE_CONN_HANDLE_INVALID;
uint32_t _BLE::err_code = 0;
uint16_t _BLE::m_ble_nus_max_data_len = 247;
uint8_t _BLE::device_num = 7;
bool _BLE::isConnect = false;
char _BLE::rx_buffer[256] = {0};
char _BLE::tx_buffer[256] = {0};
extern void BluetoothLE_Conn_Handler(bool isConnect);
extern void BluetoothLE_RecvHandler(uint8_t *data, uint16_t length);

static ble_uuid_t const uuids =
{
    .uuid = BLE_UUID_NUS_SERVICE,
    .type = BLE_UUID_TYPE_VENDOR_BEGIN
};

void _BLE::initPheriperal(char *dev_name){
	// App Timer 모듈 초기화
	err_code = app_timer_init();
	err_code = sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE);
	APP_ERROR_CHECK(err_code);

    // Softdevice 및 BLE 스택 활성화
	initBLEStack();

    // GAP, GATT 초기화
	initGAP(dev_name);
	initGATT(PHERIPERAL);

    // Nordic UART Service (NUS) 활성화
	initService();

    // Adertising 모듈 초기화
	APP_ERROR_CHECK(err_code);
    initAdv();

    // 연결 매개변수 초기화
    initConnParams();
    err_code = sd_ble_gap_tx_power_set (BLE_GAP_TX_POWER_ROLE_ADV , h_connection, 4);
    APP_ERROR_CHECK(err_code);

    // Advertising 시작
    err_code = ble_advertising_start(&advertising, BLE_ADV_MODE_FAST);
}

void _BLE::initCentral(){
	// BLE Central 초기화 함수
	// Softdevice 및 BLE 스택 활성화
	SEGGER_RTT_printf(0, "TEST\n");
	initBLEStack();

	// DCDC 모드 설정
	err_code = sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE);
	APP_ERROR_CHECK(err_code);

	// GATT 클라이언트 초기화
	initGATT(CENTRAL);

	// DB Discovery 모듈 활성화
	initDiscovery();

	// NUS Central 모듈 초기화
	initNUSC();

	// BLE connection state
	ble_conn_state_init();

	// Scan 모듈 초기화
	initScan();

	err_code = sd_ble_gap_tx_power_set (BLE_GAP_TX_POWER_ROLE_SCAN_INIT  , h_connection, 4);
	APP_ERROR_CHECK(err_code);
}

void _BLE::startScan(){
	ret_code_t ret;
	ret = nrf_ble_scan_start(&m_scan);
	APP_ERROR_CHECK(ret);
}

void _BLE::stopScan(){
	nrf_ble_scan_stop();
}

void _BLE::initBLEStack(){
	// BLE 스택 초기화 함수
    // Softdevice 활성화
    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // BLE 스택 기본 설정
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // BLE 스택 활성화
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // BLE Observer 설정
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}

void _BLE::initGAP(char *dev_name){
	// 援ъ“泥� 珥덇린�솕
    ble_gap_conn_params_t gap_conn_params;	// GAP �뿰寃� �뙆�씪誘명꽣
    ble_gap_conn_sec_mode_t sec_mode;		// Security 紐⑤뱶 �꽕�젙
    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    // 蹂댁븞 紐⑤뱶 �꽕�젙(OPEN)
    sec_mode.sm = 1;
    sec_mode.lv = 1;

    // Softdevice�뿉 �뵒諛붿씠�뒪 �씠由� Update
    ble_gap_addr_t gap_addr;
    err_code = sd_ble_gap_addr_get(&gap_addr);
    sprintf(dev_name, "%s-%02X%02X", dev_name, gap_addr.addr[1], gap_addr.addr[0]);
    err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)dev_name, strlen(dev_name));

    // GAP �뿰寃� �뙆�씪誘명꽣 �꽕�젙
    gap_conn_params.min_conn_interval = 8;			// 7.5ms
    gap_conn_params.max_conn_interval = 16;			// 7.5ms
    gap_conn_params.slave_latency     = 0;			// No latency
    gap_conn_params.conn_sup_timeout  = 500;		// 5000ms

    // PPCP 파라미터 업데이트
    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
}

void _BLE::initGATT(bool mode){
	 // GATT 서버/클라이어트 초기화
	err_code = nrf_ble_gatt_init(&gatt, gatt_evt_handler);
	APP_ERROR_CHECK(err_code);

	 // MTU Size 설정
	 if(mode){
		 err_code = nrf_ble_gatt_att_mtu_central_set(&gatt, 247);
		 APP_ERROR_CHECK(err_code);
	 }else{
		 err_code = nrf_ble_gatt_att_mtu_periph_set(&gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
		 APP_ERROR_CHECK(err_code);
	 }
}

void _BLE::initService(){
	// Nordic UART 諛� QWR 紐⑤뱢 珥덇린�솕 �븿�닔
	// 援ъ“泥� �꽑�뼵 諛� 珥덇린�솕
    ble_nus_init_t nus_init;
    nrf_ble_qwr_init_t qwr_init;
    memset(&nus_init, 0, sizeof(nus_init));
    memset(&qwr_init, 0, sizeof(qwr_init));

    // QWR紐⑤뱢 �삤瑜� �빖�뱾�윭 吏��젙
    // QWR 紐⑤뱢 珥덇린�솕
    qwr_init.error_handler = nrf_qwr_error_handler;
    err_code = nrf_ble_qwr_init(&qwr, &qwr_init);

    // Noridc UART �꽌鍮꾩뒪 珥덇린�솕
    // �뜲�씠�꽣 �빖�뱾�윭 吏��젙
    nus_init.data_handler = nus_data_handler;
    err_code = ble_nus_init(&nus, &nus_init);
}

void _BLE::initAdv(){
	// Advertising 珥덇린�솕 �븿�닔
	// 珥덇린�솕 援ъ“泥� �꽑�뼵
	static ble_advertising_init_t adv_params;
    memset(&adv_params, 0, sizeof(adv_params));

    // Advertising Data Packet �꽕�젙
    int8_t tx_power = 4;
    adv_params.advdata.name_type = BLE_ADVDATA_FULL_NAME;
    adv_params.advdata.include_appearance = false;
    adv_params.advdata.p_tx_power_level = &tx_power;
    adv_params.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;

    // Scan Response Data �꽕�젙
    // UUID �꽕�젙
    adv_params.srdata.uuids_complete.uuid_cnt = 1;
    adv_params.srdata.uuids_complete.p_uuids = (ble_uuid_t *)&uuids;

    // �뿰寃곗뿉 愿��븳 Advertising �뙆�씪誘명꽣 �꽕�젙
    adv_params.config.ble_adv_fast_enabled = true;
    adv_params.config.ble_adv_fast_interval = 64;
    adv_params.config.ble_adv_fast_timeout = 0;
    adv_params.evt_handler = on_adv_evt;

    // Advertising 珥덇린�솕
    err_code = ble_advertising_init(&advertising, &adv_params);

    // �뿰寃� �꽕�젙 媛깆떊
    ble_advertising_conn_cfg_tag_set(&advertising, CONN_CFG_TAG);
}

void _BLE::initNUSC(){
	// Nordic UART Service Client 초기화
	ret_code_t       err_code;
	ble_nus_c_init_t init;

	init.evt_handler   = ble_nus_c_evt_handler;
	init.error_handler = nus_error_handler;
	init.p_gatt_queue  = &m_ble_gatt_queue;

	for (uint8_t i = 0; i < NRF_SDH_BLE_CENTRAL_LINK_COUNT; i++){
		err_code = ble_nus_c_init(&m_nus_c_multi[i], &init);
		APP_ERROR_CHECK(err_code);
	}
}

void _BLE::initScan(){
	// BLE 스캐닝 모듈 초기화
	ret_code_t err_code;

	// 스캐닝 구조체
	nrf_ble_scan_init_t init_scan;
	memset(&init_scan, 0, sizeof(init_scan));

	// 스캔 모듈 설정
	init_scan.connect_if_match = true;				// 조건 만족 시 연결 기능 True
	init_scan.conn_cfg_tag = CONN_CFG_TAG;	// Connection Tag

	// Scan Initialization
	err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);
	APP_ERROR_CHECK(err_code);

	// 필터 설정
	err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_UUID_FILTER, &uuids);
	APP_ERROR_CHECK(err_code);

	// 필터 활성화
	err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_UUID_FILTER, false);
	APP_ERROR_CHECK(err_code);
}

void _BLE::initDiscovery(){
	// Database Discovery 초기화
	// DB Discovery 구조체 선언
    ble_db_discovery_init_t db_init;
    memset(&db_init, 0, sizeof(ble_db_discovery_init_t));

    db_init.evt_handler  = db_disc_handler;
    db_init.p_gatt_queue = &m_ble_gatt_queue;

    ret_code_t err_code = ble_db_discovery_init(&db_init);
    APP_ERROR_CHECK(err_code);
}

void _BLE::initConnParams(){
	// �뿰寃� �뙆�씪誘명꽣 �꽕�젙 �븿�닔
	// �뙆�씪誘명꽣 援ъ“泥� �꽑�뼵
    ble_conn_params_init_t cp_init;
    memset(&cp_init, 0, sizeof(cp_init));

    // �뿰寃� �뙆�씪誘명꽣 �뜲�씠�꽣 �꽕�젙
    cp_init.p_conn_params = NULL;
    cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY;
    cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY;
    cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT;
    cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID;
    cp_init.disconnect_on_fail = false;
    cp_init.evt_handler = on_conn_params_evt;
    cp_init.error_handler = conn_params_error_handler;

    // �뿰寃� �뙆�씪誘명꽣 珥덇린�솕
    err_code = ble_conn_params_init(&cp_init);
}

uint8_t _BLE::getConnCount(){
	return ble_conn_state_central_conn_count();
}

void _BLE::nrf_qwr_error_handler(uint32_t nrf_error){
	// QWR 紐⑤뱢 �삤瑜� �빖�뱾�윭
	SEGGER_RTT_printf(0, "ERROR! : %d \n", nrf_error);
}

void _BLE::nus_data_handler(ble_nus_evt_t *p_evt){
	// Nordic UART 紐⑤뱢 �씠踰ㅽ듃 �빖�뱾�윭
	char ch[200];

    if(p_evt->type == BLE_NUS_EVT_RX_DATA){
    	// BLE로부터 DATA 수신 시
    	uint16_t recv_len = p_evt->params.rx_data.length;

    	// �뜲�씠�꽣 �씫湲�
    	for(uint8_t i=0;i<recv_len;i++){
    		rx_buffer[i] = p_evt->params.rx_data.p_data[i];
    	}
    	BluetoothLE_RecvHandler((uint8_t *)rx_buffer, recv_len);
    }

    if(p_evt->type == BLE_NUS_EVT_TX_RDY){
    	// �뜲�씠�꽣瑜� 蹂대궪 以�鍮꾧� �릺�뿀�쓣 �븣

    }
}

void _BLE::send(uint8_t *message, uint16_t length, uint8_t deviceNo){
	// Function for send data to Peripheral devices
	err_code = ble_nus_data_send(&nus, (uint8_t *)message, &length, h_connection);
	if ((err_code != NRF_ERROR_INVALID_STATE)
			&& (err_code != NRF_ERROR_RESOURCES)
			&& (err_code != NRF_ERROR_NOT_FOUND)){
		APP_ERROR_CHECK(err_code);
	}
}

void _BLE::send_c(uint8_t *message, uint16_t length){
	for(uint8_t i=0;i<NRF_SDH_BLE_CENTRAL_LINK_COUNT;i++){
		err_code = ble_nus_c_string_send(&m_nus_c_multi[i], message, length);
	}
	APP_ERROR_CHECK(err_code);
}

void _BLE::on_conn_params_evt(ble_conn_params_evt_t *p_evt){
	// �뿰寃� �뙆�씪誘명꽣 �씠踰ㅽ듃 �빖�뱾�윭
	SEGGER_RTT_printf(0, "%d\n", p_evt->evt_type);
    if(p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED){
    	err_code = sd_ble_gap_disconnect(h_connection, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
    }
}

void _BLE::conn_params_error_handler(uint32_t nrf_error){
	// Connection Params Error
}

void _BLE::gatt_evt_handler(nrf_ble_gatt_t *p_gatt, nrf_ble_gatt_evt_t const *p_evt){
	// GATT �씠踰ㅽ듃 �빖�뱾�윭
    if ((h_connection == p_evt->conn_handle) && (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED)){
        m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
    }
}

void _BLE::on_adv_evt(ble_adv_evt_t ble_adv_evt){
	// Advertising �씠踰ㅽ듃 �꽕�젙
    switch (ble_adv_evt){
        case BLE_ADV_EVT_FAST:
        	// Fast 紐⑤뱶濡� Advertising �븯怨� �엳�쓣 �븣�쓽 �룞�옉
            break;
        case BLE_ADV_EVT_IDLE:
        	// Idle �긽�깭�씪 �븣
            break;
        default:
            break;
    }
}

void _BLE::ble_evt_handler(ble_evt_t const *p_ble_evt, void *p_context){
	// BluetoothLE Event Handler 함수
	// GAP 이벤트 핸들러
	ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;

    switch (p_ble_evt->header.evt_id){
        case BLE_GAP_EVT_CONNECTED:
        	// 연결 되었을 때 이벤트 처리
        	err_code = ble_nus_c_handles_assign(&m_nus_c_multi[p_ble_evt->evt.gap_evt.conn_handle], p_ble_evt->evt.gap_evt.conn_handle, NULL);
        	APP_ERROR_CHECK(err_code);
            //h_connection = p_ble_evt->evt.gap_evt.conn_handle;
            isConnect = true;
            //err_code = nrf_ble_qwr_conn_handle_assign(&qwr, h_connection);
            err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);
            //err_code = ble_db_discovery_start(&m_db_disc_multi[p_gap_evt->conn_handle], p_ble_evt->evt.gap_evt.conn_handle);
            APP_ERROR_CHECK(err_code);

            sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_CONN, p_ble_evt->evt.gap_evt.conn_handle, 4);

            //Change MTU
            BluetoothLE_Conn_Handler(true);
            SEGGER_RTT_printf(0, "NUS Connected\n");
            break;

        case BLE_GAP_EVT_DISCONNECTED:
        	// 연결 해제 되었을 때 이벤트 처리
            h_connection = BLE_CONN_HANDLE_INVALID;
            isConnect = false;
            BluetoothLE_Conn_Handler(false);
            SEGGER_RTT_printf(0, "NUS Disconnected. Reason : 0x%02X\n", p_gap_evt->params.disconnected.reason);
            if(ble_conn_state_central_conn_count()<device_num){
            	startScan();
            }
            break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
            static ble_gap_phys_t phys;
            SEGGER_RTT_printf(0, "PHY Changed\n");
            phys.rx_phys = BLE_GAP_PHY_1MBPS;
            phys.tx_phys = BLE_GAP_PHY_1MBPS;
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
            break;

        default:
            break;
    }
}

void _BLE::db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
    ble_nus_c_on_db_disc_evt(&m_nus_c_multi[p_evt->conn_handle], p_evt);
}


void _BLE::ble_nus_c_evt_handler(ble_nus_c_t *p_ble_nus_c, ble_nus_c_evt_t const *p_ble_nus_evt){
	// NUS Client 이벤트 처리기
	ret_code_t err_code;

	// 이벤트 종류에 따라 처리
	switch(p_ble_nus_evt->evt_type){
	case BLE_NUS_C_EVT_DISCOVERY_COMPLETE:
		SEGGER_RTT_printf(0, "Discovery complete.\n");
		// 핸들 할당
		err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles);		APP_ERROR_CHECK(err_code);
		APP_ERROR_CHECK(err_code);

		// 디바이스 개수가 적을 경우 다시 스캔
		SEGGER_RTT_printf(0, "Connected to device with Nordic UART Service.\n");

		// Notification 활성화
		err_code = ble_nus_c_tx_notif_enable(p_ble_nus_c);
		APP_ERROR_CHECK(err_code);
		break;

	case BLE_NUS_C_EVT_NUS_TX_EVT:
		BluetoothLE_RecvHandler(p_ble_nus_evt->p_data, p_ble_nus_evt->data_len);
		break;

	case BLE_NUS_C_EVT_DISCONNECTED:
		SEGGER_RTT_printf(0, "BLE_NUS_C_EVT_DISCONNECTED.\n");
		break;
	}
}

void _BLE::nus_error_handler(uint32_t nrf_error){
	SEGGER_RTT_printf(0, "Error Error\n");
}

void _BLE::scan_evt_handler(scan_evt_t const *p_scan_evt){
    ret_code_t err_code;

    switch(p_scan_evt->scan_evt_id)
    {
         case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
         {
        	 SEGGER_RTT_printf(0, "Connecting Error\n");
              err_code = p_scan_evt->params.connecting_err.err_code;
         } break;

         case NRF_BLE_SCAN_EVT_CONNECTED:
         {
              ble_gap_evt_connected_t const * p_connected = p_scan_evt->params.connected.p_connected;
             // Scan is automatically stopped by the connection.
             SEGGER_RTT_printf(0, "Connecting to target %02x%02x%02x%02x%02x%02x\n",
                      p_connected->peer_addr.addr[0],
                      p_connected->peer_addr.addr[1],
                      p_connected->peer_addr.addr[2],
                      p_connected->peer_addr.addr[3],
                      p_connected->peer_addr.addr[4],
                      p_connected->peer_addr.addr[5]
                      );
             isConnect = true;
         } break;

         case NRF_BLE_SCAN_EVT_SCAN_TIMEOUT:
         {
        	 SEGGER_RTT_printf(0, "Scan timed out.\n");
         } break;

         case NRF_BLE_SCAN_EVT_NOT_FOUND:
        	 SEGGER_RTT_printf(0, "Not Found.\n");
        	 break;
         default:
             break;
    }
}

This is my source code for central role.

is it any problems on source?

RE: Multilink Central connection problems : 0x3e (BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED)

Kenneth — Tue, 20 Oct 2020 12:51:05 GMT

Hi,

When trying to establish connection, what is the scan window and interval, and what is the connection interval?

I suggest to set the scan window=interval=10ms, and the connection interval to for instance 100ms (or longer) if you want to connect several links at the same time.

Best regards,
Kenneth