Connecting via ANT+ to Garmin GSC10 ?

RE: Connecting via ANT+ to Garmin GSC10 ?

RixtronixLAB — Wed, 25 Nov 2020 14:11:59 GMT

Thanks,

It's running on S340, what function will I use for scanning GSC10 and display the data from it ?

RE: Connecting via ANT+ to Garmin GSC10 ?

Kenneth — Wed, 25 Nov 2020 08:54:02 GMT

You can for instance open the pca10040/s212 project that you want to turn into pca10056/s340 in notepad++, and compare with a project that is already setup for pca10056/s340. This should look something like this:

You can keep all pca10056, nrf52840, s340, ram and flash specific information in the project, but need to copy all include paths and similiar from the pca10040/s212 project. Then you will end up with something like this:

Remember that the include directories should point to the s340 instead of s212, else it's mostly copy and paste between the two. Finally you can rename the ant_msg_types_master_pca10056_s340.emproject (that I used for basis here) to for instance ant_bsc_rx_pca10056_s340.emproject.

I haven't tested the project, but the updated project based on the above is attached.

devzone.nordicsemi.com/.../1663.ant_5F00_bsc_5F00_rx_5F00_pca10056_5F00_s340.zip

RE: Connecting via ANT+ to Garmin GSC10 ?

RixtronixLAB — Tue, 24 Nov 2020 19:09:24 GMT

How can I migrate ant_bsc_rx_d52_s212.uvprojx to s340 ? what do I need to change ? thanks

RE: Connecting via ANT+ to Garmin GSC10 ?

RixtronixLAB — Tue, 24 Nov 2020 12:22:52 GMT

Thanks Kenneth

RE: Connecting via ANT+ to Garmin GSC10 ?

Kenneth — Tue, 24 Nov 2020 11:02:55 GMT

Hello,

I think this should be described here:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.0.2/ant_examples_bicycle_spd_cad.html

To work with ANT+ devices (or ANT+ simulator tools) you need to add the ANT+ network key (to ant_key_manager_config.h):
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.0.2/ant_examples_bicycle_spd_cad.html#ant_bsc_test_3

Best regards,
Kenneth