Makerdiary and segger embedded studio

RE: Makerdiary and segger embedded studio

awneil — Mon, 04 Jan 2021 17:46:17 GMT

[quote userid="2116" url="~/f/nordic-q-a/69803/makerdiary-and-segger-embedded-studio/287231#287231"]whether or not makerdiary ships the dongle with a bootloader (and how to access it) is something you need to check with them[/quote]

community.makerdiary.com/

RE: Makerdiary and segger embedded studio

Karthiknk — Mon, 04 Jan 2021 16:51:51 GMT

Thank you for your support. It was helpful.

RE: Makerdiary and segger embedded studio

ovrebekk — Mon, 04 Jan 2021 13:04:20 GMT

In order to flash and debug directly from SES you need to connect to the SWD interface on the dongle, which seems to be available on the side header based on their information (the RST, CLK and DIO pins):
https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/

You also need some kind of SWD programmer, but if you have a standard nRF52840DK you can use this as a debugger as discussed in this case.

In order for this to work it is important that the supply and GPIO voltage on the dongle is around 3V, but this seems to be the case based on the makerdiary page above.

If you want to program the device without using the SWD connection then the only option is to use a bootloader, but whether or not makerdiary ships the dongle with a bootloader (and how to access it) is something you need to check with them.

Best regards
Torbjørn

RE: Makerdiary and segger embedded studio

fyfoh — Sun, 03 Jan 2021 11:06:30 GMT

@awneil Please don't reply with this kind of garbage reply, it's not helpful.

RE: Makerdiary and segger embedded studio

awneil — Tue, 22 Dec 2020 14:41:52 GMT

[quote userid="95071" url="~/f/nordic-q-a/69803/makerdiary-and-segger-embedded-studio"]I bought this makerdiary nRF52840 dongle [/quote]

a what ?

[quote userid="95071" url="~/f/nordic-q-a/69803/makerdiary-and-segger-embedded-studio"]Can I use segger embedded studio and nrf connect with this makerdiary dongle[/quote]

Why don't you ask the "makerdiary" people? It's their product - so they should be able to give you details about their product.

Or just get a Nordic Dongle - then you know that Nordic will know all about it, and can support it ...