Thingy91 not recognized over USB

RE: Thingy91 not recognized over USB

Heidi — Mon, 15 Feb 2021 09:44:23 GMT

Hi! They've taken a look at the modem trace you provided and there are no issues with the device.

Most likely, the GPS isn't getting a fix because it's not finding any satellites.

Is the device under an open sky, i.e not inside or between skyscrapers or something like that?

You could also try configuring the application differently. Give the GPS a longer window by increasing the PSM active time (CONFIG_LTE_PSM_REQ_RAT).

Best regards,

Heidi

RE: Thingy91 not recognized over USB

alexmcgov1 — Thu, 11 Feb 2021 19:57:27 GMT

I am running v1.2.2 of the modem FW and have Thingy:91 1.4.0

RE: Thingy91 not recognized over USB

Heidi — Tue, 09 Feb 2021 07:46:27 GMT

Thank you.

What modem FW are you running? And what version of the Thingy:91 do you have?

RE: Thingy91 not recognized over USB

alexmcgov1 — Thu, 04 Feb 2021 22:41:03 GMT

Yes i did update both the nrf91 and nrf52.

Here is the modem trace:devzone.nordicsemi.com/.../trace_2D00_2021_2D00_02_2D00_04T22_2D00_39_2D00_52.106Z.bin

RE: Thingy91 not recognized over USB

Heidi — Thu, 04 Feb 2021 05:09:52 GMT

Are you able to take a modem trace when you're trying to get a GPS fix? And the log file from the application?

Did you update the application on both the nRF9160 SiP and the nRF52840 SoC?

RE: Thingy91 not recognized over USB

alexmcgov1 — Thu, 04 Feb 2021 00:29:15 GMT

I did get my hands on a SWD programmer and successfully updated the modem firmware and flashed the device with one of the hex files. I still run into the same problem though, I can connect the device to nRFCloud, and receive some subset of the data, but I cant seem to get a GPS fix. Ive tried with given SiM card and other ones ive had, with the appropriate hex file.

The signal strength does sometimes get reported, though its very low like -100dBm, which indicates its not connected to the network. I have tried it outdoors without any change.

RE: Thingy91 not recognized over USB

alexmcgov1 — Tue, 02 Feb 2021 23:48:08 GMT

Hi, sorry for the late reply. My Go version is 1.15.7 on windows

RE: Thingy91 not recognized over USB

Heidi — Mon, 25 Jan 2021 13:00:10 GMT

Hi, I'm not able to reproduce this error.

Is Go in your system path, and is the version 1.7 or later?

RE: Thingy91 not recognized over USB

alexmcgov1 — Thu, 21 Jan 2021 00:10:04 GMT

Hi Heidi,

Thanks for the reply. I did follow the additional steps to activate the gps and it doesnt seem to get a fix. I have tried it with both the iBasis sim ard, and another one I know works in my area.

I also tried following the steps to update the firmware using the MCUboot, and successfully downloaded GO, but am met with an error when trying to install mcumgr. The error I got was:

"C:\Users\mcgov>go get github.com/apache/mynewt-mcumgr-cli/mcumgr
# cd C:\Users\mcgov\go\src\golang.org\x\sys; git pull --ff-only
fatal: not a git repository (or any of the parent directories): .git
package golang.org/x/sys/windows: exit status 128
# cd C:\Users\mcgov\go\src\mynewt.apache.org\newtmgr; git pull --ff-only
fatal: not a git repository (or any of the parent directories): .git
package mynewt.apache.org/newtmgr/newtmgr/cli: exit status 128
cannot find package "mynewt.apache.org/newtmgr/newtmgr/config" in any of:
c:\go\src\mynewt.apache.org\newtmgr\newtmgr\config (from $GOROOT)
C:\Users\mcgov\go\src\mynewt.apache.org\newtmgr\newtmgr\config (from $GOPATH)
cannot find package "mynewt.apache.org/newtmgr/newtmgr/nmutil" in any of:
c:\go\src\mynewt.apache.org\newtmgr\newtmgr\nmutil (from $GOROOT)
C:\Users\mcgov\go\src\mynewt.apache.org\newtmgr\newtmgr\nmutil (from $GOPATH)
cannot find package "mynewt.apache.org/newtmgr/nmxact/nmserial" in any of:
c:\go\src\mynewt.apache.org\newtmgr\nmxact\nmserial (from $GOROOT)
C:\Users\mcgov\go\src\mynewt.apache.org\newtmgr\nmxact\nmserial (from $GOPATH)"

I tried various ways of downloading it, including downloading the tool from binary using MinGW terminal. I also checked the Github for mcumgr and tried cloning the repository from there.

Thanks,

Alex

RE: Thingy91 not recognized over USB

Heidi — Wed, 20 Jan 2021 13:11:51 GMT

Hi!

[quote user=""]I was able to connect the device to nrfCloud, and receive some sensor data, but not any GPS data.[/quote]

Can you confirm that you followed the extra steps to activate the GPS (i.e hold the button down and see the LED light change color)?

What you should do is update the FW on the nRF52840 first and then when that is completed, update the application FW and modem FW on the nRF9160.

The update the FW on the nRF52840 without using the Programmer application or having an SWD programmer, you can use mcumgr. This blog post Thingy:91 Firmware Update using MCUboot explains how to do this. It's a bit outdated, but make sure to use the .bin filed named "thingy91_nrf52_connectivity_bridge_dfu_<date>.bin" in "images_dfu_bin". You can download that here.

When this is completed, you should be able to update the nRF9160 SiP using the Programmer application.

Please let me know if you have any issues!

Best regards,

Heidi