Introducing a mixer on nRF24L01+

RE: Introducing a mixer on nRF24L01+

noel joe — Thu, 11 Feb 2021 17:22:05 GMT

Thank you very much I really appreciate the assistance

RE: Introducing a mixer on nRF24L01+

ketiljo — Thu, 11 Feb 2021 15:21:57 GMT

Please see the product specification https://infocenter.nordicsemi.com/pdf/nRF24L01P_PS_v1.0.pdf chapter 11 for the schematic of the nRF24L01+.

RE: Introducing a mixer on nRF24L01+

noel joe — Thu, 11 Feb 2021 14:38:44 GMT

So could you share any information on the components used on the module so that I can make a similar one?

Thank you

Noel Joe

RE: Introducing a mixer on nRF24L01+

ketiljo — Thu, 11 Feb 2021 10:26:30 GMT

As the nRF24L01+ is not made for such use, it will be a useful student exercise for you to see if you can make it work ;-)

RE: Introducing a mixer on nRF24L01+

noel joe — Thu, 11 Feb 2021 05:59:59 GMT

Thank you for the assistance. Could you also let me know if it's possible to measure the range of an obstacle using it, as it has the necessary components for it, or any information on how to build the nRF24L01+ so that I can modify it for my application?. Is it possible to get a detailed list of components used on the module? I would really appreciate your help.

Thank You

Noel Joe

RE: Introducing a mixer on nRF24L01+

ketiljo — Wed, 10 Feb 2021 13:21:21 GMT

That's not possible, sorry. There are no access to the RF part of the radio in the nRF24L01+. If you can add the mixer externally and use the radio with a constant carrier as an oscillator only, it might work. But you'd have to make the RX part with something else as the nRF24L01+ receiver can't be used here.