Problem flash my customer Board

RE: Problem flash my customer Board

Vidar Berg — Tue, 02 Mar 2021 10:20:12 GMT

Thanks for confirming, then it is not related to the clock speed at least. Is the debugger connected via a USB hub when it fails? If so, can you try to connect it directly to the PC?

RE: Problem flash my customer Board

alonmat — Sun, 28 Feb 2021 09:03:51 GMT

devzone.nordicsemi.com/.../8168.log.txt

RE: Problem flash my customer Board

alonmat — Sun, 28 Feb 2021 09:01:13 GMT

nrfjprog --clockspeed 125 --program "C:\Nordic\nRF5_SDK_17.0.2_d674dde\examples\ble_peripheral\ble_app_blinky\hex\ble_app_blinky_pca10040_s132.hex" --chiperase -r
Parsing image file.
Erasing user available code and UICR flash areas.
Applying system reset.
Checking that the area to write is not protected.
Programming device.
ERROR: JLinkARM DLL reported an error. Try again. If error condition
ERROR: persists, run the same command again with argument --log, contact Nordic
ERROR: Semiconductor and provide the generated log.log file to them.

RE: Problem flash my customer Board

Vidar Berg — Thu, 25 Feb 2021 12:10:48 GMT

Hello,

Interesting that you can write one word, but not a complete hex file. Could you please try to lower the SWD clock to see if it fixes the problem? Maybe the default clock speed setting is set to high.

e.g.

nrfjprog --program --clockspeed 1000 --program <hex file > --chiperase -r

Best regards,

Vidar