How to use Edge Impulse models in nrf5 SDK project

RE: How to use Edge Impulse models in nrf5 SDK project

Rafig — Thu, 09 Feb 2023 00:03:48 GMT

Didn't try there, so I don't know (never worked with nrf mesh sdk actually). I only tried with nRF5 SDK. But I think there is a chance that they will work if you apply the same logic.

RE: How to use Edge Impulse models in nrf5 SDK project

nandoo — Wed, 08 Feb 2023 23:39:06 GMT

are your modifications also work for the nrf mesh sdk 5.0.0 ? or is edge impulse not running on the nrf sdk mesh at all?

thanks alot

RE: How to use Edge Impulse models in nrf5 SDK project

Rafig — Mon, 13 Dec 2021 08:31:45 GMT

Hi Dave, please check the link below.

RE: How to use Edge Impulse models in nrf5 SDK project

Rafig — Mon, 13 Dec 2021 08:31:08 GMT

Hi, please check following:

Github repository that shows all modifications to make it run (nRF52 HW Dev Kit is sufficient to run, no external sensors needed)

https://github.com/RafigRzayev/nrf5sdk_edge_impulse_demo

Youtube video that explains everything done in github:

https://www.youtube.com/watch?v=Biad33G7DR4

These instructions don't use SES, but armgcc + VSCode.

Waiting for your feedback.

RE: How to use Edge Impulse models in nrf5 SDK project

Dave_couling — Tue, 07 Dec 2021 21:30:28 GMT

Look forward to hearing about how you did it!

RE: How to use Edge Impulse models in nrf5 SDK project

Rafig — Fri, 03 Dec 2021 12:28:22 GMT

Hi again, I got it to work. I'll share with you the details hopefully sometime next week.

RE: How to use Edge Impulse models in nrf5 SDK project

Thanos — Wed, 03 Nov 2021 14:01:22 GMT

No luck, unfortunately.

BR,

Thanos

RE: How to use Edge Impulse models in nrf5 SDK project

Rafig — Wed, 03 Nov 2021 10:18:43 GMT

Hi Thanos,

I also asked the same on their forum, no reply yet. https://forum.edgeimpulse.com/t/deploy-edge-impulse-to-nrf52832-via-nrf5-sdk/3024

I was wondering if you were able to integrate Edge Impulse model into the nrf5 SDK? If yes, can you please share how you did it?

RE: How to use Edge Impulse models in nrf5 SDK project

JONATHAN LL — Tue, 09 Mar 2021 13:45:37 GMT

Hi,

We do not support it directly in the nrf5 SDK. However it should be possible but we dont have any wrapper or such. I do recommend to contact the engineers over at EdgeImpulse for more details on how to best implement it if not using NCS/Zephyr or asking int he forums over there.

Regards,
Jonathan