Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

Hakon — Fri, 30 Apr 2021 14:01:50 GMT

Where did you get the certificates in the JSON from? The nrf cloud certificates should already be written to the modem when you receive the nrf9160 SiP.

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

evren.kenanoglu — Wed, 28 Apr 2021 12:52:58 GMT

Hi again,

I checked "you can look at this." I'm not 100 percent sure what I have to do but I understood that at the first I have to register this device to nrf-cloud.

So here's what I have done:

- I made exact changes in the file CONFIG_NRF_CLOUD_CLIENT_ID_PREFIX="own".

- I created a json file which includes these informations;

- After that opened LTE-Monitor and load from Json file and update the certificates.

- I reset the board. But still, I get the same error when adding the device on the cloud side.

I don't know I'm not sure if I know how to register this device.

I didn't see or maybe I didn't understand how to register this device to the cloud.

I really need a basic solution that goes step by step for that registery.

Any help?

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

Hakon — Tue, 27 Apr 2021 10:23:54 GMT

[quote user="evren.kenanoglu"]3. I don't have any HWID number or PIN number on the board. (I don't know what should I write here!)[/quote]

You get the PIN number when generating the certificate. You can look at this.

[quote user="evren.kenanoglu"]5. I don't know in which format I have to write IMEI number. ( nrf-<IMEI> or <IMEI> or own-<IMEI)[/quote]

As jing mentioned, you should add your own prefix to the IMEI number.

Also, make sure your device is connected to the cloud before trying to register.

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

evren.kenanoglu — Wed, 21 Apr 2021 10:12:57 GMT

Any updates?

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

evren.kenanoglu — Wed, 07 Apr 2021 09:42:49 GMT

I haven't tried that one, because I'm currently away from the development kit. I will try and I will tell if that works. Thank you for your support.

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

evren.kenanoglu — Wed, 07 Apr 2021 09:42:03 GMT

Let's go to step by step;

1. I have an Icarus Board and this Icarus board has nrf9160 on the board.

2. I built the cloud_client example project for the board and flashed to the device. I'm debugging it with J-Link. Everything looks okay.

3. I don't have any HWID number or PIN number on the board. (I don't know what should I write here!)

4. I get the IMEI number from the device sending some commands to the board while it runs.

5. I don't know in which format I have to write IMEI number. ( nrf-<IMEI> or <IMEI> or own-<IMEI)

Now you have a better picture I guess.

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

Hakon — Wed, 07 Apr 2021 08:52:59 GMT

Have you checked what the documentation says about the error code?

"The device cannot be found in the device registry, i.e., it is not "known" by the IoT cloud platform. Possible reasons:

You entered the device id and/or ownership code (PIN or HWID) incorrectly.
Before attempting association, you did not wait for the LEDs to indicate the device was provisioned.
Corrupt modem firmware.
Corrupt, wrongly flashed, or illegitimate device certificates.
Poor LTE connection"

I asked the cloud team and they said the device isn't even getting connected to the nRF cloud.

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

jing — Thu, 01 Apr 2021 03:39:49 GMT

hello,

Try adding a prefix to your imei as Device ID. ex. own-<imei>

Then add CONFIG_NRF_CLOUD_CLIENT_ID_PREFIX="own" to your prj.conf.

jing

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

Hakon — Wed, 31 Mar 2021 15:09:12 GMT

Hello,

I will need to consult with cloud team about this. I hope to give you an answer on Monday.

RE: Registering a 3rd Party Board(Actinius Icarus) to Nrf Cloud

evren.kenanoglu — Fri, 26 Mar 2021 08:31:01 GMT

I'm sorry I forgot to add that.